Improved NH3-N conversion efficiency to N2 activated by BDD substrate on NiCu electrocatalysis process

A chemical coating strategy for assembling a boron-doped diamond anode towards electrocatalytic degradation of late landfill leachate

The high efficiency electrocatalytic degradation of late landfill leachate is still not an easy task due to the complexity and variability of organic pollutants. A chemical coating strategy for assembling a boron-doped diamond anode (BDD) towards electrocatalytic degradation of late landfill leachate was adopted and studied. The results shows the high removal rates of organic carbon (TOC) and ammonia nitrogen (NH3-N) after electrochemical oxidation for 5 h can reach 99% and 100%. Further, the organic migration and transformation depends on current density, A/V value, initial pH, electrochemical degradation time, and composition of the stock solution. Specifically, alkaline conditions can increase both TOC and NH3-N removal rates, which is reflected in the NH3-N removal rate of 100% when the pH is 8.5 after only 5 h. The types of organic matter decreased from 63 species to 24 species in 5 h, in which the removal of fulvic acids is superior to that of soluble biometabolites. Amides/olefins and phenolic alcohols are all degraded and converted into other substances or decomposed into CO2 and H2O by BDD, accompanied by the continuous decomposition of alcohol-phenols into alkanes. In all, this study provides a core reference on electrocatalytic degradation of late landfill leachate.

The Enhanced Performance of NiCuOOH/NiCu(OH)2 Electrode Using Pre-Conversion Treatment for the Electrochemical Oxidation of Ammonia

Electrochemical oxidation of ammonia is an attractive process for wastewater treatment, hydrogen production, and ammonia fuel cells. However, the sluggish kinetics of the anode reaction has limited its applications, leading to a high demand for novel electrocatalysts. Herein, the electrode with the in situ growth of NiCu(OH)2 was partially transformed into the NiCuOOH phase by a pre-treatment using highly oxidative solutions. As revealed by SEM, XPS, and electrochemical analysis, such a strategy maintained the 3D structure, while inducing more active sites before the in situ generation of oxyhydroxide sites during the electrochemical reaction. The optimized NiCuOOH-1 sample exhibited the current density of 6.06 mA cm-2 at 0.5 V, which is 1.67 times higher than that of NiCu(OH)2 (3.63 mA cm-2). Moreover, the sample with a higher crystalline degree of the NiCuOOH phase exhibited lower performance, demonstrating the importance of a moderate treatment condition. In addition, the NiCuOOH-1 sample presented low selectivity (<20%) towards NO2- and stable activity during the long-term operation. The findings of this study would provide valuable insights into the development of transition metal electrocatalysts for ammonia oxidation.

Nickel-based catalysts for electrolytic decomposition of ammonia towards hydrogen production

Nickel is an attractive metal for electrochemical applications because it is abundant, cheap, chemically resilient, and catalytically active towards many reactions. Nickel-based materials (metallic nickel, its alloys, oxides, hydroxides, and composites) have been also considered as promising electrocatalysts for ammonia oxidation. The electrolysis of ammonia aqueous solution results in evolution of gaseous hydrogen and nitrogen. Up to date studies showed that metallic Ni and Ni (hydro)oxides are not catalytically active unless they are electrochemically converted to NiOOH at ~1.3 V vs. RHE. Then, dehydrogenation of NH3 begins with electron coupled proton transfer to NiOOH resulting in a would-be reversible reduction of the latter to Ni(OH)2. Unlike the water electrolysis process, in which solely oxygen is obtained at the anode, during ammonia electrooxidation apart from release of N2, many undesired oxygenated nitrogen moieties may also turn up. These products appear after at least partial dehydrogenation of ammonia. Studies on NiOOH activity have been conducted for systems containing various modifiers, e.g., Cu, Co, S, P, however, their particular role in catalytic activity has not yet been elucidated. Nowadays research is being conducted in the direction of increasing the activity, selectivity, and stability of NiOOH. In this review, the electroactivity of Ni is analyzed and discussed in accordance with its oxidation states along with the ammonia oxidation mechanism. The main research problems to be solved and challenges for the future industrial use of ammonia are presented.

Improved mineralization and total nitrogen reduction by combination of electro-reduction and electro-oxidation for nitrophenol removal

In this work, p-Nitrophenol (p-NP) was electro-chemically removed by using a prepared Co₃O₄/Ti cathode and a BDD anode to achieve the simultaneous reduction of total organic carbon (TOC), total nitrogen (TN) and toxicity. The prepared Co₃O₄/Ti cathode showed higher electro-activity than the Ti cathode towards p-NP reduction with the removal rate higher than 90.6% but without mineralization. The electro-oxidation removed 84.3% of TOC but none of TN. To develop an optimized process for mineralization and TN removal during p-NP electrolysis, the combination of electro-oxidation and electro-reduction were evaluated by using a dual-chamber cell and a single-chamber cell, respectively. As a result of the re-oxidation and re-reduction in the single-chamber cell, the typically used mode of the simultaneous redox, showed a lower removal of TOC and TN than the combination processes as well as an increased toxicity. The TN removal for both combined modes (21.0%-32.9%) was all higher than that of the mode of reduction because the produced inorganic nitrogen such as ammonia and nitrate could be partially oxidized or reduced to nitrogen gas. The results suggested that the combination process could significantly improve the mineralization and TN reduction for p-NP removal, accompanied with 60.3% decrease of acute toxicity for the reduction after oxidation mode.

A Robust Approach to In Situ Exsolve Highly Dispersed and Stable Electrocatalysts

Catalysts made of in situ exsolved metal nanoparticles often demonstrate promising activity and high stability in many applications. However, the traditional approach is limited by perovskites as prevailing precursor and requires high temperature typically above 900 K. Here, with the guidance of theoretical calculation, an unprecedented and substantially facile technique is demonstrated for Cu nanoparticles exsolved from interstitially Cu cations doped nickel-based hydroxide, which is accomplished swiftly at room temperature and results in metal nanoparticles with a quasi-uniform size of 4 nm, delivering an exceptional CO faradaic efficiency of 95.6% for the electrochemical reduction of CO₂ with a notable durability. This design principle is further proven to be generally applicable to other metals and foregrounded for guiding the development of advanced catalytic materials.