Masking covalent organic frameworks (COFs) with loose polyamide networks for precise nanofiltration

Fabrication of polyamide nanofiltration membrane with tannic acid/poly(sodium 4-styrenesulfonate) network-like interlayer for enhanced desalination performance

The traditional polyamide composite nanofiltration membranes have high selectivity and low water permeance, so it is necessary to find strategies to raise the permeance. Herein, a novel polyamide nanofiltration membranes with high permeance were fabricated by coating a loose hydrophilic network-like interlayer, where tannic acid (TA) with pentapophenol arm structure binds to poly(4-styrenesulfonate) (PSS) polymer through hydrogen and ionic interactions. The effects of the network-like TA/PSS interlayer on surface morphology, surface hydrophobicity, and the interfacial polymerization mechanism were investigated. The outcomes demonstrated that the TA/PSS interlayer can offer a favorable environment for interfacial polymerization, enhance the hydrophilicity of the substrate membrane, and delay the release of piperazine (PIP). The optimized TFC-2 presents pure water flux of 22.7 ± 2.8 L m-2 h-1 bar-1, Na2SO4 rejection of 97.1 ± 0.5 %, and PA layer thickness of about 38.9 ± 2.5 nm. This provides new strategies for seeking to prepare simple interlayers to obtain high-performance nanofiltration membranes.

Covalent Organic Framework-derived Composite Membranes for Water Treatment

Water treatment has experienced a surge in the adoption of membrane separation technology. Covalent organic frameworks (COFs), a class of metal-free and open-framework materials, have emerged as potential membrane materials owing to their interconnected periodic porosity, tunability, and chemical stability. However, the challenges associated with processing COF powders into self-standing membranes have spurred the emergence of COF composite membranes. This review article highlights the rationale behind developing COF composite membranes and their categories, including mixed matrix membranes (MMMs) and thin film composite (TFC) membranes. The common fabrication techniques of each category are presented. In addition, the influence of COF additives on the performance of the resultant composite membranes is systematically discussed, with a focus on the recent progress in applying COF composite membranes in the separation of different categories of water pollutants, including organic ions/molecules, toxic solvents, proteins, toxic heavy metals, and radionuclides.

Applications of covalent organic frameworks for the elimination of dyes from wastewater: A state-of-the-arts review

Covalent organic frameworks (COFs) are class of porous coordination polymers made up of organic building blocks joined together by covalent bonding through thermodynamic and controlled reversible polymerization reactions. This review discussed versatile applications of COFs for remediation of wastewater containing dyes, emphasizing the advantages of both pristine and modified materials in adsorption, membrane separation, and advanced oxidations processes. The excellent performance of COFs towards adsorption and membrane filtration has been centered to their higher crystallinity and porosity, exhibiting exceptionally high surface area, pore size and pore volumes. Thus, they provide more active sites for trapping the dye molecules. On one hand, the photocatalytic performance of the COFs was attributed to their semiconducting properties, and when coupled with other functional semiconducting materials, they achieve good mechanical and thermal stabilities, positive light response, and narrow band gap, a typical characteristic of excellent photocatalysts. As such, COFs and their composites have demonstrated excellent potentialities for the elimination of the dyes.

Enhancing bioelectrochemical performance of two-dimensional material attached by covalent/metal organic frameworks as cathode catalyst for microbial fuel cells

In this study, covalent/metal organic framework and two-dimensional material (COF-300/ZIF-8@Ti₃AlC₂) were composited by a three-step distributed feed method for cathode catalyst in microbial fuel cells (MFCs). The growth of irregular cube-like COF-300/ZIF-8 on the Ti₃AlC₂ substrate was observed. Al, Zn, Ti, N, C and O elements were observed uniformly and more active sites were offered through it. The external output voltage of COF-300/ZIF-8@Ti₃AlC₂-MFC was 576 mV and this could be almost unchanged for 9 days. The external output power density was 587.01 mW/m², and that was 1.25 times of COF-300@Ti₃AlC₂-MFC (469.30 mW/m²) and 1.67 times of COF-300/ZIF-8-MFC (352.09 mW/m²). Ti₃AlC₂ enhanced the electrical conductivity of the composite by its rich surface functional groups and much more surface active sites. COF-300/ZIF-8 mixture improved the instability and disorder of the monomer. This study would supply technical support for the expanded request of composite materials in microbial electrochemistry.

Recent Development in Laminar Transition Metal Dichalcogenides-based Membranes Towards Water Desalination: A Review

Transition metal dichalcogenides (TMDCs)-based laminar membranes have gained significant interest in energy storage, fuel cell, gas separation, wastewater treatment, and desalination applications due to single layer structure, good functionality, high mechanical strength, and chemical resistivity. Herein, we review the recent efforts and development on TMDCs-based laminar membranes, and focus is given on their fabrication strategies. Further, TMDCs-based laminar membranes for water purification and seawater desalination are discussed in detail. Finally, present their merits, limits and future challenges needed in this area.

Accelerating the Fe(III)/Fe(II) cycle via enhanced electronic effect in NH2-MIL-88B(Fe)/TPB-DMTP-COF composite for boosting photo-Fenton degradation of sulfamerazine

In the photo-Fenton reactions, fast recombination of photoinduced electrons and holes in Fe-based metal-organic frameworks (Fe-MOFs) slows Fe(III)/Fe(II) cycle, which remains big challenge that significantly retards the overall process. Herein, NH₂-MIL-88B(Fe) (NM88) was modified with 3,5-diaminobenzoic acid (DB) and TPB-DMTP-COF (COF-OMe) to in situ construct NM88(DB)_0.85/COF-OMe composite that could strongly harvest the visible light for photo-Fenton degradation of sulfamerazine (SMR). With the addition of DB, electron-donating effect of NM88 was strengthened, which then promoted amino groups to react with aldehyde groups (Schiff-base), and thus highly facilitated the interfacial contact between NM88 and COF-OMe. Such modifications increased the degradation rate constants for NM88(DB)_0.85/COF-OMe to 15.1 and 17.3 times that of NM88 and COF-OMe respectively with good reusability. Moreover, the catalyst exhibited 32-170 times higher degradation kinetics in comparison to other reported catalysts. Results showed that due to the Schiff-base reaction between NM88(DB) and COF-OMe, electron density on Fe(III) was decreased; and the photogenerated electrons of COF-OMe moved to NM88(DB) to reduce Fe(III), thus resulting in the generation of highly active Fe(II) and ·OH species. Furthermore, the main reactive species were determined to be ·OH and ·O₂^- by trapping experiments, and a possible mechanism of the degradation system followed Z-scheme charge transfer.