Microwave-assisted synthesis of RuTe2/black TiO2 photocatalyst for enhanced diclofenac degradation: Performance, mechanistic investigation and intermediates analysis

The mechanism and reaction kinetics of visible light active bismuth oxide deposited on titanium vanadium oxide for aqueous diclofenac photocatalysis

Non-uniform, non-spherical bismuth oxide deposited on titanium vanadium oxide (3%-BVT1) was successfully synthesized via co-precipitation method and assessed for visible light degradation of aqueous diclofenac. The synthesized photocatalysts were characterized using X-ray diffraction, diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. Up to 80.7% diclofenac degradation was observed with a significant increment in reaction rate compared to commercially available Degussa P25 (kapp = 0.0013 → 0.0083 min-1) achieved within 3 h treatment time under optimized parameters of diclofenac concentration (10 mg L-1), catalyst loading (0.1 g L-1), and pH (5). The enhanced photocatalysis could be due to electron-hole separation and contribution of powerful oxidative species •OH > O2•-  > h+  >  > e-. The recyclability experiments indicate that 3%-BVT1 retained its efficiency up to 74.1% over five reaction cycles. Gas chromatography-mass spectrometry analysis indicated the formation of several transformation products during the degradation pathway. The studies of interfering ions depicted mild interference by sulfates, while interference by phosphates and nitrates was negligible during photocatalytic process, i.e., 70, 78.01, and 78.43% for the selected concentrations of 50, 25, and 40 mg L-1 as per their maximum concentrations detected in the natural wastewaters. Thus, 3%-BVT1 is a potential versatile candidate to treat various organic pollutants including pharmaceuticals.

Fabrication of multiphase MoSe2 modified BiOCl nanosheets for efficient piezo-photoelectric hydrogen evolution and antibiotic degradation

Efficient spatial charge separation plays a crucial role in improving the photocatalytic performance. Therefore, 1T/2H MoSe2/BiOCl (1T/2H MS/BOC) and 2H MoSe2/BiOCl (2H MS/BOC) piezo-photocatalysts are synthesized. By combining piezoelectric catalysis and photocatalysis, a highly active piezo-photocatalytic process is realized. The optimal 1T/2H MS/BOC piezo-photocatalyst displays superior diclofenac (DCF) degradation and hydrogen (H2) evolution activity under the combined action of ultrasound and light. In particular, the DCF degradation kinetic constant (k) of optimal 0.5% 1T/2H MS/BOC under the synergistic effect of ultrasound and light is 0.057 min-1, which is 8.1 and 6.3 times higher than those of BiOCl (0.007 min-1) and 0.5% 2H MS/BOC (0.009 min-1). Moreover, the H2 evolution rate of 0.5% 1T/2H MS/BOC is 122.5 μmol g-1 h-1, which is also higher than those of BiOCl (45.8 μmol g-1 h-1) and 2H MS/BOC (49.5 μmol g-1 h-1). The dramatic improvement in the DCF degradation and H2 evolution piezo-photocatalytic performance of 1T/2H MS/BOC catalysts is ascribed to the built-in polarization electric field and abundance of active sites of 1T/2H MS/BOC as well as the advantageous band structure between BiOCl and 1T/2H MoSe2. Additionally, three probable degradation pathways of DCF were put forward from the results of liquid chromatography-mass spectrometry (LCMS) and density functional theory (DFT) calculations. This study provides the design strategy of high efficiency piezo-photocatalysts in environmental purification and energy-generation fields based on phase and band structure engineering.

Recent Advances in Black TiO2 Nanomaterials for Solar Energy Conversion

Titanium dioxide (TiO₂) nanomaterials have been widely used in photocatalytic energy conversion and environmental remediation due to their advantages of low cost, chemical stability, and relatively high photo-activity. However, applications of TiO₂ have been restricted in the ultraviolet range because of the wide band gap. Broadening the light absorption of TiO₂ nanomaterials is an efficient way to improve the photocatalytic activity. Thus, black TiO₂ with extended light response range in the visible light and even near infrared light has been extensively exploited as efficient photocatalysts in the last decade. This review represents an attempt to conclude the recent developments in black TiO₂ nanomaterials synthesized by modified treatment, which presented different structure, morphological features, reduced band gap, and enhanced solar energy harvesting efficiency. Special emphasis has been given to the newly developed synthetic methods, porous black TiO₂, and the approaches for further improving the photocatalytic activity of black TiO₂. Various black TiO₂, doped black TiO₂, metal-loaded black TiO₂ and black TiO₂ heterojunction photocatalysts, and their photocatalytic applications and mechanisms in the field of energy and environment are summarized in this review, to provide useful insights and new ideas in the related field.