One-pot integration of S-doped BiOCl and ZnO into type-II photocatalysts: Simultaneously boosting bulk and surface charge separation for enhanced antibiotic removal

Suppression of charge recombination using microfibrillated cellulose in carboxymethyl cellulose coatings containing ZnO nanorods and BiOCl during photoelectrocatalysis

Photocatalysts have been extensively developed as they can degrade various water pollutants under light irradiation without chemical consumption. However, photocatalyst reusability and uniform light distribution still limit the scaling up of photocatalytic processes. This study investigated the photoelectrocatalytic (PEC) system removal of dye using zinc oxide nanorods (ZnONRs) and bismuth oxychloride (BiOCl) immobilized in the carboxymethyl cellulose (CMC) coating containing microfibrillated cellulose (MFC). The photocatalytic properties were significantly enhanced by the presence of MFC with 3D fibrous network that could disperse the photocatalyst, reduce recombination, and promote charge migration. The MFC/ZnONRs/BiOCl/CMC coating worked as a photoanode, which removed 78 % of methylene blue (MB) dye within 60 min under UV light irradiation and a low voltage of 2.5 V.

Construction of nitrogen-doped graphene/BiOCl Schottky heterojunction for efficient photocatalytic degradation and CO2 reduction

The advancement of an efficient photocatalyst via a straightforward process is critical for environmental remediation and energy conversion. In this study, a series of multifunctional nitrogen-doped graphene/BiOCl (NGBOC) Schottky heterojunction photocatalysts were successfully prepared by hydrothermal method. The systematic characterization and analysis results showed that the addition of NG guided the formation and growth of BiOCl to thinner and smaller nanosheets, during which, under the strong interaction between both, more abundant oxygen vacancies were introduced into BiOCl and a small amount of N element was doped in lattices, ultimately BiOCl and NG with excellent electron transport form Schottky heterojunction. This series of favorable effects not only improve the adsorption capacity of BiOCl to pollutants, but also accelerate the separation and migration rate of photogenerated carriers. Under visible light, the 3NGBOC with optimal content of NG exhibits the highest photocatalytic activity for the degradation of Rhodamine B (RhB) and tetracycline (TC), which is more than four times higher than that of the reference BiOCl. Meanwhile, The NGBOC photocatalysts is highly reusable and has the potential to be recycled five times. Besides, under simulated sunlight, the conversion rate of CO2 to CO over 3NGBOC was about twice that of a single BiOCl. In addition, capture experiments and room temperature electron paramagnetic resonance (EPR) strongly support the dominant role of hydroxyl radicals and superoxide radicals in photocatalytic reactions. This study reveals the design and preparation of multifunctional BiOCl-based Schottky heterojunction photocatalyst, provides a green economic strategy and promising scheme for promoting environmental remediation and energy conversion.

DFT and experimental studies of the facet-dependent oxygen vacancies modulated WS2/BiOCl-OV S-scheme structure for enhanced photocatalytic removal of ciprofloxacin from wastewater

The present study explores visible light-assisted photodegradation of ciprofloxacin hydrochloride (CIP) antibiotic as a promising solution to water pollution. The focus is on transforming the optical and electronic properties of BiOCl through the generation of oxygen vacancies (OVs) and the exposure of (110) facets, forming a robust S-scheme heterojunction with WS2. The resultant OVs mediated composite with an optimal ratio of WS2 and BiOCl-OV (4-WS2/BiOCl-OV) demonstrated remarkable efficiency (94.3%) in the visible light-assisted photodegradation of CIP antibiotic within 1.5 h. The CIP degradation using 4-WS2/BiOCl-OV followed pseudo-first-order kinetics with the rate constant of 0.023 min-1, outperforming bare WS2, BiOCl, and BiOCl-OV by 8, 6, and 4 times, respectively. Density functional theory (DFT) analysis aligned well with experimental results, providing insights into the structural arrangement and bandgap analysis of the photocatalysts. Liquid chromatography-mass spectrometry (LC-MS) analysis utilized for identifying potentially degraded products while scavenging experiments and electron paramagnetic resonance (EPR) spin trapping analysis elucidated the S-scheme charge transfer mechanism. This research contributes to advancing the design of oxygen vacancy-mediated S-scheme systems in the realm of photocatalysis, with potential implications for addressing water pollution concerns.

