Peroxydisulfate activation by digestate-derived biochar for azo dye degradation: Mechanism and performance

Constructing an orderly electron transport channel on boron regulated biomass carbon fiber for selective ROS generation and water decontamination

Antibiotic pollution has raised widely attention due to the difficult biodegradation and lasting toxicity to public health, metal-free material based heterogeneous catalysis is a highly-promise and eco-friendly technology for organics elimination. Herein, boron doped biomass carbon fiber (B-CF) was synthesized to construct orderly electron transport channels for enhancing catalytic performance and deeply purifying organics polluted water. Integrating systematical quenching experiments and EPR detection, O2·- and 1O2 are found to be dominating reactive oxygen species (ROS) for norfloxacin (NOR) degradation rather than ∙OH or SO4∙-. Adsorption, catalytic degradation in pristine CF/peroxodisulfate (PDS) and B-CF/PDS systems, electrochemical tests, and theory calculations were compared and the results suggested B-CF surface can trigger intense electron transfer via simultaneous activating NOR and PDS, and electrons transferred from NOR to B-CF-PDS compound, resulting in selective and remarkably enhanced ROS generation. Moreover, it was found that B-CF exhibited surprising adsorption capacity for NOR (834.4 mg g-1), and it can also remove SO42- from the solution through electrostatic attraction. This B-CF/PDS system is efficient within a wide operation pH from 3 to 11 and exhibits long lasting activity (> 274 h maintaining over 80% efficiency). This study unveils the highly selective formation of O2-· and 1O2 and solves the short lifetime of catalysts in persulfate-based catalysis, which provides feasible technology for advanced water purification.

Digestate-derived carbonized char and activated carbon: Application perspective

The flourishment of anaerobic digestion (AD) on waste treatment emphasizes the importance of digestate valorization, which plays an essential role in determining the benefits provided by the AD process. The perception of digestate gradually shifts from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. This review first outlined the current status of digestate valorization, focusing on thermal-chemical methods. The novel valorization methods were then summarized from the recent research, illustrating prospects for digestate valorization. Limits and perspectives are finally addressed. Methods for preparing digestate-derived activated carbon and impurity effects were elucidated. Inherent mineral content/inorganic impurity could be a niche for downstream use. High surface area and well-developed pore structure are essential for satisfying downstream use performance, but they are not the only factors. Digestate char applications other than use as an energy fuel are suggested.

Nonradical electron transfer-based peroxydisulfate activation by a Mn-Fe bimetallic oxide derived from spent alkaline battery for the oxidation of bisphenol A

Mn-Fe bimetallic oxide has been employed as an outstanding peroxydisulfate (PDS) activator, but the underlying mechanism is still controversial. In this work, Mn_0.27FeO_4.55 (MFBO) was synthesized using the recovered waste alkaline battery and its catalytic activity and mechanism for PDS activation were explored in detail. Results show that MFBO exhibited a higher catalytic activity than the individual single metal oxides (FeO_x and Mn₂O₃) due to the synergistic effect between Fe and Mn elements. The removal efficiency of bisphenol A (BPA) with an initial concentration of 10 mg/L reached 97.8% within 90 min in the presence of 0.5 g/L MFBO and 2.0 mM PDS. Moreover, the MFBO maintained high stability and reusability even after being recycled for five times. With the aid of a series of experiments and ex-situ/in-situ characterizations, a non-radical PDS activation mechanism was proposed, in which organic contaminants would be oxidized through a direct electron transfer pathway mediated by the metastable reactive complexes (MFBO-PDS*). Notably, the MFBO/PDS system revealed selective oxidation towards different organic pollutants and the reaction rates were closely related to their structures and properties. The research provided an effective alternation process for application of the waste battery, as well as developed a novel perspective for removal of recalcitrant aqueous contaminants through a nonradical mechanism.

