Recent advances on silver-based photocatalysis: Photocorrosion inhibition, visible-light responsivity enhancement, and charges separation acceleration

Synthesis of a novel bismuth molybdite/iron oxide thin film for oxytetracycline degradation in a photoelectrocatalytic system

In this study, heterostructures based on Bismuth molybdite/iron oxide (Bi2MoO6/Fe2O3) thin films were fabricated by a dip-coating technique using precursor solutions. The heterostructures were deposited on fluorine-doped tin oxide glass substrates. From a detailed characterization using X-ray diffraction and X-ray photoelectron spectroscopy, the formation of the orthorhombic phase for Bi2MoO6 and the co-existence of hematite and maghemite in Fe2O3 was demonstrated. Meanwhile, the field emission scanning electron microscopy cross-section images confirm the formation of well-defined Bi2MoO6 film under the Fe2O3 deposition. The optical band gap energies for the heterostructure obtained were estimated from the diffuse reflectance spectra and ranged from 2.3 to 3.5 eV. Photoluminescence analysis revealed an improved separation and faster transfer of photogenerated electrons and holes for the Bi2MoO6/Fe2O3 (Het) film. The best oxytetracycline (OTC) removal percentage through photoelectrocatalytic treatment was 96.85% using the Het. Besides, were carried out the variation of parameters which affect the OTC photoelectrocatalytic degradation as pH, potential applied, and scavenger assay. The 1O2 was the oxidant predominate, which attack the OTC ring to initiate and accelerate the degradation process. Based on the analysis of degradation intermediates and characteristics of Bi2MoO6/Fe2O3, possible degradation pathways and mechanisms of OTC were displayed. An enhancement of oxytetracycline degradation efficiency of Het fabricated compared to pristine oxides was achieved mainly due to avoid the charge recombination of photogenerated electron-hole pairs provided by Direct Z-scheme heterostructure. Finally, the Het fabricated represents a promising material for efficient and sustainable pharmaceutical removal applications.

Effect of pore structure in bismuth metal-organic framework nanorod derivatives on adsorption and organic pollutant degradation

This study explores the synthesis, characterization, and photocatalytic properties of bismuth metal-organic framework (Bi-MOF) nanorods and their derivatives such as Ag/Bi-MOF and Ag/Bi2O3. Bi-MOF nanorods exhibit significant photocatalytic activity under visible light, with the addition of silver (Ag) enhancing electron-hole pair separation and reducing their recombination. This leads to improved photocatalytic performance, particularly in the degradation of organic pollutants such as Rhodamine B (RhB) and Methylene Blue (MB). The results show that Bi-MOF and its derivatives demonstrate excellent chemical stability and high performance in photocatalytic applications, even when subjected to high temperatures and tested across a wide pH range. The large surface area and microporous structure facilitate selective adsorption of small organic molecules like MB. The pores and large surface area not only provide numerous active sites but also enhance the interaction between reactants and the catalyst surface, improving photocatalytic efficiency. Bi-MOF and its derivatives perform optimally across a broad pH range, from acidic to alkaline environments, where strong oxidizing hydroxyl radicals (·OH) are easily formed, aiding in the effective degradation of organic compounds. The study also shows that Bi-MOF and its derivatives can be reused multiple times without significant loss in performance. This research contributes to the development of advanced materials for environmental remediation, highlighting the potential of Bi-MOF-based nanocomposites in practical applications.

New insight into highly efficient CSA@g-C3N4 for photocatalytic oxidation of benzyl alcohol and thioanisole: NAEDS as a promoter of photoactivity under blue LED irradiation

An open new perspective has been established toward synthesizing eco-friendly CSA@g-C3N4 employing surface engineering. The carbon nitride modified through camphorsulfonic acid was designed and developed in a category of the new generation of photocatalysts for the oxidation of benzyl alcohol and thioanisole in the existence of a natural deep eutectic solvent (NADES). In comparison with pure g-C3N4, not only does CSA@g-C3N4 exhibit an extraordinarily higher ability for harvesting visible light stemming from declining the recombination rate of electrons/holes dependent on PL results but it also reveals notable photocatalytic oxidation capability in the transformation of alcohols as well as thiols into relevant compounds. In addition, non-metal compound (CSA) incorporation would result in considerably diminishing the energy band gap value from 2.8 to 2.28 eV to escalate the visible-light absorption of g-C3N4. While the conventional consensus implies that inherent properties of photocatalysts bring on high photoactivity, this study indicates that deploying choline chloride-urea deep eutectic solvent as an external factor plays the role of photoactivity accelerator. Furthermore, readily recycling and reusability can be achieved for the photocatalytic setup of CSA@g-C3N4 ascribed to its heterogeneous nature with no drop in the photoactivity.

