A new diagnostic tool for rapid and accurate detection of Mycobacterium tuberculosis

Decoding the hidden realm: Molecular pioneering unravelling osteoarticular tuberculosis diagnosis

Osteoarticular tuberculosis (TB), a form of extrapulmonary tuberculosis, refers to the involvement of Mycobacterium tuberculosis (M.tb) in the bones and joints. While pulmonary tuberculosis is the most common form, osteoarticular TB represents a relatively rare but significant manifestation, accounting for approximately 1-3% of all TB cases. Accurate and timely diagnosis plays a pivotal role in the management of osteoarticular TB. Conventional diagnostic methods for osteoarticular TB, such as acid-fast bacilli smear microscopy and culture, have limitations in terms of sensitivity, specificity, and turnaround time. The purpose of this review is to comprehensively evaluate and synthesize the existing literature on molecular pioneering in osteoarticular TB diagnosis. Molecular techniques, such as nucleic acid amplification tests and gene-based assays, have emerged as promising tools for diagnosing TB. These techniques target specific genetic sequences of M.tb, enabling rapid and sensitive detection of the pathogen. However, the diagnostic accuracy, advantages, and limitations of these molecular techniques in the context of osteoarticular TB diagnosis require further investigation and consolidation of evidence. Furthermore, this review aims to identify areas for future research and development in the field of molecular diagnostics for osteoarticular TB.

Silent Case of Pediatric Osteoarticular Tuberculosis: A Case Report and Review of the Literature

Introduction

Tuberculosis (TB) is one of the most prevalent infectious diseases globally, often presenting with nonspecific symptoms that can obscure diagnosis, especially when it manifests in uncommon sites such as osteoarticular tuberculosis (OA-TB).

Case presentation

We report a rare case of a 9-year-old male diagnosed with right knee tuberculosis after enduring severe symptoms for several months. Despite multiple negative biopsies and aspirates during initial debridement surgeries, a biopsy taken 6 months later confirmed the presence of Mycobacterium tuberculosis (MTB). The patient was subsequently treated with debridement and anti-tubercular therapy.

Conclusion

This case underscores the critical need to consider tuberculosis in patients presenting with chronic bone pain to avoid misdiagnosis, particularly in the developing world. The atypical presentation of osteoarticular tuberculosis in this young patient emphasizes the need for healthcare professionals to recognize subtle symptoms. Advanced imaging studies like MRI and microbiological evaluations, including site biopsies, are essential for accurate diagnosis. Increased awareness and collaborative research are crucial to improving the understanding and management of pediatric osteoarticular tuberculosis and extrapulmonary tuberculosis.

New insight in molecular detection of Mycobacterium tuberculosis

Mycobacterium tuberculosis, the causative agent of tuberculosis, is a pathogenic bacterium that has claimed millions of lives since the Middle Ages. According to the World Health Organization's report, tuberculosis ranks among the ten deadliest diseases worldwide. The presence of an extensive array of genes and diverse proteins within the cellular structure of this bacterium has provided us with a potent tool for diagnosis. While the culture method remains the gold standard for tuberculosis diagnosis, it is possible that molecular diagnostic methods, emphasis on the identification of mutation genes (e.g., rpoB and gyrA) and single nucleotide polymorphisms, could offer a safe and reliable alternative. Over the past few decades, as our understanding of molecular genetics has expanded, methods have been developed based on gene expansion and detection. These methods typically commence with DNA amplification through nucleic acid targeted techniques such as polymerase chain reaction. Various molecular compounds and diverse approaches have been employed in molecular assays. In this review, we endeavor to provide an overview of molecular assays for the diagnosis of tuberculosis with their properties (utilization, challenges, and functions). The ultimate goal is to explore the potential of replacing traditional bacterial methods with these advanced molecular diagnostic techniques.

Non-Microbiological Mycobacterial Detection Techniques for Quality Control of Biological Products: A Comprehensive Review

Mycobacteria can be one of the main contaminants of biological products, and their presence can have serious consequences on patients' health. For this reason, the European Pharmacopoeia mandates the specific testing of biological products for mycobacteria, a critical regulatory requirement aimed at ensuring the safety of these products before they are released to the market. The current pharmacopeial reference, i.e., microbial culture method, cannot ensure an exhaustive detection of mycobacteria due to their growth characteristics. Additionally, the method is time consuming and requires a continuous supply of culture media, posing logistical challenges. Thus, to overcome these issues, pharmaceutical industries need to consider alternative non-microbiological techniques to detect these fastidious, slow-growing contaminating agents. This review provides an overview of alternative methods, which could be applied within a quality control environment for biological products and underlines their advantages and limitations. Nucleic acid amplification techniques or direct measurement of mycobacteria stand out as the most suitable alternatives for mycobacterial testing in biological products.

