Alizarin Dye based ultrasensitive plasmonic SERS probe for trace level Cadmium detection in drinking water

Colorimetric-SERS dual-mode sensing of Pb(II) ions in traditional Chinese medicine samples based on carbon dots-capped gold nanoparticles as nanozyme

Peroxidase (POD)-mimicking nanozymes have got great progress in the sensing field, but most nanozyme assaying systems are built with a single-signal output mode, which is vulnerable to the effect of different factors. Thus, establishment of a dual-signal output mode is necessary for acquiring dependable and durable performance. This work described an Fe doped noradrenaline-based carbon dots and Prussian blue (Fe,NA-CDs/PB) nanocomposite as a POD-like nanozyme and modified gold nanoparticles (AuNPs) for the colorimetric and surface-enhanced Raman scattering (SERS) dual-mode sensor of Pb(II) in traditional Chinese medicine samples. With 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and 3,3',5,5'-tetramethylbenzidine (TMB) as the substrates, it was found that the addition of Pb(II) inhibited the POD-like activity of Fe,NA-CDs/PB and AuNPs, so it was used for colorimetric and SERS dual-mode assays. The POD-like activity was shown to be a "ping-pong" catalytic mechanism, whereas the addition of Pb(II) produced noncompetitive inhibition with modulatory effects on Fe,NA-CDs/PB. The linear response range for colorimetric and SERS sensor detection of Pb(II) was 0.01-1.00 mg/L with the detection limit of 5 μg/L and 8 μg/L, respectively. This dual-mode detection system shows excellent selectivity. More importantly, the Pb(II) in traditional Chinese medicine samples have successfully assayed with good recovery from 90.4 to 108.9 %.

Rapid and sensitive in situ detection of heavy metals in fish using enhanced Raman spectroscopy

Heavy metals have been widely applied in industry, agriculture, and other fields because of their outstanding physics and chemistry properties. They are non-degradable even at low concentrations, causing irreversible harm to the human and other organisms. Therefore, it is of great significance to develop high accuracy and sensitivity as well as stable techniques for their detection. Raman scattering spectroscopy and atomic absorption spectrophotometer (AAS) were used parallelly to detect heavy metal ions such as Hg, Cd, and Pb of different concentrations in fish samples. The concentration of the heavy metals is varied from 5 ppb to 5 ppm. Despite the satisfactory recoveries of AAS, their drawbacks are imperative for an alternative technique. In Raman scattering spectroscopy, the intensities and areas of the characteristic peaks are increased with increasing the concentration of the heavy metals. For Hg concentration ≥ 1 ppm, a slight shift is observed in the peak position. The obtained values of peak intensity and peak area are modeled according to Elvoich, Pseudo-first order, Pseudo-second order, and asymptotic1 exponential model. The best modeling was obtained using the Elovich model followed by the asymptotic1 exponential model. The introduced Raman spectroscopy-based approach for on-site detection of trace heavy metal pollution in fish samples is rapid, low-cost, and simple to implement, increasing its visibility in food safety and industrial applications.

Surface-enhanced Raman spectroscopy as a powerful method for the analysis of Chinese herbal medicines

Chinese herbal medicines (CHMs) derived from nature have received increasing attention and become more popular. Due to their diverse production processes, complex ingredients, and different storage conditions, it is highly desirable to develop simple, rapid, efficient and trace detection methods to ensure the drug quality. Surface-enhanced Raman spectroscopy has the advantages of being time-saving, non-destructive, usable in aqueous environments, and highly compatible with various biomolecular samples, providing a promising analytical method for CHM. In this review, we outline the major advances in the application of SERS to the identification of raw materials, detection of bioactive constituents, characterization of adulterants, and detection of contaminants. This clearly shows that SERS has strong potential in the quality control of CHM, which greatly promotes the modernization of CHM.