Efficient photocatalytic degradation of antibiotics by binary heterojunction complex boron subphthalocyanine bromide/bismuth oxychloride

The development of stable and efficient heterojunction photocatalysts for wastewater environmental purification exhibits a significant challenge. Herien, a promising binary heterojunction complex comprising boron subphthalocyanine bromide/bismuth oxychloride (SubPc-Br/BiOCl) was successfully synthesized using the hydrothermal method, which involved the self-assembled of SubPc-Br on the surface of BiOCl via intermolecular π-π stacking interactions to compose an electron-transporting layer. The photocatalytic efficiency of SubPc-Br/BiOCl for the degradation of tetracycline and the minocycline exhibited a substantial improvement of 29.14% and 53.72%, respectively, compared to the original BiOCl. Experimental characterization and theoretical calculations elucidated that the enhanced photocatalytic performance of the SubPc-Br/BiOCl composite photocatalysts stemmed from the S-scheme electron transport mechanism at the interface between BiOCl and SubPc-Br supramolecules, which broadened the visible light absorption range, increased the carrier molecular efficiency, and accelerated the carriers. Furthermore, molecular dynamic (MD) simulations provided insights into the action trajectories of the two semiconductors, revealing that the presence of SubPc-Br enhances the water and organic pollutant adsorption capabilities of the BiOCl surface within the supramolecular array system. In conclusion, the synthesis and analysis of the binary heterojunction complex SubPc-Br/BiOCl yield valuable insights into the efficient photocatalytic degradation of antibiotics, holding great promise for diverse environmental applications.

Copper-doped bismuth oxychloride nanosheets assembled into sphere-like morphology for improved photocatalytic inactivation of drug-resistant bacteria

The devastating microbiological contamination as well as emerging drug-resistant bacteria has posed severe threats to the ecosystem and public health, which propels the continuous exploitation of safe yet efficient disinfection products and technology. Here, copper doping engineered bismuth oxychloride (Cu-BiOCl) nanocomposite with a hierarchical spherical structure was successfully prepared. It was found that due to the exposure of abundant active sites for the adsorption of both bacteria cells and molecular oxygen in the structure, the obtained Cu-BiOCl with nanosheets assembled into sphere-like morphology exhibited remarkable photocatalytic antibacterial effects. In particular, compared to the pure BiOCl, composite Cu-BiOCl possessed improved antibacterial effects against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Methicillin-resistant Staphylococcus aureus (MRSA). The combination of physicochemical characterizations and theoretical calculations has revealed that copper doping significantly promoted the light absorbance, inhibited the recombination of electron-hole pairs, and enhanced molecular oxygen adsorption, which resulted in more generation of active species including reactive oxygen species (ROS) and h+ to achieve superior photocatalytic bacterial inactivation. Finally, transcriptome analysis on MRSA pinpointed photocatalytic inactivation induced by Cu-BiOCl may retard largely the development of drug-resistance. Therefore, the built spherical Cu-BiOCl nanocomposite has provided an ecofriendly, economical and robust strategy for the efficient removal of drug-resistant bacteria with promising potentials for environmental and healthcare utilizations.

Surface and interface engineering of BiOCl nanomaterials and their photocatalytic applications

BiOCl materials have received much attention because of their unique optical and electrical properties. Still, their unsatisfactory catalytic performance has been troubling researchers, limiting the application of BiOCl-based photocatalysts. Therefore, many researchers have studied the adjustment of BiOCl-based materials to enhance photocatalytic efficiency. This review focuses on surface and interface engineering strategies for boosting the photocatalytic performance of BiOCl-based nanomaterials, including forming oxygen vacancy defects, constructing metal/BiOCl, and the fabrication of semiconductor/BiOCl nanocomposites. The photocatalytic applications of the above composites are also concluded in photodegradation of aqueous pollutants, photocatalytic NO removal, photo-induced H2 production, and CO2 reduction. Special emphasis has been given to the modification methods of BiOCl and photocatalytic mechanisms to provide a more detailed understanding for researchers in the fields of energy conversion and materials sciences.

A superior ternary Z-scheme photocatalyst of Bi/Black Phosphorus nanosheets/P-doped BiOCl containing interfacial P-P bond and metallic mediator for H2O2 production and RhB degradation

Photocatalytic performance is significantly influenced by the efficiency of photogenerated electron-hole pairs separation and transfer. In this paper, rational designed Z-scheme Bi/Black Phosphorus Nanosheets/P-doped BiOCl (Bi/BPNs/P-BiOCl) nanoflower photocatalyst was synthesized by a facile in-situ reduction process. The interfacial P-P bond between Black phosphorus nanosheets (BPNs) and P-doped BiOCl (P-BiOCl) was investigated by the XPS spectrum. The Bi/BPNs/P-BiOCl photocatalysts exhibited enhanced photocatalytic performance for H₂O₂ production and RhB degradation. The optimally modified photocatalyst (Bi/BPNs/P-BiOCl-20) showed an excellent photocatalytic H₂O₂ generation rate of 4.92 mM/h and RhB degradation rate of 0.1169 min^-1 under simulated sunlight irradiation, which was 1.79 times and 1.25 times greater than the P-P bond free Bi/BPNs/BiOCl-20. The mechanism was investigated through charge transfer route, radical capture experiments, and band gap structure analysis, indicating that the formation of Z-scheme heterojunctions and interfacial P-P bond not only enhances the redox potential of the photocatalyst but also facilitates the separation and migration of photogenerated electrons-holes. This work might provide a promising strategy for constructing Z-scheme 2D composite photocatalysts combining interfacial heterojunction and elemental doping engineering for efficient photocatalytic H₂O₂ production and organic dye pollutant degradation.

