Advanced oxidation of dodecyl dimethyl benzyl ammonium chloride by VUV/UV/chlorine: Synergistic effect, radicals, and degradation pathway

Ecotoxicity and rapid degradation of quaternary ammonium compounds (QACs) subjected to combined vacuum UV and UV-C treatment

Quaternary ammonium compounds (QACs) are active ingredients in a palette of commercially available disinfectants, sanitizers, and biocides. QACs are widely used because of their broad-spectrum antimicrobial properties but the ubiquitous uses have resulted in frequent detection in aquatic and terrestrial matrices including domestic wastewater, surface waters, urban soils and sediments. An increased domestic QACs consumption has increased the environmental occurrence, and investigation of mitigation methods and effects on non-target organisms are in demand. In this study, we examined the potential ecotoxicity of six QACs and investigated the effect of combined vacuum UV (185 nm) and UV-C (254 nm) irradiation (VUV/UVC) on degradation and mitigation of ecotoxicity of QACs. The study showed that combined VUV/UVC irradiation facilitated rapid degradation of benzalkonium chloride, benzethonium chloride, didecyldimethylammonium chloride, dodecyltrimethylammonium chloride, and hexadecyltrimethylammonium chloride. The estimated half-lives varied between 2 and 7 min, and degradation was affected by the initial QAC concentrations, the UV fluence, and the water matrix. The potential ecotoxicity of QACs and VUV/UVC treated QACs was examined using a battery of test organisms that included the luminescent bacterium Aliivibrio fischeri, the gram-negative and gram-positive bacteria Escherichiacoli and Enterococcus faecalis, the freshwater microalga Raphidocelis subcapitata, and the crustacean Daphia magna. The potential for trophic transfer of QACs was investigated in a simplified aquatic food web. Test organisms from different trophic levels were included to assess adverse effects of bioactive compounds in VUV/UVC treated samples including transformation products. The study showed that several QACs were highly toxic to aquatic test organisms with EC50 and/or EC20 values < 1 μM. VUV/UVC treatment of QACs resulted in substantial photolysis of the parent compounds and comprehensive mitigation of the ecotoxicity potential. VUV/UVC represent an attractive oxidation technology for abatement QACs in contaminated water because the process does not require addition of catalysts or precursors.

Comparative study of UV/chlorine and VUV/chlorine as ultrafiltration membrane pretreatment techniques: Performance, mechanisms and DBPs formation

Membrane fouling, primarily resulting from natural organic matter (NOM) widely existing in water sources, has always been a chief hindrance for the prevalent application of ultrafiltration (UF). Thus, vacuum ultraviolet (VUV)/chlorine process was proposed as a strategy for UF membrane fouling control and ultraviolet (UV)/chlorine process was used for comparison. VUV/chlorine process exhibited more excellent performance on NOM removal than UV/chlorine process. [HO•]ss and [Cl•]ss were calculated as 1.26 × 10-13 and 3.06 × 10-14 M, respectively, and ClO• might not exist under the conditions of 0.08 mM chlorine and 30 min VUV irradiation. [HO•]ss, [Cl•]ss and [ClO•]ss were not available and the formation of reactive radicals was unsustainable in UV/chlorine system. Moreover, VUV/chlorine pretreatment also showed better performance on the reversible and irreversible membrane fouling control than UV/chlorine pretreatment. The dominated fouling mechanism in the final stage of filtration was cake filtration. Additionally, the amount of detected disinfection by-products (DBPs) in VUV/chlorine system was significantly lower than that in UV/chlorine system. During subsequent chlorination disinfection, the yield of DBPs with VUV/chorine pretreatment was higher than that with UV/chlorine pretreatment. VUV/chlorine pretreatment could effectively control DBPs formation when the pretreatment time was extended to 120 min. In summary, VUV/chlorine system presented a most excellent performance on membrane fouling control, NOM degradation and DBPs control.

Efficient degradation of benzalkonium chloride by FeMn-CA300 catalyst activated persulfate process: Surface hydroxyl potentiation mechanism and degradation pathway

The consumption of disinfectants increased dramatically with the outbreak of the COVID-19 epidemic. Benzalkonium chloride (DDBAC), a cationic surfactant disinfectant for import and export cargoes, is used for effective degradation method. For DDBAC effective degradation, polyhedral Fe-Mn bimetallic catalyst of Prussian blue analogue (FeMn-CA300) was novelty developed for rapid peroxymonosulfate (PMS) activation. Results showed that the Fe/Mn redox and surface hydroxyl groups in the catalyst played an important role in the DDBAC-enhanced degradation. The removal effectiveness of 10 mg L-1 DDBAC was up to 99.4% in 80 min under the initial pH = 7, catalyst dosage of 0.4 g L-1, and PMS concentration of 15 mmol L-1. In addition, FeMn-CA300 had a wide pH applicability range. The results indicated that hydroxyls, sulfate radicals, and singlet oxygen could effectively improve the degradation efficiency, where sulfate radicals played a crucial role. Finally, the corresponding degradation path of DDBAC was further provided according to GC-MS results. The results of this study provide new insights into the degradation of DDBAC, thereby highlighting the great potential of FeMnca300/PMS to control refractory organic compounds in the aqueous phase.