An insight to the recent advancements in detection of Mycobacterium tuberculosis using biosensors: A systematic review

Since ancient times, Tuberculosis (TB) has been a severe invasive illness that has been prevalent for thousands of years and is also known as "consumption" or phthisis. TB is the most common chronic lung bacterial illness in the world, killing over 2 million people each year, caused by Mycobacterium tuberculosis (MTB). As per the reports of WHO, in spite of technology advancements, the average rate of decline in global TB infections from 2000-2018 was only 1.6% per year, and the worldwide reduction in TB deaths was only 11%. In addition, COVID-19 pandemic has reversed years of global progress in tackling TB with fewer diagnosed cases. The majority of undiagnosed patients of TB are found in low- and middle-income countries where the GeneXpert MTB/RIF assay and sputum smear microscopy have been approved by the WHO as reference procedures for quickly detecting TB. Biosensors, like other cutting-edge technologies, have piqued researchers' interest since they offer a quick and accurate way to identify MTB. Modern integrated technologies allow for the rapid, low-cost, and highly precise detection of analytes in extremely little amounts of sample by biosensors. Here in this review, we outlined the severity of tuberculosis (TB) and the most recent developments in the biosensors sector, as well as their various kinds and benefits for TB detection. The review also emphasizes how widespread TB is and how it needs accurate diagnosis and effective treatment.

Circular RNAs and tuberculosis infection

Tuberculosis (TB) is a deadly infectious disease caused by Mycobacterium tuberculosis (Mtb) that affects the immune system chronically. Therefore, effective control and treatment of tuberculosis requires rapid and accurate diagnostic strategies. Tuberculosis has always been a global burden on health, social and economic systems due to the lack of standard curative and diagnostic (bio)markers. Accordingly, the management and monitoring of patients with active TB at the primary care level may be possible through new, rapid and cost-effective non-sputum-based diagnostic procedures. Biomarkers can help diagnose various diseases, including circular RNA (circRNA), which has recently been introduced as an endogenous, abundant and stable RNA in the cytoplasm with unique tissue specificity. There are frequent reports of circRNA involvement in many pathological and physiological processes in human beings. Recent studies have highlighted the presence of circRNAs in serum and their role as promising biomarkers in the diagnosis of the disease, potentially due to the continuous, stable, closed covalent circular structures and lack of easy degradation by nucleases. The purpose of this review article is to scrutinize the behavior of circulating plasma RNAs in relation to the pathogenesis and diagnosis of tuberculosis.

An Evaluation of The Diagnostic Value of Sputum Smears Microscopy and Pcr Relative to Sputum Culture in The Diagnosis of Pulmonary Tuberculosis: A Systematic Review and Meta-Analysis in Iran

Background: Tuberculosis is one of the oldest known diseases in humans, and early detection of tuberculosis is one of the main measures to decrease the spread of tuberculosis. In many parts of the world, including Iran, the diagnosis of tuberculosis is based on the detection of acid-fast bacillus in sputum smear microscopy and PCR. this study aimed to synthesize evidence on the diagnostic accuracy of sputum smear and PCR compared to sputum culture for the diagnosis of PT in Iranian patients. Methods: This systematic review and meta-analysis was conducted based on PRISMA guideline for systematic review and meta-analysis. Eligible studies were cross-sectional original diagnostic studies published in English and Persian in Iran which examined the sensitivity or specificity(study outcome) of sputum smear microscopy or PCR( as the test) relative to sputum culture (as the gold standard/comparator) among Iranian patients suspected of having tuberculosis( study population). Studies whose data were not complete or extractable were excluded. Results: A total of 3518 subjects were evaluated from 15 eligible studies. The pooled sensitivity of sputum smear and PCR was 75.12 (95% CI: 66.68-83.56) and 88.02 (95% CI: 82.87-93.27), respectively. The specificity for sputum smear and PCR was 93.94 (95% CI: 91.26-96.63) and 91.82 (95% CI: 87.29-96.35) respectively. The sensitivity of both sputum smears was higher in studies published after 2010, and had higher quality. The specificity of sputum smear was a bit lower in studies published after2010 but higher in studies with higher quality. The specificity of PCR was higher in studies published after 2010 but higher in studies with higher quality. Conclusion:The increased sensitivity of sputum smear and PCR during recent years suggests the improvement of preparation and laboratory methods in recent years. However, the imperfect sensitivity of these tests highlights the need for a more accurate diagnostic method for the detection of pulmonary tuberculosis in Iran.

