Electrochemical sensor studies and optical analysis of developed clay based CoFe2O4 ferrite NPs

Sustainable approach of La doped CuFe2O4 nanomaterial for electrochemical lead and paracetamol sensing action with multiple applications

This present research aimed to investigate the novel applications of synthesized La doped CuFe2O4 nanomaterial (LCF NMs) using renewable bio-fuel (Aegle Marmelos extract) by combustion process. The sensor applications were accomplished by modified electrode using LCF NMs with graphite powder and examined its excellent sensing action towards heavy metal (Lead content) and drug chemical (Paracetamol) substances. The thermodynamics of redox potential and super-capacitor behavior of LCF NMs were investigated through Cyclic Voltametric (CV) and Electrochemical Impedance Spectral (EIS) methods under specific conditions at scan rate of 1 to 5 mV/s. The heterogeneous photo-catalytic process of prepared NMs on Fast orange Red (FOR) dye-decolouration was investigated and noted its excellent degradation (91.7%) at 90 min using 20 ppm of dye solution and 40 mg of synthesized samples under Sun-light irradiation. Further, the antibacterial activity of synthesized NMs is investigated against various strains of gram positive (Bacillus subtillis) and gram negative bacteria (Pseudomonas aeruginosa), which confirms that the LCF NMs have higher activity towards gram positive bacteria with an average inhibition zone of 19 mm. This synthesized LCF NMs is a multi-functional material with stable and eco-friendly materials.

Simultaneous Electrochemical Detection of Pb and Cd by Carbon Paste Electrodes Modified by Activated Clay

Calcinated and acidified clay modified carbon graphite electrode was deployed in the simultaneous evaluation of traces of Pb²⁺ and Cd²⁺ in solution. After 5 minutes of accumulation in the circuit, the sensitivity of the electrode was evaluated in a solution of Na₂SO₄ (0.1 M) by square wave voltammetry on the one hand with Pb (II) and on the other hand with Cd (II). Several experimental conditions such as the composition of the carbon clay paste, the effect of preconcentration time, the sweeping speed, concentration effect, media pH, and interference ionic response to the electrochemical response of the working electrode were examined. It was observed that, after 5 minutes of preconcentration, detection limits of 0.15513 μmol·L^-1 and 0.24227 μmol·L^-1 were obtained for Pb²⁺ and Cd²⁺ in the electrolyte solution and 0.08438 μmol·L^-1 and 0.46522 μmol·L^-1, respectively, when tap water was used. The detection was effective by square wave voltammetry with a more intense current density with respect to lead.