New insights into the effect of adsorption on catalysis in the metal-free persulfate activation process for removing organic pollutants

Separation and reutilization of heavy metal ions in wastewater assisted by p-BN adsorbent

Extracting heavy metal ions from wastewater has significant implications for both environmental remediation and resource preservation. However, the conventional adsorbents still suffer from incomplete ion removal and low utilization efficiency of the recovered metals. Herein, we present an extraction and reutilization method assisted by porous boron nitride (p-BN) containing high-density N atoms for metal recovery with simultaneous catalyst formation. The p-BN exhibits stable and efficient metal adsorption performance, particularly for ultra-trace-level water purification. The distribution coefficients towards Pb2+, Cd2+, Co2+ and Fe3+ can exceed 106 mL g-1 and the residual concentrations that reduced from 1 mg L-1 to 0.8-1.3 μg L-1 are much lower than the acceptable limits in drinking water standards of World Health Organization. Meanwhile, the used p-BN after Co ion adsorption can be directly adopted as a high-efficiency catalyst for activating peroxymonosulfate (PMS) in organic pollutant degradation without additional post-treatment, avoiding the secondary metal pollution and the problems of neglected manpower and energy consumption. Moreover, a flow-through multistage utilization system assisted by p-BN/polyvinylidene fluoride (PVDF) membrane is constructed for achieving both metal ion separation and reutilization in the removal of organic pollutants, providing a new avenue for sustainable wastewater remediation.

Zeolitic imidazolate frameworks as effective crystalline supports for aspergillus-based laccase immobilization for the biocatalytic degradation of carbamazepine

In this study, zeolitic imidazolate frameworks (ZIF) were employed as effective porous supports for laccase enzyme attachment and further explored synergistic adsorption and biocatalytic degradation of carbamazepine (CBZ) in aqueous solutions. Characterization results from FTIR and NMR analysis confirmed successful incorporation of the laccase enzyme onto ZIF particles. Further analyses from SEM and TEM revealed rhombic dodecahedral morphologies of ZIF crystals with crusts of the enzyme observed on the particles' surface. The carbamazepine degradation results showed that immobilization of the laccase improved its stability and resistance at various pH's, in comparison to the free enzyme. The immobilized laccase also exhibited relatively higher activities across the studied temperature range compared to the free form. Kinetic studies revealed a negligible decline in velocity, Vmax after immobilization, evaluated to be 0.873 and 0.692 mg L-1 h-1 for the free and immobilized laccase, respectively. The immobilized laccase demonstrated improved stabilities towards organic solvents, which qualifies the composite's application in real wastewater samples. In which case, the laccase-ZIF composite proved effective in CBZ decontamination with an efficiency of ∼92%. Furthermore, the immobilized laccase exhibited appreciable storage stabilities (∼70% residual activity) for up to 15 days before any significant loss in activity.

ZIF-67(Co)-Loaded Filter Paper for In Situ Catalytic Degradation of Bisphenol A in Water

Herein, we loaded cobalt-based zeolite imidazolate frameworks, ZIF-67 (Co), onto commercial filter paper to prepare catalytic filter paper (ZFP) for the in situ degradation of bisphenol A (BPA) in water by activating peroxymonosulfate. The results showed that ZIF-67 (Co) was densely and uniformly distributed on the surface of the filter paper. The prepared ZFP could effectively degrade BPA in situ through a gravity-driven filtration process. Specifically, when the flow rate of the BPA solution passing through ZFP was lower than 10 mL/min, 0.02 mM of BPA could be completely degraded by ZFP. Furthermore, ZFP showed promising water matrix adaptability, which could provide promising BPA degradation efficiency in a wide pH range or in the existence of multiple anions. The scavenging tests demonstrated that both sulfate radical and hydroxyl radical were generated for BPA degradation, in which hydroxyl radical was the dominant active species. The ZFP also exhibited promising long-time use stability with a high mineralization rate. This study provides a novel method to prepare high-efficient catalyst paper for the in situ organic pollutant removal in water media via a prompt filtration process.

