Co@CoO encapsulated with N-doped carbon nanotubes activated peroxymonosulfate for efficient purification of organic wastewater

An impressive pristine biochar from food waste digestate for arsenic(V) removal from water: Performance, optimization, and mechanism

Anaerobic digestion has become a global practice for valorizing food waste, but the recycling of the digestate (FWD) remains challenging. This study aimed to address this issue by utilizing FWD as a low-cost feedstock for Ca-rich biochar production. The results demonstrated that biochar pyrolyzed at 900 °C exhibited impressive As(V) adsorption performance without any modifications. Kinetic analysis suggested As(V) was chemisorbed onto CDBC9, while isotherm data conformed well to Langmuir model, indicating monolayer adsorption with a maximum capacity of 76.764 mg/g. Further analysis using response surface methodology revealed that pH value and adsorbent dosage were significant influencing factors, and density functional theory (DFT) calculation visualized the formation of ionic bonds between HAsO42- and CaO(110) and Ca(OH)2(101) surfaces. This work demonstrated the potential of using FWD for producing Ca-rich biochar, providing an effective solution for As(V) removal and highlighting the importance of waste material utilization in sustainable environmental remediation.

Clarification of the role of singlet oxygen for pollutant abatement during persulfate-based advanced oxidation processes: Co3O4@CNTs activated peroxymonosulfate as an example

Singlet oxygen (1O2) has often been identified by the popularly used quenching method as a more important reactive species (RS) than sulfate radicals (SO4•-) and hydroxyl radicals (•OH) for pollutant abatement during persulfate-based advanced oxidation processes (PS-AOPs), especially those activated by carbon-based catalysts. However, latest studies have demonstrated that the quenching method actually can often mislead the interpretations of the role of RS for pollutant abatement during AOPs due to various confounding effects caused by adding high-concentration quenchers in the system. To clarify the role of 1O2 in PS-AOPs, this study developed a probe compound-based experimental and kinetic model to quantify the concentrations and exposures of 1O2, SO4•-, and •OH, as well as their relative contributions to pollutant abatement during a cobalt oxide incorporated carbon nanotubes activated peroxymonosulfate (Co3O4@CNTs/PMS) process. Results show that during the Co3O4@CNTs/PMS process, the exposures and transient concentrations of 1O2 were about 19.6 and 41.3 times higher than those of SO4•- and •OH, respectively. However, the relative contribution of 1O2 to the abatement of most pollutants tested in this study (e.g., sulfisoxazole, sulfamethoxyprazine, trimethoprim, and metoprolol) is generally negligible (f1O2 ≤ 8%) compared to that of SO4•- and •OH ( [Formula: see text]  = 15%-98% and f•OH = 2%-78%) because of the significantly lower reactivity of 1O2 with these compounds than that of SO4•- and •OH. Reasons for misidentifying 1O2 as the dominant RS for pollutant abatement by the quenching method were then analyzed based on reaction kinetics principles. The results of this study highlight that while 1O2 can be generated in significant amounts and be present at higher concentrations than SO4•- and •OH in PS-AOP systems, 1O2 is unlikely to be the dominant RS for the abatement of most pollutants during the PS-AOPs because of its weak and selective oxidation capacity, and caution should be taken when using the quenching method to evaluate the role of RS for pollutant abatement by the PS-AOPs.

Bamboo charcoal fiber bundles loaded MOF-derived magnetic Co/CoO porous polyhedron for efficiently catalytic degradation of tetracyclines hydrochloride

The health of living things and the ecosystem of the planet have both been negatively impacted by antibiotic residue in the water environment. There has been a lot of interest in the catalyst made of metal-carbon compounds from MOFs as a potential solution for activating peroxymonosulfate (PMS) to produce reactive oxygen species to catalyze the degradation of residual antibiotics. In this study, zeolitic imidazolate frameworks (ZIF-67) on bamboo fiber bundles (BFB) were pyrolyzed to produce magnetic Co/CoO nanoparticles with porous polyhedrons mounted on bamboo charcoal fiber bundles (BCFB)(BCFB@PCo/CoO). Specific surface area of obtained BCFB@PCo/CoO with abundant active sites arrives at 302.41 m2/g. The catalytic degradation efficiency of Tetracycline hydrochloride (TCH), a target contaminant, could reach up to 99.94% within 15 minutes (PMS = 0.4g/L, Cat. = 0.2g/L). The effects of potential factors, including PMS dosage, interference ions, and temperature, on catalytic degradation efficiencies were investigated. Magnetic recovery and antimicrobial properties of the BCFB@PCo/CoO were also evaluated and the possible degradation pathways were explored. Catalytic mechanism explorations of BCFB@PCo/CoO/PMS system reveal MOF-derived magnetic Co/CoO nanoparticles embedded in BCFB promote the synergistic interaction of both radicals and non-radical pathways for catalytic degradation of TCH. The novel BCFB@PCo/CoO provides an alternative to deal with wastewater containing antibiotics.

