Investigation the adsorption behavior of functional carbon-based composites for efficient removing anions / cations in single and multicomponent systems

Biopolymer Hydrogel-Based Salt-Resistant Evaporator for Solar-Energy-Driven Desalination and Water Purification

Interfacial solar steam generation (ISSG) has recently received much attention as a low-carbon-footprint and high-energy-efficient strategy for seawater desalination and wastewater treatment. However, achieving the goals of a high evaporation rate, ecofriendliness, and high tolerance to salt ions in brine remains a bottleneck. Herein, a novel hydrogel-based evaporator for effective solar desalination was synthesized on the basis of sodium alginate (SA) and carboxymethyl chitosan (CMCS) incorporating a carbon nanotube (CNT)-wrapped melamine sponge (MS) through a simple dipping-drying-cross-linking process. The hydrogel-based evaporator reaches a high evaporation rate of 2.18 kg m-2 h-1 in 3.5 wt % brine under 1 sun irradiation. Furthermore, it demonstrated excellent salt ion rejection in high-concentration salt water. Simultaneously, it exhibits excellent purification functionality toward heavy metals and organic dyes. This study provides a simple and efficient strategy for seawater desalination and wastewater treatment.

Adsorption of cationic/anionic dyes and endocrine disruptors by yeast/cyclodextrin polymer composites

Factory and natural wastewaters contain a wide range of organic pollutants. Therefore, multifunctional adsorbents must be developed that can purify wastewater. Phytic acid-cross-linked Baker's yeast cyclodextrin polymer composites (IBY-PA-CDP) were prepared using a one-pot method. IBY-PA-CDP was used to adsorb methylene blue (MB), bisphenol A (BPA), and methyl orange (MO). Studies on the ionic strength and strongly acidic ion salts confirmed that IBY-PA-CDP adsorbs MO through hydrophobic interactions. This also shows that Na+ was the direct cause of the increased MO removal. Adsorption studies on binary systems showed that MB/MO inhibited the adsorption of BPA by IBY-PA-CDP. The presence of MB increased the removal rate of MO by IBY-PA-CDP due to the bridging effect. The Langmuir isotherm model calculated the maximum adsorption capacities for MB and BPA to be 630.96 and 83.31 mg g-1, respectively. However, the Freundlich model is more suitable for fitting the experimental data for MO adsorption. To understand the rate-limiting stage of adsorption, a mass-transfer mechanism model was employed. The fitting results show that adsorption onto the active sites is the rate-determining step. After five regeneration cycles, IBY-PA-CDP could be reused with good stability and recyclability.

Nanocellulose-based polyurethane foam adsorbent for pressure-driven dye-contaminated water purification

Dye-contaminated water has caused a worldwide pollution, which is threatening aquatic organisms and human health. In this work, a pressure-driven foam adsorbent (PFA) was bioinspired from the tapestry turban for purifying the dye-contaminated water. The PFA was prepared using an one-step method from nanocellulose (NC), amino-functionalized ZIF-8 (ZIF-8-NH2), and high resilience polyurethane foam (PUF). It was applied to efficiently remove methyl orange (MO) and crystal violet (CV) dyes from dye-contaminated waste solutions. The maximum adsorption capacity of PFA for MO and CV was 225.9 mg/g (25 °C, pH = 2) and 41.6 mg/g (25 °C, pH = 10), respectively, which were acceptable as compared with the reported works. The dyes could be efficiently removed from various river water samples. After 5 cycles, the removal efficiencies of MO and CV decreased from 92.0% and 85.7% to 84.7% and 76.1%, respectively. Moreover, the PFA relied on pressure-driven force to release the purified water under a low pressure.

Efficient adsorption of Congo red by micro/nano MIL-88A (Fe, Al, Fe-Al)/chitosan composite sponge: Preparation, characterization, and adsorption mechanism