Plasmonic Array at the Liquid-Liquid Interface: A Dual-Mode Optical Sensing Platform for Multianalytes

Analyte-triggered nanoparticle (NP) assemblies in bulk colloidal suspension have been extensively utilized in various optical sensors. Nevertheless, the assembling process is still limited by the slow diffusion dynamics of NPs and the low concentration of analytes in trace detections, which hinders further improvement of the sensitivity and repeatability of the sensors. In this work, by functionalizing the gold NPs with specific ligands, we constructed a dual-mode optical sensing platform for multianalytes based on the plasmonic NP array at the liquid-liquid interface. Through emulsification, the NP diffusion kinetics are boosted for several orders, and the NPs are condensed from the bulk aqueous phase to the liquid-liquid interface as a plasmonic array. The as-formed metasurface generates major reflectance and surface-enhanced Raman scattering changes in response to analytes, providing two optical sensing modes. As prototypes, cysteine and glucose are selected as the target molecules, achieving the limit of detection as 193 ± 2 and 297 ± 12 pM, respectively.

Magnetic iron oxide cores with attached gold nanostructures coated with a layer of silica: An easily, homogeneously deposited new nanomaterial for surface-enhanced Raman scattering measurements

Nanostructures made of magnetic cores (Fe₃O₄) with many smaller plasmonic (Au) nanostructures attached were covered with a very thin layer of silica. The first example of the application of this type of material for surface-enhanced Raman scattering (SERS) measurements is presented. (Fe₃O₄@Au)@SiO₂ nanoparticles turned out to be very efficient substrates for SERS measurements. Moreover, due to the nanomaterial's strong magnetic properties, it can be easily manipulated using a magnetic field, and it is therefore possible to form homogeneous layers (with no significant 'coffee-ring' effect) of (Fe₃O₄@Au)@SiO₂ nanoparticles using a very simple procedure: depositing a drop of a sol of such nanoparticles and evaporating the solvent after placing the sample in a strong magnetic field. Synthesised (Fe₃O₄@Au)@SiO₂ nanostructures have been used for the SERS detection of penicillin G in milk. Good quality SERS spectra of penicillin G were obtained even at a concentration of penicillin G in milk of 1 nmol/l - this means that the SERS detection of penicillin G in milk is possible at a concentration lower than the maximum residue limit of penicillin G in milk established by the European Commission. .

Green reduction of silver nanoparticles for cadmium detection in food using surface-enhanced Raman spectroscopy coupled multivariate calibration

Cadmium (Cd) causes pervasive harm on human health as a poisonous heavy metal. This study proposed a surface-enhanced Raman spectroscopy (SERS) approach using sodium alginate (SA) as green reductant in combination with edge enrichment and chemometrics to build label-free Cd quantitative models. The silver nanoparticles synthesized by SA had good dispersion and enhancement factor (3.48 × 10⁵). The optimal detection system was established by optimizing the concentration of specific molecules (trimercaptotriazine) and the droplet volume of measured liquid. Partial least squares models based on preprocessing methods and selection algorithms were compared. The results indicated that the model combined with first-order derivative preprocessing and competitive adaptive reweighted sampling algorithms achieved the best performance (R_p = 0.9989, RMSEP = 1.6225) with the limit of detection of 2.36 × 10^-5 μg L^-1 in food. The SERS approach combined with edge enrichment and chemometrics holds promise for rapid and label-free determination of Cd in food.

The First Silver-Based Plasmonic Nanomaterial for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy with Magnetic Properties

Nanostructures made of magnetic cores (from Fe₃O₄) with attached silver plasmonic nanostructures were covered with a very thin layer of silica. The (Fe₃O₄@Ag)@SiO₂ magnetic–plasmonic nanomaterial can be manipulated using a magnetic field. For example, one can easily form homogeneous layers from this nanomaterial using a very simple procedure: deposition of a layer of a sol of such a nanostructure and evaporation of the solvent after placing the sample in a strong magnetic field. Due to the rapid magnetic immobilization of the magnetic–plasmonic nanomaterial on the investigated surface, no coffee-ring effect occurs during the evaporation of the solvent. In this contribution, we report the first example of a magnetic, silver-based plasmonic nanomaterial for shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Nanoresonators based on silver plasmonic nanostructures locally enhance the intensity of the exciting electromagnetic radiation in a significantly broader frequency range than the previously used magnetic SHINERS nanoresonators with gold plasmonic nanostructures. Example applications where the resulting nanomaterial was used for the SHINERS investigation of a monolayer of mercaptobenzoic acid chemisorbed on platinum, and for a standard SERS determination of dopamine, are also presented.