Biosensors for the detection of Mycobacterium tuberculosis: a comprehensive overview

Tuberculosis (TB) infection is one of the leading causes of death in the world. According to WHO reports 2019, the average rate of decrease in global TB incidences was only 1.6% per year from 2000 to 2018, besides that the global decline in TB deaths was just 11%. Therefore, the dire need for early detection of the pathogen for the successful diagnosis of TB seems justified. Mycobacterium tuberculosis secretory proteins have gained more attention as TB biomarkers, for the early diagnosis and treatment of TB. Here in this review, we elaborate on the recent advancements made in the field of piezoelectric, magnetic, optical, and electrochemical biosensors, in addition to listing their merits and setbacks. Additionally, this review also discusses the construction of biosensors through modern integrated technologies, such as combinations of analytical chemistry, molecular biology, and nanotechnology. Integrated technologies enhance the detection for perceiving highly selective, specific, and sensitive signals to detect M. tuberculosis. Furthermore, this review highlights the recent challenges and scope of improvement in numerous biosensors developed for rapid, specific, selective, and sensitive detection of tuberculosis to reduce the TB burden and successful treatment.

Antibiotic resistance modifying ability of phytoextracts in anthrax biological agent Bacillus anthracis and emerging superbugs: a review of synergistic mechanisms

Background and objectives

The chemotherapeutic management of infections has become challenging due to the global emergence of antibiotic resistant pathogenic bacteria. The recent expansion of studies on plant-derived natural products has lead to the discovery of a plethora of phytochemicals with the potential to combat bacterial drug resistance via various mechanisms of action. This review paper summarizes the primary antibiotic resistance mechanisms of bacteria and also discusses the antibiotic-potentiating ability of phytoextracts and various classes of isolated phytochemicals in reversing antibiotic resistance in anthrax agent Bacillus anthracis and emerging superbug bacteria.

Methods

Growth inhibitory indices and fractional inhibitory concentration index were applied to evaluate the in vitro synergistic activity of phytoextract-antibiotic combinations in general.

Findings

A number of studies have indicated that plant-derived natural compounds are capable of significantly reducing the minimum inhibitory concentration of standard antibiotics by altering drug-resistance mechanisms of B. anthracis and other superbug infection causing bacteria. Phytochemical compounds allicin, oleanolic acid, epigallocatechin gallate and curcumin and Jatropha curcas extracts were exceptional synergistic potentiators of various standard antibiotics.

Conclusion

Considering these facts, phytochemicals represents a valuable and novel source of bioactive compounds with potent antibiotic synergism to modulate bacterial drug-resistance.

Neoteric advancements in TB diagnostics and its future frame

Tuberculosis (TB) is one of the major infectious disease that causes threat to human health and leads to death in most of the cases. Mycobacterium tuberculosis is the causative agent that can affect both pulmonary and extra pulmonary regions of the body. This infection can be presented either as an active or latent form in the patients. Although this disease has been declared curable and preventable by WHO, it still holds its position as a global emergency. Over the past decade many hurdles such as low immunity, co-infections like HIV, autoimmune disorders, poverty, malnutrition and emerging trends in drug resistance patterns are hindering the eradication of this infection. However, many programmes have been launched by WHO with involvement of governments at various level to put a full stop over the disease. Under the Revised National Tuberculosis Control Programme (RNTCP) which was recently renamed as National Tuberculosis Elimination Programme (NTEP), the major focus is on eliminating tuberculosis by the year 2025. The main aim of the programme is to identify feasible quality testing, evaluate through NIKSHYA poshak yozana, restrict through BCG vaccination and assemble with public awareness to eradicate MTB. Numerous novel diagnostic techniques and molecular tools have been developed to elucidate and differentiate report of various suspected and active tuberculosis patients. However, improvements are still required to cut short the duration of the overall process ranging from screening of patients to their successful treatment.