MIL-88A crystals with three different metal ligands (Fe, Al, FeAl) were prepared by hydrothermal method for the first time. The three materials' crystal structure and surface morphology are different, leading to different adsorption properties of Congo red (CR). The maximum adsorption capacities of MIL-88A (Fe), MIL-88A (FeAl), and MIL-88A (Al) are 607.7 mg · g^-1, 536.4 mg · g^-1, and 512.1 mg · g^-1 respectively. In addition, MIL-88A was combined with chitosan (CS) respectively, and MIL-88A/CS composite sponge was prepared by the freeze-drying method, which not only solved the defect that MIL-88A powder was difficult to recover but also further improved the removal ability of CR by the adsorbent. The maximum adsorption capacities of MIL-88A (FeAl)/CS, MIL-88A (Fe)/CS, MIL-88A (Al)/CS, and CS are 1312 mg · g^-1, 1056 mg · g^-1, 996.7 mg · g^-1, and 769.6 mg · g^-1, respectively. The structure and physicochemical properties of the materials were analyzed by SEM, FTIR, XRD, TGA, BET, and Zeta. The adsorption process of CR follows pseudo-second-order kinetics and Langmuir, Sips isotherm model. Combined with thermodynamic parameters, the adsorption behavior was described as endothermic monomolecular chemical adsorption. The removal of CR is attributed to electrostatic interactions, hydrogen bonding, metal coordination effects, and size-matching effects.

The novel chitosan-amphoteric starch dual flocculants for enhanced removal of Microcystis aeruginosa and algal organic matter

A novel flocculation strategy for simultaneously removing Microcystis aeruginosa and algal organic matter (AOM) was proposed using chitosan-amphoteric starch (C-A) dual flocculants in an efficient, cost-effective and ecologically friendly way, providing new insights for harmful algal blooms (HABs) control. A dual-functional starch-based flocculant, amphoteric starch (AS) with high anion degree of substitution (DS_A) and cation degree of substitution (DS_C), was prepared using a cationic moiety of 3-chloro-2-hydroxypropyltrimethylammonium chloride (CTA) coupled with an anion moiety of chloroacetic acid onto the backbone of starch simultaneously. In combination of the results of FTIR, XPS, ¹H NMR, ¹³C NMR, GPC, EA, TGA and SEM, it was evidenced that the successfully synthesized AS with excellent structural characteristics contributed to the enhanced flocculation of M. aeruginosa. Furthermore, the novel C-A dual flocculants could achieve not only the removal of >99.3 % of M. aeruginosa, but also the efficacious flocculation of algal organic matter (AOM) at optimal concentration of (0.8:24) mg/L, within a wide pH range of 3-11. The analysis of zeta potential and cellular morphology revealed that the dual effects of both enhanced charge neutralization and notable netting-bridging played a vital role in efficient M. aeruginosa removal.

Removal of Hg2+ in wastewater by grafting nitrogen/sulfur-containing molecule onto Uio-66-NH2: from synthesis to adsorption studies

The remediation of heavy metal deserves to be on the agenda, with the adsorbent design bearing the brunt of it. In this study, the molecule (4, 6-diamino-2-mercaptopyrimidine, DMP) containing thiol (-SH) and amino (-NH₂) functional groups was grafted onto Uio-66-NH₂, and a composite metal-organic framework nanomaterial (Zr(NH₂)-DMP) was synthesized via a facile post-modification scheme. The morphological characteristics and structural features of the modified adsorbent were characterized by XRD, FT-IR, FE-SEM, EDS, BET, and XPS. The characterization results verified that the post-modification scheme was successfully achieved. The adsorption experiments were carried out to investigate the removal performance of the Zr(NH₂)-DMP towards Hg²⁺ under different influencing parameters. The maximum adsorption capacity of 389.4 mg/g was obtained, and the adsorption equilibrium was achieved within 30 min at pH 6 at room temperature. Adsorption thermodynamic study indicated that the adsorption process was exothermic and spontaneous. The Zr(NH₂)-DMP exhibited excellent selectivity for Hg²⁺, and also has the potential to remove Cu²⁺, Fe²⁺, and Zn²⁺ ions. The introduction of Cl^- inhibited the removal of Hg²⁺ due to the formation of mercuric chlorides (removal efficiency reduced from 97.8 to 95.6%). The removal efficiency of up to 86.7% was obtained after four cycles. The Langmuir isotherm and Pseudo-second kinetic were more suitable for fitting the adsorption process of Hg²⁺ by Zr(NH₂)-DMP. The main removal mechanism could be attributed to the chelation between Hg²⁺ (soft acid) and nitrogen/sulfur (soft base) elements. These findings convinced that the successful synthesis of Zr(NH₂)-DMP provides an option for Hg²⁺ removal from wastewater.

Investigation the adsorption behavior of functional biochar-based porous composite for efficient removing Cu(Ⅱ) in aqueous solution

Biochar was modified by acylation reaction using EDTA. Then, a novel biochar-based porous composite was prepared successfully using modified biochar as base to remove Cu(Ⅱ) in wastewater. In addition, functional...