Waste preserved wood derived biochar catalyst for promoted peroxymonosulfate activation towards bisphenol A degradation with low metal ion release: The insight into the mechanisms

The rational disposal of waste preserved wood is of great significance since its embedded metals (Cu, As, and Cr) pose potential threat to environment and human health. In this study, a biochar catalyst derived from waste preserved wood (PWB) was prepared for the degradation of bisphenol A (BPA) via peroxymonosulfate (PMS) activation. The PWB exhibited prominent catalytic degradation capability towards BPA compared with common wood derived biochar (CWB). Further tests and analysis elucidated that both radical species (OH) and non-radical species (¹O₂) were generated by the PWB/PMS system, whereas only ¹O₂ was detected in CWB/PMS system. Specifically, the metal compounds, especially metallic Cu in the PWB activated PMS via radical pathway, and the CO groups in the biochar generated the non-radical pathway, the coexistence of which resulted in higher BPA degradation rate in PWB/PMS system. It was also demonstrated that the heavy metal ion leaching (As and Cr) in PWB/PMS system was negligible. Furthermore, the biochar could effectively inhibit the leakage of oxidized Cu ions. This study provides a novel approach to prepare high-efficient carbocatalysts for organic pollutant degradation in water, which also enables the waste preserved wood with an environmental nondestructive mode of dispatch.

Efficient degradation of organic dyes using peroxymonosulfate activated by magnetic graphene oxide

Magnetic graphene oxide (MGO) was prepared and used as a catalyst to activate peroxymonosulfate (PMS) for degradation of Coomassie brilliant blue G250 (CBB). The effects of operation conditions including MGO dosage, PMS dosage and initial concentration of CBB were studied. CBB removal could reach 99.5% under optimum conditions, and high removals of 98.4–99.9% were also achieved for other organic dyes with varied structures, verifying the high efficiency and wide applicability of the MGO/PMS catalytic system. The effects of environmental factors including solution pH, inorganic ions and water matrices were also investigated. Reusability test showed that CBB removals maintained above 90% in five consecutive runs, indicating the acceptable recyclability of MGO. Based on quenching experiments, solvent exchange (H₂O to D₂O) and in situ open circuit potential (OCP) test, it was found that ˙OH, SO₄˙⁻ and high-valent iron species were responsible for the efficient degradation of CBB in the MGO/PMS system, while the contributions of O₂˙⁻, ¹O₂ and the non-radical electron-transfer pathway were limited. Furthermore, the plausible degradation pathway of CBB was proposed based on density functional theory (DFT) calculations and liquid chromatography-mass spectrometry (LC-MS) results, and toxicity variation in the degradation process was evaluated by computerized structure–activity relationships (SARs) using green algae, daphnia, and fish as indicator species.

Efficient degradation of organic dyes with PMS and magnetic graphene oxide.

Enhanced degradation of bisphenol A by mixed ZIF derived CoZn oxide encapsulated N-doped carbon via peroxymonosulfate activation: The importance of N doping amount

In this study, mixed metal cobalt zinc oxide embedded nitrogen enriched porous carbon composites (CoZnO-PC) were prepared via pyrolyzing polyvinylpyrrolidone (PVP) encapsulated Co, Zn-bimetal centered zeolitic imidazolate frameworks (ZIF). The prepared composites were then used to activate peroxymonosulfate (PMS) for bisphenol A (BPA) removal in water. When mole ratio of Co/Zn was 2/1, the resulted Co₂Zn₁O-PC possessed spinel structure with prominent degradation capability, in which the introduction of Zn accelerated the PMS activation performance of Co through establishing bimetal synergistic interactions. Both radical and non-radical activation pathways were existed in the Co₂Zn₁O-PC/PMS system, in which Co₂Zn₁O dominated the radical pathway whereas PC dominated the non-radical way. Since PVP contained abundant nitrogen atoms and could form strong coordination interactions with the ZIF precursor, the introduction of PVP in the ZIF precursor prevented pore collapsing during pyrolysis process, as well as enhancing the nitrogen content in the pyrolzed composites, which significantly promoted the generation of singlet oxygen. With combined pathways, the Co₂Zn₁O-PC/PMS system showed a wide pH application range with promising mineralization rate. Meanwhile, the spinel-structured Co₂Zn₁O-PC was magnetically separable with desirable recyclability. This study presents a novel composite with remarkable performance for the removal of refractory organic pollutants in municipal wastewater.