Efficient trap of polar aromatic amines in environmental waters by electroenhanced solid phase microextraction based on porous monolith doped with carboxylic carbon nanotubes

Thiocarbamide conversion-based nitrogen-rich covalent organic framework coatings for electro-enhanced solid-phase microextraction of bisphenols

Design and preparation of fiber coatings with excellent electrochemical performance and high polarity is significant for efficient extraction of polar targets in electro-enhanced solid-phase microextraction (EE-SPME). In this work, a combination strategy for structure regulation of covalent organic framework (COF) was proposed to fabricate a nitrogen-rich thiocarbamide linked COF coating (Thiocarbamide-TZ-DHTP) via molecular design and post-synthetic thiocarbamide conversion. The prepared COF coating possesses a large number of O, N, and S functional groups, which not only endow the coating with higher polarity but also significantly enhance its electrochemical performance. The COF coating was used for EE-SPME of polar bisphenols (BPs), demonstrating excellent enrichment efficiency and durability. Subsequently, coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS), a sensitive method was developed for determination of trace BPs. The established method possess wide linear ranges (2.0-800.0 ng L-1), good correlation coefficients (0.9985-0.9994) and low detection limits (0.1-2.0 ng L-1). Moreover, the established method had been successfully applied to detection of trace BPs in tea beverage with satisfactory recoveries (81.6 % to 118.6 %). This research provides a feasible pathway for preparing COF coating with excellent electrochemical performance and high polarity for EE-SPME.

Tracking Aromatic Amines from Sources to Surface Waters

This review examines the environmental occurrence and fate of aromatic amines (AAs), a group of environmental contaminants with possible carcinogenic and mutagenic effects. AAs are known to be partially responsible for the genotoxic traits of industrial wastewater (WW), and AA antioxidants are acutely toxic to some aquatic organisms. Still, there are gaps in the available data on sources, occurrence, transport, and fate in domestic WW and indoor environments, which complicate the prevention of adverse effects in aquatic ecosystems. We review key domestic sources of these compounds, including cigarette smoke and grilled protein-rich foods, and their presence indoors and in aquatic matrices. This provides a basis to evaluate the importance of nonindustrial sources to the overall environmental burden of AAs. Appropriate sampling techniques for AAs are described, including copper-phthalocyanine trisulfonate materials, XAD resins in solid-phase extraction, and solid-phase microextraction methods, which can offer insights into AA sources, transport, and fate. Further discussion is provided on potential progress in the research of AAs and their behavior in an aim to support the development of a more comprehensive understanding of their effects and potential environmental risks.

Colorimetric sensor array for versatile detection and discrimination of model analytes with environmental relevance

In the current work, a rapid, simple, low-cost, and sensitive smartphone-based colorimetric sensor array coupled with pattern-recognition methods was proposed for the determination and differentiation of some organic and inorganic bases (i.e., OH-, CO32-, PO43-, NH3, ClO-, diethanolamine, triethanolamine) as model compounds. The sensing system has been designed based on color-sensitive dyes (Fuchsine, Giemsa, Thionine, and CoCl2) which were used as sensor elements. The color changes of a sensor array were observed by the naked eye. The color patterns were recorded using digital imaging in a three-dimensional (red, green, and blue) space and quantitatively analyzed with color calibration techniques. Distinctive colorimetric patterns for target bases via linear discriminant analysis (LDA) and hierarchical clustering analysis (HCA) were observed. The results indicated that the analytes related to each class (at the different concentration levels in the range of 0.001-1.0 mol L-1) were clustered together in the canonical discriminant plot and HCA dendrogram with high sensitivity and an overall precision of 85%. Furthermore, the first function factor of LDA correlated with the concentration of each target analyte in a correlation coefficient (R2) range of 0.864-0.996. These described procedures based on the colorimetric sensor array technique could be a promising candidate for practical applications in package technology and facile detection of pollutants.

Synthesis of stable and efficient amide-based covalent organic frameworks fiber coatings for the improved solid-phase microextraction of polar aromatic amines

BACKGROUND

Developing facile and general functionalization strategies to improve the durability of covalent organic framework (COF) coatings and their affinity for polar targets is of great significance for solid-phase microextraction (SPME) technology.