Process optimization for the synthesis of functionalized Au@AgNPs for specific detection of Hg2+ based on quality by design (QbD)

The current study highlights the advantages of using the quality by design (QbD) approach to synthesise and optimize SERS substrates for the detection of Hg²⁺. Considering that the performance of Au@AgNPs is affected by many factors, Plackett–Burman (PB) experimental design was used to determine the critical process parameters (CPPs) for evaluating the performance of Au@AgNPs. The quantitative relationships between the CPPs and the critical quality attributes (CQAs) were assessed by Box-Behnken Design (BBD). The optimal design space for Au@AgNPs was calculated via a Monte Carlo algorithm. Finally, detection of Hg²⁺ in the range of 1 ∼ 100 ng mL⁻¹ (R² = 0.9891) was achieved by SERS in combination with 4,4-bipyridine (Dpy) as signal molecules. The recoveries for licorice ranged from 83.53% to 92.96%. Specificity and practicality studies indicated that the method based on the QbD concept and design space not only met the optimal performance of Au@AgNPs but also improved the rapid detection of Hg²⁺ in Chinese medicine samples.

The current study highlights the advantages of using the quality by design (QbD) approach to synthesise and optimize SERS substrates for the detection of Hg²⁺.

Colorimetric Measurement of Deltamethrin Pesticide Using a Paper Sensor Based on Aggregation of Gold Nanoparticles

Deltamethrin (DEL) is one of the most commonly used pyrethroid pesticides that can cause serious harms to the ecological environment and human health. Herein, we have developed a paper-based colorimetric sensor impregnated with gold nanoparticles (AuNPs) for on-site determination of DEL pesticide. AuNPs show obvious color change on paper device with the presence of DEL. Measuring the gray intensity of the AuNPs on the reaction zone of the paper sensor allows accurate quantitative analysis. The detection mechanism of DEL on paper sensor was confirmed by UV-Vis spectrophotometry (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscope (TEM). Under optimal conditions, the colorimetric sensor exhibited high sensitivity, rapid detection, and low detection limit within the values stipulated by Chinese detection standards (LOD = 0.584 mg/L). Besides, detecting DEL in vegetable and fruit samples also gave satisfying results, which were much consistent with those obtained by spectrophotometry. Overall, this work provided a user-friendly, cost-effective and visualized detection platform, which could be applied to rapidly detect DEL pesticides in the food safety field.

Surface adsorption of hydroxyanthraquinones on CTAB-modified gold nanosurfaces

Gold nanosurfaces are widely applied to the surface-enhanced Raman spectroscopy (SERS) detection of the biological systems. The surface modification of gold nanoparticles (AuNPs) is often required when the analytes do not efficiently adsorb on the surface. In this paper, an aggregation of AuNPs with cetyltrimethylammonium bromide (CTAB) was introduced for the efficient surface adsorption and strong SERS enhancement for a number of hydroxyanthraquinones (HAQs). The SERS of HAQs including 1,2-dihydroxyanthraquinone (alizarin) were strongly enhanced with CTAB-modified AuNPs and deprotonation of alizarin was clearly observed upon the pH change. The CTAB-modified AuNPs are regarded as efficient SERS substrates for many biological molecules with weak surface adsorption.

