Boosted photocatalytic NO removal performance by S-scheme hierarchical composites WO3/Bi4O5Br2 prepared through a facile ball-milling protocol

Jointly augmented photocatalytic NO removal by S-scheme Bi12SiO20/Ag2MoO4 heterojunctions with surface oxygen vacancies

The deep oxidation of NO molecules to NO₃^- species with the avoidance of toxic NO₂ generation is a big and challengeable concern, which can be solved by the rational design and construction of catalytic systems with satisfactory structural and optical features. For such, in this investigation binary composites Bi₁₂SiO₂₀/Ag₂MoO₄ (BSO-XAM) were fabricated through a facile mechanical ball-milling route. From microstructural and morphological analyses, heterojunction structures with surface oxygen vacancies (OVs) were simultaneously created, contributing to the enhanced visible-light absorption, reinforced migration and separation of charge carries, and further boosted generation of reactive species such as superoxide radicals and singlet oxygen. Based on the density-functional theory (DFT) calculations, surface OVs induced the strengthened adsorption and activation of O₂, H₂O, and NO molecules and oxidation of NO to NO₂, while heterojunction structures were beneficial for the continuous oxidation of NO₂ to NO₃^- species. Thus, the heterojunction structures with surface OVs synergistically guaranteed the augmented photocatalytic NO removal and constrained NO₂ generation of BSO-XAM through a typical S-scheme model. This study may provide scientific guidances for the photocatalytic control and removal of NO at ppb level by Bi₁₂SiO₂₀-based composites through the mechanical ball-milling protocol.

Photoelectrochemical biosensor for DNA demethylase detection based on enzymatically induced double-stranded DNA digestion by endonuclease-exonuclease system and Bi4O5Br2-Au/CdS photoactive material

A novel photoelectrochemical (PEC) biosensor for the detection of DNA demethylase MBD2 was developed based on Bi₄O₅Br₂-Au/CdS photosensitive material. Bi₄O₅Br₂ was firstly modified with gold nanoparticles (AuNPs), following with the modification onto the ITO electrode with CdS to realize the strong photocurrent response as a result of AuNPs had good conductibility and the matched energy between CdS and Bi₄O₅Br₂. In the presence of MBD2, double-stranded DNA (dsDNA) on the electrode surface was demethylated, which triggered the digestion activity of endonuclease HpaII to cleave dsDNA and induced the further cleavage of the dsDNA fragment by exonuclease III (Exo III), causing the release of biotin labeled dsDNA and inhibiting the immobilization of streptavidin (SA) onto the electrode surface. As a results, the photocurrent was increased greatly. However, in the absence of MBD2, HpaII digestion activity was inhibited by DNA methylation modification, which further caused the failure in the release of biotin, leading to the successful immobilization of SA onto the electrode to realize a low photocurrent. The sensor had a detection of 0.3-200 ng/mL and a detection limit was 0.09 ng/mL (3σ). The applicability of this PEC strategy was assessed by studying the effect of environmental pollutants on MBD2 activity.

The Strengthened Photocatalytic NOx Removal of Composites Bi4O5Br2/BiPO4: The Efficient Regulation of Interface Carriers by Integrating a Wide-Bandgap Ornament

A series of binary composites Bi₄O₅Br₂/BiPO₄ (PBX) was fabricated through a simple mechanical ball milling protocol. Relevant microstructural, morphological, and optical properties were thoroughly analyzed via various techniques. The integration of both components was confirmed to produce heterojunction domains at the phase boundaries. Upon exposure to visible light irradiation, the as-achieved PBX series possessed the reinforced photocatalytic NO_x removal efficiencies and the weakened generation of toxic intermediate NO₂ in comparison to both bare components, chiefly attributed to the efficient transport and separation of carriers and boosted production of superoxide radicals (·O₂^-) through the combination of a wide-bandgap ornament BiPO₄ as an electron acceptor. In particular, the composite PB5 with the optimal phase composition exhibited the highest NO_x removal of 40% with the lowest NO₂ formation of 40 ppb among all tested candidates. According to the band structures' estimation and reactive species' detection, a reasonable mechanism was ultimately proposed to describe the migration of charge carriers and the enhancement of photocatalytic performance.