Dataset of complete genome assembly and analysis of mycobacterium tuberculosis strain SIT745/EAI1-MYS

In this dataset, we report the genome assembly and data analysis of Mycobacterium tuberculosis strain SIT745/EAI1-MYS. Previously, this strain was isolated from a Malaysian patient with extra-pulmonary tuberculosis, and identification of this strain is done by spoligotype patterns with fifteen known Shared International Type (SITs). Further analysis showed that this strain has a remarkable phylogeographical specificity for Malaysia. Based on the National Center for Biotechnology Information (NCBI) nucleotide database information, the complete genome consists of 150 contigs with various sequence lengths and was not assembled. In this assembly, the aforementioned contigs along with reference sequence from Mycobacterium tuberculosis strain H37Rv and Mycobacterium bovis strain AF2122/97 was used for gap closures, were assembled into a single circular chromosome length of approximately 4.42 Mega bases (Mb) with an average GC content of 65.6%. The single circular chromosome was shown to contain 4,009 protein-coding sequences, 3 ribosomal RNAs, 45 transfer RNAs, and 12 superclasses distributed with 277 subsystems which constitute nearly 1900 genes, respectively. The genome information will provide fundamental knowledge of this organism as well as insight for understanding genomic and proteomic profiling, phylogenetic relationship.

Automatic microscopic detection of mycobacteria in sputum: a proof-of-concept

The laboratory diagnosis of lung mycobacterioses including tuberculosis comprises the microscopic examination of sputum smear after appropriate staining such as Ziehl-Neelsen staining to observe acid-fast bacilli. This standard procedure is operator-dependant and its sensitivity depends on the duration of observation. We developed and evaluated an operator-independent microscopic examination of sputum smears for the automated detection and enumeration of acid-fast bacilli using a ZEISS Axio Scan.Z1 microscope. The sensitivity, specificity, positive predictive value, negative predictive values and accuracy were calculated using standard formulations by comparison with standard microscopic examination. After in-house parameterization of the automatic microscope and counting software, the limit of detection evaluated by seeding negative sputa with Mycobacterium bovis BCG or Mycobacterium tuberculosis H37Rv (10⁰–10⁵ bacilli/mL) was of 10² bacilli/mL of sputum with a 100% positivity rate. Then, the evaluation of 93 sputum specimens including 34 smear-positive and 59 smear-negative specimens yielded a sensitivity of 97.06% [84.67–99.93%], a specificity of 86.44% [73.01–92.78%]. Up to 100 smear slides could be stocked for reading in the microscope magazine and results are exportable into the laboratory information system. Based on these preliminary results, we are implanting this automatic protocol in the routine workflow so that only smears detected positive by automatic microscopy are confirmed by standard microscopic examination.

Nano-biosensing approaches on tuberculosis: Defy of aptamers

Tuberculosis is a major global health problem caused by the bacterium Mycobacterium tuberculosis (Mtb) complex. According to WHO reports, 53 million TB patients died from 2000 to 2016. Therefore, early diagnosis of the disease is of great importance for global health care programs. The restrictions of traditional methods have encouraged the development of innovative methods for rapid, reliable, and cost-effective diagnosis of tuberculosis. In recent years, aptamer-based biosensors or aptasensors have drawn great attention to sensitive and accessible detection of tuberculosis. Aptamers are small short single-stranded molecules of DNA or RNA that fold to a unique form and bind to targets. Once combined with nanomaterials, nano-scale aptasensors provide powerful analytical platforms for diagnosing of tuberculosis. Various groups designed and studied aptamers specific for the whole cells of M. tuberculosis, mycobacterial proteins and IFN-γ for early diagnosis of TB. Advantages such as high specificity and strong affinity, potential for binding to a larger variety of targets, increased stability, lower costs of synthesis and storage requirements, and lower probability of contamination make aptasensors pivotal alternatives for future TB diagnostics. In recent years, the concept of SOMAmer has opened new horizons in high precision detection of tuberculosis biomarkers. This review article provides a description of the research progresses of aptamer-based and SOMAmer-based biosensors and nanobiosensors for the detection of tuberculosis.