High-Performance Estimation of Lead Ion Concentration Using Smartphone-Based Colorimetric Analysis and a Machine Learning Approach

Traditional methods for detection of lead ions in water samples are costly and time-consuming. In this work, an accurate smartphone-based colorimetric sensor was developed utilizing a novel machine learning algorithm. In the presence of Pb²⁺ ions in the solution of specifically functionalized gold nanoparticles, the color of solution turns from red to purple. Indeed, the color variation of the solution is proportional to Pb²⁺ concentration. The smartphone camera captures the corresponding color change, and the image is processed by an efficient artificial intelligence protocol. The nonlinear regression approach was used for concentration estimation, in which the parameters of the proposed model are obtained using a new feature extraction algorithm. In prediction of Pb²⁺ concentration, the average absolute error and root-mean-square error were 0.094 and 0.124, respectively. The influence of pH of the medium, temperature, oligonucleotide concentration, and reaction time on the performance of the proposed sensor was carefully investigated and understood to achieve the best sensor response. This novel sensor exhibited good linearity for the detection of Pb²⁺ in the concentration range of 0.5-2000 ppb with a detection limit of 0.5 ppb.

Metal Cation Detection in Drinking Water

Maintaining a clean water supply is of utmost importance for human civilization. Human activities are putting an increasing strain on Earth’s freshwater reserves and on the quality of available water on Earth. To ensure cleanliness and potability of water, sensors are required to monitor various water quality parameters in surface, ground, drinking, process, and waste water. One set of parameters with high importance is the presence of cations. Some cations can play a beneficial role in human biology, and others have detrimental effects. In this review, various lab-based and field-based methods of cation detection are discussed, and the uses of these methods for the monitoring of water are investigated for their selectivity and sensitivity. The cations chosen were barium, cadmium, chromium, copper, hardness (calcium, magnesium), lead, mercury, nickel, silver, uranium, and zinc. The methods investigated range from optical (absorbance/fluorescence) to electrical (potentiometry, voltammetry, chemiresistivity), mechanical (quartz crystal microbalance), and spectrometric (mass spectrometry). Emphasis is placed on recent developments in mobile sensing technologies, including for integration into microfluidics.

Surface-enhanced Raman scattering-based detection of hazardous chemicals in various phases and matrices with plasmonic nanostructures

Surface-enhanced Raman scattering (SERS)-based sensors utilize the electromagnetic-field enhancement of plasmonic substrates with the chemical specificity of vibrational Raman spectroscopy to identify trace amounts of a wide variety of different target analytes while being minimally affected by photobleaching. However, despite many advantageous features of this method, SERS sensors, particularly for detecting hazardous chemicals, suffer from several limitations such as requirement of gigantic signal enhancement that is often poorly controllable, subtle change and degradation of the SERS substrate, consecutive fluctuation of the signal, the lack of reliable receptors for capturing targets of interest and the absence of general principles for detecting various chemicals in different phases and matrices. To overcome these limitations and for SERS sensors to find practical use, one must (1) acknowledge the characteristics of the matrices of target systems, (2) finely engineer and tune the receptors of the SERS sensor to properly extract the target analyte from the phase, and (3) implement additional mechanistic modifications to enhance the plasmonic signal. This minireview underlines the difficulties associated with different phases and a wide range of target analytes, and introduces the practical measures undertaken to overcome the respective difficulties in SERS-based detection of hazardous chemicals.

Ultrathin and Isotropic Metal Sulfide Wrapping on Plasmonic Metal Nanoparticles for Surface Enhanced Ram Scattering-Based Detection of Trace Heavy-Metal Ions

A facile and general strategy is presented for homogenous and ultrathin metal sulfide wrapping on plasmonic metal (PM) nanoparticles (NPs) based on a thiourea-induced isotropic shell growth. This strategy is typically implemented just via adding the thiourea into pre-formed PM colloidal solutions containing target metal ions. The validity of this strategy is demonstrated by taking the wrapped NPs with Au core and CuS shell or Au@CuS NPs as an example. They are successfully fabricated via adding the thiourea and Cu²⁺ solutions into pre-formed Au NP colloidal solution. The CuS shell layer is highly homogenous (<10% in relative standard deviation of shell thickness), regardless of the NPs' shape or curvature. The shell thickness can be controlled from tens down to 0.5 nm just by the addition of different amounts of shell precursors. The formation of the shell layer on the Au NPs can be attributed to the alternative deposition of Cu²⁺ and S^2- ions on the thiourea-modified surface of Au NPs in the solution, which induces the isotropic shell growth. Further, this strategy is of good universality. Many other sulfide-wrapped PM NPs, such as Ag@CuS, Au@PtS₂, Au@HgS, Ag@Ag₂S NPs, and Ag@CuS nanorods, have been successfully obtained with homogeneous and ultrathin shells. Importantly, such ultrathin sulfide-wrapped PM NPs can be used for surface enhanced Raman scattering (SERS)-based detection of trace heavy-metal ions with strong anti-interference via the ion exchange process between the metal sulfide shell and heavy-metal ions. This study provides a simple and controllable route for wrapping the homogenous and ultrathin sulfide layers on the PM NPs, and such wrapped NPs have good practical applications in the SERS-based detection of trace heavy-metal ions.