Preparation of Ag3PO4/CoWO4 S-scheme heterojunction and study on sonocatalytic degradation of tetracycline

In this study, 0.6Ag3PO4/CoWO4 composites were synthesized by hydrothermal method. The prepared materials were systematically characterized by techniques of scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), N2 adsorption/desorption, and UV-vis diffuse reflectance spectrum (DRS). Furthermore, the sonocatalytic degradation performance of 0.6Ag3PO4/CoWO4 composites towards tetracycline (TC) was investigated under ultrasonic radiation. The results showed that, combined with potassium persulfate (K2S2O8), the 0.6Ag3PO4/CoWO4 composites achieved a high sonocatalytic degradation efficiency of 97.89 % within 10 min, which was much better than bare Ag3PO4 or CoWO4. By measuring the electrochemical properties, it was proposed that the degradation mechanism of 0.6Ag3PO4/CoWO4 is the formation of S-scheme heterojunction, which increases the separation efficiency of electron-hole pairs (e--h+) and generates more electrons and holes, thereby enhancing the degradation activity. The scavenger experiments confirmed that hole (h+) was the primary active substance in degrading TC, and free radicals (OH) and superoxide anion radical (O2-) were auxiliary active substances. The results indicated that 0.6Ag3PO4/CoWO4 nanocomposites could be used as an efficient and reliable sonocatalyst for wastewater treatment.

FabricatingZ-scheme C-doped TiO2/rGO nanocomposites for enhanced photocatalytic NO removal

It is attractive to explore practical approaches to optimize the photodegraded NO property of TiO₂. Herein, a typicalZ-shaped heterojunction C-TiO₂/rGO composed of carbon-doped TiO₂and reductive graphene oxide (rGO) was constructed to optimize the NO removal efficiency through anin situone-pot hydrothermal process with glucose as reductant and dopant. The C-TiO₂/rGO (0.11%) composite displays a remarkable NO removal performance of 40.6% under visible light illumination. It was found that the C-TiO₂nanoparticles were tightly attached to the rGO sheets and had strong interactions with rGO, which induced a positive impact on not only the light absorption and photo-generated charge separation but also the NO adsorption and reactive oxygen species formation, resulting in boosted photodegrade NO activity. As to the photodegrade NO process over the C-TiO₂/rGO, the HO^•and O₂^•-were the dominant radicals, of which the O₂^•-radical originated from the interactions between C-TiO₂and rGO. We proposed aZ-scheme mechanism to illuminate the advanced photocatalytic activity of C-TiO₂/rGO. This work affords an approach to developing effective photocatalysts in the NO purification field.

In-situ construction of step-scheme MoS2/Bi4O5Br2 heterojunction with improved photocatalytic activity of Rhodamine B degradation and disinfection

In this paper, a novel Step-scheme MoS₂/Bi₄O₅Br₂ heterojunction was fabricated through the in-situ mechanical agitation method and the photocatalytic activity of that was examined by the photocatalytic degradation Rhodamine B (RhB) and inactivation of E.coli under visible light irradiation (λ > 420 nm). The Step-scheme MoS₂/Bi₄O₅Br₂ heterojunctions displayed the enhanced photocatalytic ability compared to pure Bi₄O₅Br₂ and MoS₂ and the MoS₂/Bi₄O₅Br₂-3% (MS/BOB-3) heterojunction exhibited the strongest photocatalytic activity which can completely inactivate the 1 × 10⁷ cfu/mL with 180 min and degrade RhB (10 mg/L) with 24 min visible light irradiation, respectively. The photocatalytic mechanism of the MoS₂/Bi₄O₅Br₂ heterojunction is was attributed to the generated active species (h⁺, ·O₂^- and ·OH) which can effectively destroy RhB molecular and cell-membrane of bacterial as demonstrated by multiple techniques such as LC-MS and fluorescence stain. Additionally, characterization results disclosed that the transfer pathway of charge carriers of constructed MoS₂/Bi₄O₅Br₂ heterojunction followed the Step-scheme channel, which not only facilitated the separation and migration of the photo-generated charge carriers, but also improved the light absorption ability of the samples and resulting in the promoted photocatalytic performance of MoS₂/Bi₄O₅Br₂ heterojunction. This work paves a new idea to develop novel bismuth oxyhalide-based photocatalytic system for wastewater purification.

In situ construction of a C3N5 nanosheet/Bi2WO6 nanodot S-scheme heterojunction with enhanced structural defects for the efficient photocatalytic removal of tetracycline and Cr(vi)

A novel 2D/0D C3N5/Bi2WO6 S-scheme heterojunction with enhanced structural defects has been designed for the efficient elimination of pharmaceutical antibiotics and Cr(vi).