Enhanced Heterogeneous Peroxymonosulfate Activation by MOF-Derived Magnetic Carbonaceous Nanocomposite for Phenol Degradation

Degradation efficiency and catalyst stability are crucial issues in the control of organic compounds in wastewater by advanced oxidation processes (AOPs). However, it is difficult for catalysts used in AOPs to have both high catalytic activity and high stability. Combined with the excellent activity of cobalt/copper oxides and the good stability of carbon, highly dispersed cobalt-oxide and copper-oxide nanoparticles embedded in carbon-matrix composites (Co-Cu@C) were prepared for the catalytic activation of peroxymonosulfate (PMS). The catalysts exhibited a stable structure and excellent performance for complete phenol degradation (20 mg L-1) within 5 min in the Cu-Co@C-5/PMS system, as well as low metal-ion-leaching rates and great reusability. Moreover, a quenching test and an EPR analysis revealed that ·OH, O2·-, and 1O2 were generated in the Co-Cu@C/PMS system for phenol degradation. The possible mechanism for the radical and non-radical pathways in the activation of the PMS by the Co-Cu@C was proposed. The present study provides a new strategy with which to construct heterostructures for environmentally friendly and efficient PMS-activation catalysts.

Highly Efficient Copper Doping LaFeO3 Perovskite for Bisphenol A Removal by Activating Peroxymonosulfate

A series of copper doping LaFeO3 perovskite (LaCuxFe1−xO3, LCFO, x = 0.1, 0.4, 0.5, 0.6, 0.9) are successfully synthesized by the sol-gel method under mild conditions. In this study, it is applied for the activation of peroxymonosulfate (PMS) for bisphenol A (BPA) removal. More than 92.6% of BPA was degraded within 30 min at 0.7 g/L of LCFO and 10.0 mM of PMS over a wide pH range with limited leaching of copper and iron ions. The physical–chemical properties of the catalysts were demonstrated by using X-ray diffraction (XRD), N2 adsorption–desorption isotherms, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Furthermore, the effects of catalyst dosage, PMS concentration, initial pH value, and inorganic anions on the LCFO/PMS system were fully investigated. Quenching experiments were performed to verify the formation of reactive oxidant species, which showed that the radical reaction and mechanisms play a great role in the catalytic degradation of BPA. The perovskite LCFO is considered a stable, easy to synthesize, and efficient catalyst for the activation of PMS for wastewater treatment.

2D MOF derived cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets for efficient Fenton-like catalysis: Tuning effect of oxygen functional groups in close vicinity to Co-N sites

Developing highly efficient catalysts for peroxymonosulfate (PMS) activation is an important issue in advanced oxidation processes (AOPs) technology. In this work, cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets derived from 2D metal-organic framework (MOF) were successfully fabricated. The as-prepared catalyst can effectively degrade tetracycline (TC) with a high reaction constant (0.088 min^-1). Quenching test, electron paramagnetic resonance (EPR) technology, and the electrochemical test indicate that the radical pathway plays a minor role in the degradation process, the ¹O₂ based nonradical pathway dominates the reaction. Experimental and density functional theory (DFT) studies revealed that the Co-N sites on the carbon structure serve as the dominant active sites, and the oxygen functional groups in close vicinity to Co-N sites can dramatically influence local electronic structure and its interaction with PMS molecule, a high correlation between the reaction constant and hydroxy groups content could be due to the Co-N sites close to hydroxyl groups has a moderate PMS adsorption energy. This work provides new insight into the design of highly efficient Fenton-like catalysts.