Graphitic carbon nitride QDs impregnated biocompatible agarose cartridge for removal of heavy metals from contaminated water samples

Highly fluorescent, water-stable graphitic carbon nitride quantum dots (gCN QDs) synthesized by microwave assisted solvo-thermal technique and characterized via optical spectroscopy, XRD, HR-TEM, Fluorescence spectroscopy, FT-IR and Raman spectroscopy. Synthesized gCN were used for the removal of mercury ions from polluted water samples in a microcartridge format. Density functional theory (DFT) calculations revealed a possible interaction of mercury atoms, and embedment of mercury atom onto synthesized gCN surface lead to moderate structural distortion, reduced band gap and altered dielectric response. Experimentally, the excitation dependent fluorescence of QDs is highly compromised in presence of mercuric (Hg²⁺) and other ions, validating the theoretical findings, and establishing their use as metal sensor probes. Hg²⁺ binding ability with gCN QDs was further utilized in developing bioinspired micro-cartridge via covalent conjugation to Agarose microbeads. Micro-cartridge can remove heavy metal contamination from polluted water with a binding efficiency of 24.63 mg HgCl₂ for 10 mg of Agarose-gCN conjugate.

1,2-Dihydroxyanthraquinone: Synthesis, and induced changes in the structural and optical properties of the nanostructured thin films due to γ-irradiation

1,2‑Dihydroxyanthraquinone (Alizarin-AZ) is available, low-cost organic compound. Besides, AZ has multiple applications owing to its drawing attention photoactivity. This paper is devoted to study the influence of Gamma irradiation on the morphology, optical, and dielectric properties of AZ nanostructured thin films. Nanostructure powder of Alizarin is synthesized according to chemical routes. Subsequently, thin films of AZ are fabricated via thermal evaporator. The bared thin film is irradiated at different doses of ⁶⁰Co γ-rays. Furthermore, the bared and irradiated films are characterized via X-ray diffraction (XRD), atomic force microscope (AFM) and UV-Vis-NIR spectroscopy. XRD investigations reveal that the bared film has a nanostructure and the average particle size increases gradually as the γ-irradiation dose increases. AFM images show remarkable increment in the surface roughness of the irradiated film over the bared one. In the light of structure induced changes, clear variations in the optical properties are addressed. Of these, the energy gap decreases gradually as the irradiation dose increases. The film irradiated at 45 kGy shows the highest optical conductivity. Based on our results we suggest AZ nanostructured thin films as potential candidate for optoelectronics devices.

SERS Sensors: Recent Developments and a Generalized Classification Scheme Based on the Signal Origin

Owing to its extreme sensitivity and easy execution, surface-enhanced Raman spectroscopy (SERS) now finds application for a wide variety of problems requiring sensitive and targeted analyte detection. This widespread application has prompted a proliferation of different SERS-based sensors, suggesting the need for a framework to classify existing methods and guide the development of new techniques. After a brief discussion of the general SERS modalities, we classify SERS-based sensors according the origin of the signal. Three major categories emerge from this analysis: surface-affinity strategy, SERS-tag strategy, and probe-mediated strategy. For each case, we describe the mechanism of action, give selected examples, and point out general misconceptions to aid the construction of new devices. We hope this review serves as a useful tutorial guide and helps readers to better classify and design practical and effective SERS-based sensors.

