Mg2(dobdc) crystals adhere to Matrimid matrix membranes bridged by diethylenetriamine (DETA) as an adhesion agent for efficient CO2 separation

RSM Modeling and Optimization of CO2 Separation from High CO2 Feed Concentration over Functionalized Membrane

The challenges in developing high CO₂ gas fields are governed by several factors such as reservoir condition, feed gas composition, operational pressure and temperature, and selection of appropriate technologies for bulk CO₂ separation. Thus, in this work, we report an optimization study on the separation of CO₂ from CH₄ at high CO₂ feed concentration over a functionalized mixed matrix membrane using a statistical tool, response surface methodology (RSM) statistical coupled with central composite design (CCD). The functionalized mixed matrix membrane containing NH₂-MIL-125 (Ti) and 6FDA-durene, fabricated in our previous study, was used to perform the separation performance under three operational parameters, namely, feed pressure, temperature, and CO₂ feed concentration, ranging from 3.5–12.5 bar, 30.0–50.0 °C and 15–70 mol%, respectively. The CO₂ permeability and CO₂/CH₄ separation factor obtained from the experimental work were varied from 293.2–794.4 Barrer and 5.3–13.0, respectively. In addition, the optimum operational parameters were found at a feed pressure of 12.5 bar, a temperature of 34.7 °C, and a CO₂ feed concentration of 70 mol%, which yielded the highest CO₂ permeability of 609.3 Barrer and a CO₂/CH₄ separation factor of 11.6. The average errors between the experimental data and data predicted by the model for CO₂ permeability and CO₂/CH₄ separation factor were 5.1% and 3.3%, respectively, confirming the validity of the proposed model. Overall, the findings of this work provide insights into the future utilization of NH₂-MIL-125 (Ti)/6FDA-based mixed matrix membranes in real natural gas purification applications.