Superhydrophilic photocatalytic g-C3N4/SiO2 composite membranes for effective separation of oil-in-water emulsion and bacteria removal

In Situ Preparation of Star-Shaped Protein-"Smart" Polymer Conjugates with pH and Thermo-Dual Responsibility for Bacterial Separation

To achieve effective separation and enrichment of bacteria, a novel synthetic scheme was developed to synthesize star-style boronate-functionalized copolymers with excellent hydrophilicity and temperature and pH responsiveness. A hydrophilic copolymer brush was synthesized by combining surface-initiated atom-transfer radical polymerization with amide reaction using bovine serum albumin as the core. The copolymer brush was further modified by introducing and immobilizing fluorophenylboronic acids through an amide reaction, resulting in the formation of boronate affinity material BSA@poly(NIPAm-co-AGE)@DFFPBA. The morphology and organic content of BSA@poly(NIPAm-co-AGE)@DFFPBA were systematically characterized. The BSA-derived composites demonstrated a strong binding capacity to both Gram-positive and Gram-negative bacteria. The binding capabilities of the affinity composite to Staphylococcus aureus and Salmonella spp. were 195.8 × 1010 CFU/g and 79.2 × 1010 CFU/g, respectively, which indicates that the novel composite exhibits a high binding capability to bacteria and shows a particularly more significant binding capacity toward Gram-positive bacteria. The bacterial binding of BSA@poly(NIPAm-co-AGE)@DFFPBA can be effectively altered by adjusting the pH and temperature. This study demonstrated that the star-shaped affinity composite had the potential to serve as an affinity material for the rapid separation and enrichment of bacteria in complex samples.

Activated carbon fibers functionalized with superhydrophilic coated pDA/TiO2/SiO2 with photoluminescent self-cleaning properties for efficient oil-water separation

The adhesion of high-viscosity oil contamination poses limitations on three-dimensional (3D) materials' practical use in treating oilfield-produced water (OPW). In this study, we developed a hybrid pDA/TiO2/SiO2 coating (PTS) on the surface of hydrophilic activated carbon (ACF1) through a combination of dopamine (DA) polymerization, ethyl orthosilicate (TEOS) hydrolysis, and the condensation of TiO2 nanoparticles (NPs) with SiO2 NPs. This coating was designed for gravity-based oil-water separation. The inherent porosity and generous pore size of ACF1-PTS conferred it an ultra-high permeation flux (pure water flux of 3.72 × 105 L∙m-2∙h-1), allowing it to effectively separate simulated oil-water mixtures and oil-water emulsions while maintaining exceptional permeation flux and oil rejection efficiency. When compared to cleaning methods involving ethanol aqueous solutions and NaClO, ultraviolet (UV) illumination cleaning proved superior, enabling oil-contaminated ACF1-PTS to exhibit remarkable flux recovery efficiency and oil-removal capabilities during cyclic separation of actual OPW. Furthermore, the ACF1-PTS material demonstrated impressive stability and durability when exposed to acidic environments (acid, alkali, and salt), robust hydraulic washout conditions, and 25-cycle tests. This study offers valuable insights and research avenues for the development of highly efficient and environmentally friendly 3D oil-water separation materials for the actual treatment of OPW.

Robust PVA/GO@MOF membrane with fast photothermal self-cleaning property for oily wastewater purification

The poor mechanical durability and weak fouling resistance of oil/water separation membranes severely restrict their applications in industry. Herein, a robust PVA/GO@MOF membrane with fast photothermal self-cleaning capability was developed through facile chemical crosslinking and suction-filtration strategies. Attributed to the powerful underwater superoleophobicity, the PVA/GO@MOF membrane exhibited extraordinary anti-oil adhesion even for high-viscosity crude oil and continuous crude oil emulsion purification capability with stable flux (1020 L m-2 h-1 bar-1) and exceptional efficiency (> 99.3%) even after 60 min. Most importantly, in comparison to reported photocatalytic self-cleaning oil/water separation membranes, the PVA/GO@MOF membrane can degrade organic contaminants more rapidly with a higher degradation rate (99.9%) in 50 min due to the superior photothermal conversion capacity. The synergistic photothermal and photocatalytic effects significantly enhanced photodegradation efficiency, which created opportunities for in-depth treatment of complex oily wastewater. Besides, the obtained membrane displayed excellent chemical and mechanical durability with underwater oil contact angle (UWOCA) above 150° even in harsh environments, such as corrosive solutions, UV irradiation, ultrasound treatment, abrasion experiment and bending test. Therefore, the developed PVA/GO@MOF membrane with robust durability and fast photocatalytic self-cleaning property is highly expected to purify oily wastewater and degrade organic pollutants.

A solar-driven degradation-evaporation strategy for membrane self-cleaning in the efficient separation of viscous crude oil/water emulsions

Membrane separation techniques are promising methods for effectively treating hazardous emulsified oily wastewater, but membrane fouling remains a serious challenge because the high viscosity and complex composition of crude oil make it easy to adhere to membranes and difficult to be removed by conventional physical or chemical cleaning means. Herein, a two-stage solar-driven (photo-Fenton degradation/evaporation) strategy was proposed to realize the self-cleaning of membranes fouled by viscous crude oil (>60,000 mPa s), wherein the photo-Fenton process helped to degrade the heavy components into light components, and all light components removed during the solar-driven evaporation process. A 1D/2D heterostructure membrane with photo-Fenton activity and anti-crude-oil-fouling performance was prepared via a facile self-assembly vacuum-assist method. The addition of rod-like g-C₃N₄ (RCN) increased the interlayer distance of α-FeOOH/porous g-C₃N₄ (FPCN) nanosheets, resulting in a high permeation flux. The FPCN-RCN membrane exhibited both high permeation flux of 779 ± 19 L m^-2h^-1bar^-1 and a separation efficiency of 99.4% for highly viscous crude oil-in-water emulsion. Importantly, the viscous crude oil fouled on the membrane was completely removed by the photo-Fenton degradation/solar-driven evaporation strategy, and the flux recovery rate of the membrane was ∼100%. Therefore, the FPCN-RCN membrane combined with the novel self-cleaning strategy exhibits great potential for practical emulsified oily wastewater treatment.

Advances in two-dimensional materials for energy-efficient and molecular precise membranes for biohydrogen production

Waste management has become an ever-increasing global issue due to population growth and rapid globalisation. For similar reasons, the greenhouse effect caused by fossil fuel combustion, is leading to chronic climate change issues. A novel approach, the waste-to-hydrogen process, is introduced to address the concern of waste generation and climate change with an additional merit of production of a renewable, higher energy density than fossil fuels and sustainable transportation fuel, hydrogen (H2) gas. In the downstream H2 purifying process, membrane separation is one of the appealing options for the waste-to-hydrogen process given its low energy consumption and low operational cost. However, commercial polymeric membranes have hindered membrane separation process due to their low separation performance. By introducing novel two-dimensional materials as substitutes, the limitation of purifying using conventional membranes can potentially be solved. Herein, this article provides a comprehensive review of two-dimensional materials as alternatives to membrane technology for the gas separation of H2 in waste-to-hydrogen downstream process. Moreover, this review article elaborates and provides some perspectives on the challenges and future potential of the waste-to-hydrogen process and the use of two-dimensional materials in membrane technology.