Solvent dependent dispersion behaviour of macrocycle stabilized cobalt nanoparticles and their applications

Cobalt nanoparticles have been prepared by using amine phthalocyanine as a stabilizing agent in one step.

MoS2-Nanosheet-Assisted Coordination of Metal Ions with Porphyrin for Rapid Detection and Removal of Cadmium Ions in Aqueous Media

Molybdenum disulfide (MoS₂) is a two-dimensional (2D) graphene-like material that is gaining great attention because of its potential application in various fields. Here, we reported a self-assembled nanocomposite consisted of MoS₂ nanosheets and 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrintetra(p-toluenesulfonate) (TMPyP), named MoS₂@TMPyP. This nanocomposite can be used as a sensing probe for low cost, rapid, selective detection of cadmium (Cd²⁺) ions. It is found that a new Soret band at 442 nm in UV-vis absorption spectra represented the coordination of Cd²⁺ ions into TMPyP of the MoS₂@TMPyP. The coordination rates between TMPyP and Cd²⁺ ions is greatly accelerated from 72 h to 20 min with the assistance of MoS₂, which is 200 times faster than in the absence of MoS₂. The limit of detection (LOD) of the Cd²⁺ is as low as 7.2 × 10^-8 mol/L. The binding behavior between the cationic TMPyP and MoS₂ nanosheets was corroborated by molecular dynamics simulation and various control experiments. The results demonstrated that electrostatic interaction was the main force for driving TMPyP enriching around the MoS₂ surface, resulting in an accelerated complexation of Cd²⁺ and TMPyP. Moreover, MoS₂@TMPyP nanocomposite can also be used for removing of Cd²⁺ in water. The removal efficiency (RF) of the MoS₂@TMPyP can reach to 91% for high concentrations of Cd²⁺. This work provides a new insight into detection and removal of Cd²⁺ ions in water.

Quantitative Detection of NADH Using a Novel Enzyme-Assisted Method Based on Surface-Enhanced Raman Scattering

An enzymatic method for quantitative detection of the reduced form of nicotinamide-adenine dinucleotide (NADH) using surface-enhanced Raman scattering was developed. Under the action of NADH oxidase and horseradish peroxidase, NADH can generate hydrogen peroxide (H₂O₂) in a 1:1 molar ratio, and the H₂O₂ can oxidize a chromogen into pigment with a 1:1 molar ratio. Therefore, the concentration of NADH can be determined by detecting the generated pigment. In our experiments, eight chromogens were studied, and o-tolidine (OT) was selected because of the unique Raman peaks displayed by its corresponding pigment. The optimal OT concentration was 2 × 10⁻³ M, and this gave the best linear relationship and the widest linear range between the logarithmic H₂O₂ concentration and the logarithmic integrated SERS intensity of the peak centered at 1448 cm⁻¹. Under this condition, the limit of detection for NADH was as low as 4 × 10⁻⁷ M. Two NADH samples with concentrations of 2 × 10⁻⁴ and 2 × 10⁻⁵ M were used to validate the linear relationship, and the logarithmic deviations were less than 3%.

Facile fabrication of silver nanoparticle-coated silica-C18 core–shell microspheres and their applications in SERS detection

We present a one-step method to prepare silver nanoparticle (Ag NP) shell coated functional microspheres as a surface-enhanced Raman scattering (SERS) substrate.

Plasmonic nanoparticles in chemical analysis

In this review various analytical techniques utilising the plasmonic properties of silver and gold nanoparticles have been presented.

Time-dependent SERS spectra monitoring the dynamic adsorption behavior of bipyridine isomerides combined with bianalyte method

Based on the bianalyte method, time-dependent surface-enhanced Raman spectrosopy (SERS) spectra were applied to observe and study the competitive adsorption of bipyridine isomerides 2,2′-bpy and 4,4′-bpy.

Green synthesized nanospherical silver for selective and sensitive sensing of Cd2+colorimetrically

We report here a facile, green and one-pot synthesis of nano-spherical silver (NSS) usingBombax ceibaleaf extract (BCLE) as both a reducing and stabilizing agent.