RESULTS

In this work, a facile and general amidation strategy was developed for conversion from reversible (imine) to irreversible (amide) linkages in COF coatings. After the amidation, the durability of the obtained amide-linked covalent organic framework (Am-P-COF) coating was greatly improved, and the adsorption efficiency for polar aromatic amines (AAs) was also significantly increased. Moreover, this strategy is also applicable to the amidation of other two COF coatings, showing good general applicability. The obtained Am-P-COF coated fiber was used for SPME, and then coupled with gas chromatography tandem mass spectrometry (GC-MS/MS) to detect AAs. Under the optimal SPME conditions (extraction temperature: 50 °C, extraction time: 30 min, stirring rate: 600 rpm, pH: 8, NaCl concentration: 5.0 mg mL-1, desorption temperature: 290 °C and desorption time: 10 min), a detection method for trace AAs was established. The established method possess wide linear ranges (0.5-500.0 ng L-1), good correlation coefficients (0.9986-0.9993) and low detection limits (0.1-0.5 ng L-1). Moreover, the established method had also been successfully applied to detection of trace AAs in bottled tea beverage and plastic bags packed tea with satisfactory recoveries (83.5 %-116.8 %).

SIGNIFICANCE AND NOVELTY

This research provides a facile and general pathway for increasing the durability of COF coatings and affinity to the polar AAs. The detection method based on the obtained fibers possesses high sensitivity, satisfactory reproducibility and good precision.

In situ formation of chloroform for dispersive liquid-liquid microextraction of some aromatic amines from aqueous samples optimized by central composite design prior to GC-MS analysis

In the current research, an in situ solvent formation-liquid phase microextraction method based on chloroform has been introduced as an efficient sample preparation procedure and applied for the extraction and preconcentration of some aromatic amines from wastewaters. In this method, chloral hydrate (2,2,2-trichloroethane-1,1-diol) was added to an alkaline solution of the samples in order to form chloroform as an extraction solvent in the sample solution. Thus, the selected analytes were transferred from the aqueous solution into the tiny droplets of the produced chloroform. Following this, the extracted and enriched analytes were quantified using a gas chromatograph-mass spectrometer. Experimental conditions of the proposed method including the chloral hydrate amount, salt effect, extraction time, and sodium hydroxide concentration were studied and optimized by a central composite design approach. By the offered method, high enrichment factors (292-324) with satisfactory extraction recoveries (82-91%), low limits of detection (0.26-0.39 ng mL^-1), and proper repeatability (relative standard deviations ≤6.3% for intra- and inter-day precisions) were achieved under optimum conditions. Eventually, the suggested method was assessed through the quantification of aromatic amines in aqueous samples.

Effective and selective measurement of 2,4-dinitroaniline utilizing constructed fluorescent carbon dots sensor derived from vitamin B1

2,4-Dinitroaniline is a multifunctional product and has been applicated in various fields. It has absorbed much concerns due to its large consumption and occurrence in many environmental matrices. It is urgent to explore reliable and sensitive measurement technology. Present study described an outstanding fluorescence sensor constructed with carbon dots (CDs) derived from vitamin B₁. The CDs were fabricated by dealing with a facile hydrothermal process, and exhibited good water solubility, fluorescence stability and highly fluorescence quenching characteristics in presence of 2,4-dinitroaniline. The excitation and emission wavelengths of the obtained CDs were 305 and 378 nm, respectively. The sensor displayed good selectivity and sensitivity for 2,4-dinitroaniline. Good linearity can be achieved in two-stage of 0.2-3 μmol L^-1 and 3-20 μmol L^-1. The sensor earned low detection limit for 2,4-dinitroaniline down to 0.05 μmol L^-1. The sensor has been commendably employed for analysis of 2,4-dinitroaniline in real aqueous samples with spiked recoveries in the range of 95.0-99.6%. The proposed sensor provided a promising alternative for analysis of environmental pollutants or other meaningful employment.