Ag-based coordination polymer-enhanced photocatalytic degradation of ciprofloxacin and nitrophenol

Transition-metal coordination complexes have attracted wide attention in molecular chemistry, but their applications still confront a tremendous challenge. Herein, a novel silver coordination polymer with a formula of {[Ag9(TIPA)6](NO3)9·12H2O}n (Ag-TIPA) was prepared by a solvothermal reaction of silver nitrate with triangular tris(4-imidazolylphenyl)amine (TIPA). The crystalline molecular structure was determined by single-crystal X-ray diffraction, which showed that each Ag(I) was coordinated with two nitrogen atoms of TIPA ligands. Such Ag-TIPA was used as a catalyst for the photodegradation of ciprofloxacin and 4-nitrophenol under UV-visible light irradiation. The results exhibited excellent photocatalytic performance and reusability due to high structure stability in an acidic, neutral and alkaline environment. The experimental findings and density functional theory calculations revealed that metal-ligand charge transfer in Ag-TIPA extended the absorption range of light and improved the charge transfer properties of TIPA. To further understand the photodegradation process, the intermediates were predicted and analysed through electrostatic potential, orbital weighted dual descriptor, and liquid chromatography-mass spectrometry techniques. Based on these findings, a possible degradation mechanism was proposed. This study provides new insights into the design and synthesis of Ag-based coordination polymers with novel structures, excellent catalytic activity, and good durability.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

A floating photocatalytic fabric integrated with a AgI/UiO-66-NH2 heterojunction as a facile strategy for wastewater treatment

With an increased need of wastewater treatment, application of photocatalysts has drawn growing research attention as an advanced water remediation strategy. Herein, a floating photocatalytic fabric in a woven construction was developed for removal of Rhodamine B (RhB) in water. For an efficient photocatalytic reaction, AgI nanoparticles were grown on the surface of UiO-66-NH2 crystals in a layered structure, forming a heterojunction system on a cotton yarn, and this was woven with polypropylene yarn. The floating photocatalyst demonstrated the maximized light utilization and adequate contact with contaminated water. Through the heterojunction system, the electrons and holes were effectively separated to generate reactive chemical species, and this eventually led to an enhanced photocatalytic performance of AgI/UiO@fabric reaching 98% removal efficiency after 2 hours of irradiation. Photodegradation of RhB occurred mainly by superoxide radicals and holes, which were responsible for de-ethylation and decomposition of an aromatic ring, respectively. The kinetics of the photocatalytic reaction suggested that circulation of solution by stirring affected the photocatalytic removal rate. The recycle test demonstrated the potential long-term applicability of the developed material with structural integrity and catalytic stability. This study highlights the proof-of-concept of a floating photocatalytic material for facile and effective water remediation with repeated usability.

High-performance ZnIn2S4/Ni(dmgH)2 for photocatalytic hydrogen evolution: Ion exchange construction, photocorrosion mitigation, and efficiency enhancement by photochromic effect

In this work, a novel photocatalyst of ZnIn₂S₄/Ni(dmgH)₂ was designed by a simple chemical precipitation method and used to enhance hydrogen evolution under visible light irradiation. Along with vigorous discharges of hydrogen bubbles, an optimal rate of 36.3 mmol/g/h was reached under UV-Vis light for hydrogen evolution, nearly 4.9 times of the one from pure ZnIn₂S₄. The heterojunction exhibits steady hydrogen evolution capability and owns a high apparent quantum efficiency (AQE) of 20.45% under the monochromatic light at 420 nm. By coupling ZnIn₂S₄ with Ni(dmgH)₂, an extraordinary photochromic phenomenon was detected and attributed to the active Ni-S component in situ formed between the nickel and sulfur composites under light irradiation. The emerging sulfide benefits light absorption of the system and separation of photogenerated electron and hole pairs. Besides providing a promising photocatalyst for visible light hydrogen production, the present work is hoped to inspire new trends of catalytic medium designs and investigations.

Graphene oxide-incorporated silver-based photocatalysts for enhanced degradation of organic toxins: a review

Environmental contamination and scarcity of energy have been deepening over the last few decades. Heterogeneous photocatalysis plays a prominent role in environmental remediation. The failure of earlier metal oxide systems like pure TiO₂ and ZnO as stable visible-light photocatalysts demanded more stable catalysts with high photodegradation efficiency. Silver-based semiconductor materials gained popularity as visible-light-responsive photocatalysts with a narrow bandgap. But their large-scale usage in natural water bodies for organic contaminant removal is minimal. The factors like self-photocorrosion and their slight solubility in water have prevented the commercial use. Various efforts have been made to improve their photocatalytic activity. This review focuses on those studies in which silver-based semiconductor materials are integrated with carbonaceous graphene oxide (GO) and reduced graphene oxide (RGO). The decoration of Ag-based semiconductor components on graphene oxide having high-surface area results in binary composites with enhanced visible-light photocatalytic activity and stability. It is found that the introduction of new efficient materials further increases the effectiveness of the system. So binary and ternary composites of GO and Ag-based materials are reviewed in this paper.

Green Synthesis of Silver Oxide Nanoparticles for Photocatalytic Environmental Remediation and Biomedical Applications

Among the most notable nanotechnology applications is its employment in environmental remediation and biomedical applications. Nonetheless, there is a need for cleaner and sustainable methods in preparing nanomaterials that use cheaper, more environment-friendly precursors than the conventional synthesis process. The green chemistry approach for the preparation of nanoparticles is becoming more attractive as it uses non-toxic chemicals and reagents. It also offers cost-effective synthesis process as it uses readily available plant sources and microbe as redox mediators in converting metallic cations to metal or metal oxide nanoparticles. The extracts of these plants and microbe sources contain phytochemicals and metabolites in variable quantities, which serve as redox mediators and capping agents that stabilize the biosynthesized nanoparticles. The present article reviews the recent studies on the fabrication of silver oxide nanoparticles (Ag2O-NPs) via plant-mediated and microbe-mediated green synthesis, giving a concise discussion on the green preparation of Ag2O-NPs employing extracts of different plants and microbial sources. The performances of the biosynthesized Ag2O-NPs are also reviewed, highlighting their potential use in photocatalysis and biomedical applications.