Oxidation-Induced and Hydrothermal-Assisted Template-Free Synthesis of Mesoporous CeO2 for Adsorption of Acid Orange 7

Hydrogen peroxide (H2O2), an accessible and eco-friendly oxidant, was employed for the template-free hydrothermal synthesis of mesoporous CeO2 based on a cerium carbonate precursor (Ce2(CO3)3•xH2O). Its microstructure and physicochemical properties were characterized by XRD, TEM and N2 sorption techniques. The formation of the CeO2 phase with a porous structure was strongly dependent on the presence of H2O2, while the values of the BET surface area, pore diameter and pore volume of CeO2 were generally related to the amount of H2O2 in the template-free hydrothermal synthesis. The BET surface area and pore volume of the mesoporous CeO2 synthesized hydrothermally at 180 °C with 10 mL H2O2 were 112.8 m2/g and 0.1436 cm3/g, respectively. The adsorption process had basically finished within 30 min, and the maximum adsorption efficiency within 30 min was 99.8% for the mesoporous CeO2 synthesized hydrothermally at 140 °C with 10 mL, when the initial AO7 concentration was 120 mg/L without pH preadjustment. The experimental data of AO7 adsorption were analyzed using the Langmuir and Freundlich isotherm modes. Moreover, the mesoporous CeO2 synthesized at 140 °C with 10 mL H2O2 was regenerated in successive adsorption–desorption cycles eight times without significant loss in adsorption capacity, suggesting that the as-synthesized mesoporous CeO2 in this work was suitable as an adsorbent for the efficient adsorption of AO7 dye from an aqueous solution.

Surface Modification of Biochar for Dye Removal from Wastewater

Nowadays, biochar is being studied to a great degree because of its potential for carbon sequestration, soil improvement, climate change mitigation, catalysis, wastewater treatment, energy storage, and waste management. The present review emphasizes on the utilization of biochar and biochar-based nanocomposites to play a key role in decontaminating dyes from wastewater. Numerous trials are underway to synthesize functionalized, surface engineered biochar-based nanocomposites that can sufficiently remove dye-contaminated wastewater. The removal of dyes from wastewater via natural and modified biochar follows numerous mechanisms such as precipitation, surface complexation, ion exchange, cation–π interactions, and electrostatic attraction. Further, biochar production and modification promote good adsorption capacity for dye removal owing to the properties tailored from the production stage and linked with specific adsorption mechanisms such as hydrophobic and electrostatic interactions. Meanwhile, a framework for artificial neural networking and machine learning to model the dye removal efficiency of biochar from wastewater is proposed even though such studies are still in their infancy stage. The present review article recommends that smart technologies for modelling and forecasting the potential of such modification of biochar should be included for their proper applications.

Recent advances in biochar technology for textile dyes wastewater remediation: A review

With the continuous rise of industrialization and agriculture, the concentration of organic contaminants such as dyes in the ecosystem has increased in subsequent years, causing major environmental contamination. Adsorption has been revealed to be a reliable and cost-effective way of eliminating organic pollutants. Biochar technology has the potential of converting trash into treasure when utilized for environmental remediation since it has numerous benefits such as the availability of diverse types of raw materials, low cost, and reusability. The potential of biochar as an adsorbent, support for catalysis, and a composite catalyst for dye degradation and mineralization is summarized in this research. It discusses its current research status in the adsorption and degradation of various dyes, incorporates the pertinent adsorption variables, encapsulates its regeneration techniques, investigates its engineering applications, and finally analyses limitations and discusses future development prospects.

Peracetic Acid Activated with Electro-Fe2+ Process for Dye Removal in Water

An electro-Fe2+-activated peracetic acid (EC/Fe2+/PAA) process was established for organic dye removal in water. The operation factors such as the PAA dosage, Fe2+ amount, current density, and pH were investigated on methylene blue (MB) removal for the synergistic EC/Fe2+/PAA system. Efficient MB decolorization (98.97% and 0.06992 min−1) was achieved within 30 min under 5.4 mmol L−1 PAA, 30 μmol L−1 Fe2+, 15 mA cm−2 current intensity, and pH 2.9. Masking tests affirmed that the dominating radicals were hydroxyl radicals (OH), organic radicals (CH3CO2·, CH3CO3·), and singlet oxygen (1O2), which were generated from the activated PAA by the synergetic effect of EC and Fe2+. The influence of inorganic ions and natural organic matter on the MB removal was determined. Moreover, the efficacy of the EC/Fe2+/PAA was confirmed by decontaminating other organic pollutants, such as antibiotic tetracycline and metronidazole. The studied synergy process offers a novel, advanced oxidation method for PAA activation and organic wastewater treatment.

Application of Biochar as Functional Material for Remediation of Organic Pollutants in Water: An Overview

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

Cu-Doped magnetic loofah biochar for tetracycline degradation via peroxymonosulfate activation

The Cu-doped deactivated magnetic biochar exhibited high PMS activation to degrade TC with a high removal rate of 97.6%.