BiOCl Heterojunction photocatalyst: Construction, photocatalytic performance, and applications

BiOCl semiconductors have attracted extensive amounts of attention and have substantial potential in alleviating energy shortages, improving sterilization performance, and solving environmental issues. To improve the optical quantum efficiency of layered BiOCl, the lifetimes of photogenerated electron-hole pairs, and BiOCl reduction capacity. During the past decade, researchers have designed many effective methods to weaken the effects of these limitations, and heterojunction construction is regarded as one of the most promising strategies. In this paper, BiOCl heterojunction photocatalysts designed and synthesized by various research groups in recent years were reviewed, and their photocatalytic properties were tested. Among them, direct Z-scheme and S-scheme photocatalysts have high redox potentials and intense redox capabilities. Hence, they exhibit excellent photocatalytic activity. Furthermore, the applications of BiOCl heterojunctions for pollutant degradation, CO2 reduction, water splitting, N2 fixation, organic synthesis, and tumor ablation are also reviewed. Finally, we summarize research on the BiOCl heterojunctions and put forth new insights on overcoming their present limitations.

Ultrasound-Assisted Synthesis of a ZnO/BiVO4 S-Scheme Heterojunction Photocatalyst for Degradation of the Reactive Red 141 Dye and Oxytetracycline Antibiotic

The preparation of novel sunlight active photocatalysts for complete removal of pollutants from aqueous solutions is a vital research topic in environmental protection. The present work reports the synthesis of a ZnO/BiVO4 S-scheme heterojunction photocatalyst for degradation of the reactive red dye and oxytetracycline antibiotic in wastewater. ZnO and BiVO4 were first fabricated by a hydrothermal technique, and then, the ZnO/BiVO4 heterostructure was synthesized using an ultrasonic route. An increase of the surface area, compared to that of ZnO, was found in ZnO/BiVO4. The enhancement of charge separation efficiency at the interface was obtained so that a remarkable enhancement of the photocatalytic performance was detected in the prepared heterojunction photocatalyst. Complete detoxification of harmful pollutants was achieved by using the economical solar energy. The removal of the pollutants follows the first-order reaction with the highest rate constant of 0.107 min-1. The stability of the prepared photocatalyst was detected after five cycles of use. The ZnO/BiVO4 S-scheme heterostructure photocatalyst still provides high photoactivity even after five times of use. Hydroxyl radicals play an important role in the removal of the pollutant. This work demonstrates a new route to create the step-scheme heterojunction with high photoactivity for complete removal of the toxic dye and antibiotic in the environment.

Fabrication of In-S-co-doped two-dimensional BiOCl coupling with surface hydroxylation toward simultaneously efficient charge separation and redox capability for photocatalytic water remediation

Tailoring energy band structure of bismuth oxychloride (BiOCl)-based photocatalysts by virtue of the metal and/or non-metal elements is one of the promising strategy to address environmental issues, especially plays a crucial role in water remediation. However, it still remains a great challenge to balance the light-harvesting and charge carriers separation. Herein, a feasible strategy was proposed for the simultaneous integration of energy-band modulation and surface hydroxylation to alleviate the as-mentioned contradiction and long-standing issues. By using a simple one-pot hydrothermal method, In-S-co-doped BiOCl photocatalyst coupling with surface hydroxylation (denoted as In/BOC-S-OH) was prepared by the simultaneous co-precipitation and ripening process and exhibited a good photocatalytic activity for removing tetracycline (TC) under visible light-irradiation than the counterparts of In-doped BiOCl (In/BOC), S-doped BiOCl (In/BOC-S) or surface -OH modification BiOCl (In/BOC-OH). Such satisfied photocatalytic efficiency benefits from the synergistic effect on the visible light capture, charge migration and separation associated with the introduction of intermediate energy levels and surface defect, respectively. Accompanying with the introduction of In and S hetero-atoms intercalation, both the potentials of valence and conduction bands were adjusted and the reduction of the bandgap could promote the capture of photons. Meanwhile, the powerful polarization effect associated with the non-uniform charge distribution could promote the special separation of carriers. More importantly, the surface defects induced by hydroxylation could act as traps for photogenerated electrons to stimulate the rapid separation of carriers, thereby causing the cleavage of antibiotics on the catalytic surface. This research offers a reliable strategy and promising scheme via effective solar energy conversion and charge carrier separation to advance photocatalytic wastewater remediation.