Electrokinetic Extraction of Doxorubicin from Biological Fluids by Polymer Inclusion Membrane Sampling Probe

A polymer inclusion membrane (PIM) based sampling probe was developed for electrokinetic extraction of drugs from biological fluids. The probe was fabricated by dip-coating a nonconductive glass capillary tube in a homogeneous PIM solution for three cycles. The PIM solution comprised cellulose triacetate (CTA), 2-nitrophenyl octyl ether (NPOE), and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [EMIM][NTf₂] in a ratio of 5:4:2. The developed probe electrokinetically extracted doxorubicin from human plasma, human serum, and dried blood spot (DBS). The practicability and reliability of the electrokinetic extraction were evaluated by LC-MS/MS to quantify the desorption of extracted doxorubicin. Under the optimized conditions, a quantification limit of 0.2-2 ng/mL was achieved for the three biological samples. The probe was further integrated into a portable battery-powered device for safe low-voltage (36 V) electrokinetic extraction. The developed technique is envisioned to provide a more efficient analytical workflow in the laboratory.

Biodegradable and Electrically Conductive Melanin-Poly (3-Hydroxybutyrate) 3D Fibrous Scaffolds for Neural Tissue Engineering Applications

Due to the severity of peripheral nerve injuries (PNI) and spinal cord injuries (SCI), treatment options for patients are limited. In this context, biomaterials designed to promote regeneration and reinstate the lost function are being explored. Such biomaterials should be able to mimic the biological, chemical, and physical cues of the extracellular matrix for maximum effectiveness as therapeutic agents. Development of biomaterials with desirable physical, chemical, and electrical properties, however, has proven challenging. Here a novel biomaterial formulation achieved by blending the pigment melanin and the natural polymer Poly-3-hydroxybutyrate (PHB) is proposed. Physio-chemical measurements of electrospun fibers reveal a feature rich surface nano-topography, a semiconducting-nature, and brain-tissue-like poroviscoelastic properties. Resulting fibers improve cell adhesion and growth of mouse sensory and motor neurons, without any observable toxicity. Further, the presence of polar functional groups positively affect the kinetics of fibers degradation at a pH (≈7.4) comparable to that of body fluids. Thus, melanin-PHB blended scaffolds are found to be physio-chemically, electrically, and biologically compatible with neural tissues and could be used as a regenerative modality for neural tissue injuries. A biomaterial for scaffolds intended to promote regeneration of nerve tissue after injury is developed. This biomaterial, obtained by mixing the pigment melanin and the natural polymer PHB, is biodegradable, electrically conductive, and beneficial to the growth of motor and sensory neurons. Thus, it is believed that this biomaterial can be used in the context of healthcare applications.

Analytical perspective and environmental remediation potentials of magnetic composite nanosorbents

The synthesis and application of magnetic nanosorbents to remove emerging pollutants have been considered the best environmental remediation and sustainability option. Incorporating magnetism shortens the treatment time and allows the sorbent to be recovered quickly using external magnetic with many cycles. The implementation of magnetic solid-phase extraction (MSPE) using magnetic materials of different shapes, sizes, and surface morphology can be a valuable tool in applying materials to prepare analytical samples. In MSPE applications, materials with strong magnetic domain can be used as precursors for constructing magnetic composite as a promising sorbent. This article focuses on the most recent and exceptional applications of magnetic adsorbents for preconcentration and removal purposes. Magnetic adsorbents, such as nanoparticles (NPs), foam, sponges, nanocomposites, hydrogels, and beads with multifunctional attributes have been comprehensively studied in terms of preparation procedures, limitations, advantages, and interactions between pollutants and magnetic composites. The role of magnetic sorbents in sample preparation methods, such as simple solid-phase extraction and microextraction, as well as sorptive extraction using a stir bar, was also examined. The use of magnetic adsorbents with analytical techniques, such as solid-phase extraction and solid-phase microextraction improves the method for preparing samples concerning the influential role of magnetic adsorbents. Towards the end, promising features and future outlook are also directed.