Enhancing food waste biodegradation rate in a food waste biodigester with the synergistic action of hydrolase-producing Bacillus paralicheniformis GRA2 and Bacillus velezensis TAP5 co-culture inoculation

Multiple Strategies Enhance 7-Dehydrocholesterol Production from Kitchen Waste by Engineered Yarrowia lipolytica

7-Dehydrocholesterol (7-DHC) is an important precursor of vitamin D3. The microbial synthesis of 7-DHC has attracted substantial attention. In this study, multiple strategies were developed to create a sustainable green route for enhancing 7-DHC yield from kitchen waste by engineered Yarrowia lipolytica. Y. lipolytica strains were engineered and combined with various Δ24-dehydrocholesterol reductases. Overexpressing all the genes in the mevalonate pathway improved the precursor pool, increasing the 7-DHC titer from 21.8 to 145.6 mg/L. Additionally, optimizing medium components using the response surface method significantly raised the 7-DHC titer to 391.0 mg/L after shake flask cultivation. The engineered strain yielded a record 7-DHC titer of 3.5 g/L in a 5-L bioreactor when kitchen waste was used as a carbon source. Overall, these results demonstrate that engineered Y. lipolytica efficiently synthesizes 7-DHC from waste lipid feedstock, offering a promising route for its bioproduction.

Development of oriented microbial consortium-based compound enzyme strengthens food waste hydrolysis and antibiotic resistance genes removal: Deciphering of performance, metabolic pathways and microbial communities

Enzymatic hydrolysis has been considered as an eco-friendly pretreatment method for enhancing bioconversion process of food waste (FW). However, existing commercial enzymes and microbial monomer-based compound enzymes (MME) have the issues of uneven distribution of enzymatic activity and low matching degree with the components of FW, leading to low efficiency with enzymatic hydrolysis and removal of antibiotic resistance genes (ARGs). This study used FW as the substrate, under the co-culture system, produced a microbial consortium-based compound enzymes (MCE) with oriented and well-matching degree for FW hydrolysis and ARGs removal, of which the performance, metabolic pathways and microbial communities were also investigated in depth. Results showed that the best performance for ARGs was achieved by the MCE prepared by mixing 1:5 of Aspergillus oryzae and Aspergillus niger after 12 days fermentation. The highest soluble chemical oxygen demand (SCOD) concentration and ARGs removal could respectively reach 83.90 ± 1.67 g/L and 45.95% after MCE pretreatment. The analysis of metabolic pathways revealed that 1:5 MCE pretreatment strengthened the catalytic activity of carbohydrate-active enzymes, increased the abundances of genes involved in cellulose and starch degradation, polysaccharide synthesis, ATP binding cassette (ABC) transporters and global regulation, while decreased the abundances of genes involved in mating pair formation system, two-component regulatory systems and quorum sensing, thereby enhanced FW hydrolysis and restrained ARGs dissemination. Microbial community analysis further indicated that the 1:5 MCE pretreatment promoted growth, metabolism and richness of functional microbes, while inhibited the host microbes of ARGs. It is expected that this study can provide useful insights into understanding the fate of ARGs in food waste during MCE pretreatment process.

The migration regularity and removal mechanism of antibiotic resistance genes during in situ enzymatic hydrolysis and anaerobic digestion of food waste

This study developed a high efficiency compound enzyme (fungal mash) produced in situ from food waste (FW) used for improving hydrolysis and anaerobic digestion (AD) efficiency of FW. Results showed that the soluble COD and methane yield were respectively increased by 67.80% and 16.58% after 24 h in situ enzymatic hydrolysis of food waste by fungal mash. Furthermore, most of target ARGs in FW were also reduced by 45-94% after 24 h in situ enzymatic hydrolysis, while the total tested ARGs and intI1 were respectively further removed by 44-55% and 21-73% in subsequent AD process. In-depth analysis showed that fungal mash could effectively reduce potential hosts and control the horizontal transfer of ARGs during the in situ enzymatic hydrolysis and AD process. Ultimately, correlation analysis and redundancy analysis indicated that the evolution of bacterial communities and changes in intI1 where the common driving forces for the fate of ARGs.

Mutualistic microbial community of Bacillus amyloliquefaciens and recombinant Yarrowia lipolytica co-produced lipopeptides and fatty acids from food waste

Bioconversion is an important method for transforming food waste (FW) into high value-added products, rendering it harmless, and recycling resources. An artificial microbial consortium (AMC) was constructed to produce FW-based lipopeptides in order to investigate the strategy of FW bioconversion into value-added products. Exogenous fatty acids as a precursor significantly improved the lipopeptide production of Bacillus amyloliquefaciens HM618. To enhance fatty acid synthesis and efflux in AMC, the recombinant Yarrowia lipolytica YL21 (strain YL21) was constructed by screening 12 target genes related to fatty acids to replace exogenous fatty acids in order to improve lipopeptide production. The levels of fengycin, surfactin, and iturin A in the AMC of strains HM618 and YL21 reached 76.19, 192.80, and 31.32 mg L^-1, increasing 7.24-, 12.13-, and 3.23-fold compared to the results from the pure culture of strain HM618 in flask with Landy medium, respectively. Furthermore, free fatty acids were almost undetectable in the co-culture of strains HM618 and YL21, although its level was around 1.25 g L^-1 in the pure culture of strain YL21 with Landy medium. Interestingly, 470.24 mg L^-1 of lipopeptides and 18.11 g L^-1 of fatty acids were co-produced in this AMC in a bioreactor with FW medium. To our knowledge, it is the first report of FW biotransformation into co-produce of lipopeptides and fatty acids in the AMC of B. amyloliquefaciens and Y. lipolytica. These results provide new insights into the biotransformation potential of FW for value-added co-products by AMC.

Organic wastes bioremediation and its changing prospects

Increasing inappropriate anthropogenic activities and industrialization have resulted in severe environmental pollution worldwide. Their effective treatment is vital for general health concerns. Depending on the characteristics of pollutants, the severity of pollution may differ. For sustainable treatment of polluted environments, bioremediation is accepted as the most efficient, economical, and environmentally friendly method hence largely preferred. However, every bioremediation technique has its own unique advantages and limitations due to its defined applications criteria. In bioremediation, microorganisms play a decisive role in detoxification by degrading, mineralizing and accumulating various forms of harmful and biodegradable pollutants from the surroundings and transforming them into less lethal forms. Bioremediation is performed ex-situ or in-situ, based on location of polluted site as well as characteristics, type and strength of the pollutants. Furthermore, the most popular methodologies for bioremediation include bioaugmentation, biostimulation, bioattenuation among others which depend on the prevailing environmental factors into the microbial system. Implementing them appropriately and effectively under ex-situ or in-situ method is extremely important not only for obtaining efficient treatment but also for the best economic, environmental, and social impacts. Therefore, this review aims to analyze various bioremediation methods for organic pollutants remediation from soil/sediments and wastewater, their strength, limitation, and insights for the selection of appropriate bioremediation techniques based on nature, types, degree, and location of the pollution. The novelty aspect of the article is to give updates on several key supporting technologies which have recently emerged and exhibited great potential to enhance the present bioremediation efficiency such as nanobubble, engineered biochar, mixotrophic microalgae, nanotechnology etc. Moreover, amalgamation of these technologies with existing bioremediation facilities are significantly changing the scenario and scope of environmental remediation towards sustainable bioremediation.