Maintaining range of motion after cervical discectomy does not prevent adjacent segment degeneration

Comparison of the effects of different artificial discs on hybrid surgery: A finite element analysis

In recent years, artificial cervical discs have been used in intervertebral disc replacement surgery and hybrid surgery (HS). The advantages and disadvantages of different artificial cervical discs in artificial cervical disc replacement surgery have been compared. However, few scholars have studied the biomechanical effects of various artificial disc prostheses on the human cervical spine in HS which include the Anterior Cervical Discectomy and Fusion (ACDF) and Cervical Disc Arthroplasty (CDA). This study compared the biomechanical behavior of Mobi-C and Prestige LP in the operative and adjacent segments during two-level hybrid surgery. A three-dimensional finite element model of C2-C7 was first established and validated. Subsequently, clinical surgery was then simulated to establish a surgical model of anterior cervical fusion at the C4-C5 level. Mobi-C and Prestige-LP artificial disc prostheses were implanted at the C5-C6 level to create two hybrid models. All finite element models were fixed on the lower endplate of the C7 vertebra and subjected to a load of 73.6 N and different directions of 1 Nm torque on the odontoid process of the C2 vertebra to simulate human flexion, extension, lateral bending, and axial rotation. This paper compares the ROM, intervertebral pressure, and facet joint force after hybrid surgery with the intact model. The results show that compared with Prestige LP, Mobi-C can improve ROM of the replacement segment and compensate for the intervertebral pressure of the adjacent segment more effectively, but the facet joint pressure of the replacement segment may be higher.

Congenitally Fused Cervical Spine Is Associated With Adjacent-Level Degeneration in the Absence of Cervical Spine Surgery

BACKGROUND

Cervical fusion surgery is associated with adjacent-level degeneration, but surgical and technical factors are difficult to dissociate from the mechanical effects of the fusion itself.

OBJECTIVE

To determine the effect of fusion on adjacent-level degeneration in unoperated patients using a cohort of patients with congenitally fused cervical vertebrae.

METHODS

We identified 96 patients with incidental single-level cervical congenital fusion on computed tomography imaging. We compared these patients to an age-matched control cohort of 80 patients without congenital fusion. We quantified adjacent-level degeneration through direct measurements of intervertebral disk parameters as well as the validated Kellgren & Lawrence classification scale for cervical disk degeneration. Ordinal logistic regression and 2-way analysis of variance testing were performed to correlate extent of degeneration with the congenitally fused segment.

RESULTS

Nine hundred fifty-five motion segments were analyzed. The numbers of patients with C2-3, C3-4, C4-5, C5-6, and C6-7 congenitally fused segments were 47, 11, 11, 17, and 9, respectively. We found that patients with congenital fusion at C4-C5 and C5-C6 had a significantly greater extent of degeneration at adjacent levels compared with the degree of degeneration at the same levels in control patients and in patients with congenital fusion at other cervical levels, even while controlling for expected degeneration and age.

CONCLUSION

Taken together, our data suggest that congenitally fused cervical spinal segments at C4-C5 and C5-C6 are associated with adjacent-level degeneration independent of fixation instrumentation. This study design removes surgical factors that might contribute to adjacent-level degeneration.

Incidence of Heterotopic Ossification at 10 years After Cervical Disk Replacement: A Systematic Review and Meta-analysis

STUDY DESIGN

Systematic review and meta-analysis.

OBJECTIVE

This study aimed to assess the incidence of heterotopic ossification (HO) 10 years after cervical disk replacement (CDR).

SUMMARY OF BACKGROUND DATA

HO is a common complication after CDR and may limit the range of motion of the artificial disk. As HO usually progresses slowly, a long-term follow-up is required to better understand its incidence. In recent years, the increasing number of original articles reporting 10-year outcomes gives us the opportunity to better understand the long-term incidence of HO.

MATERIALS AND METHODS

We searched PubMed, Medline, Embase, and Cochrane Library databases to identify eligible studies. The incidence of HO was pooled, and subgroup analysis was performed. Meta-regression analyses were conducted to identify factors contributing to heterogeneity.

RESULTS

Eleven studies with at least 10 years of follow-up comprising 1140 patients who underwent CDR were included. The pooled incidence of overall HO was 70% (95% CI, 60%-81%) at 10 years postoperatively, 60% (95% CI, 44%-75%) at five or six years postoperatively, and 50% (95% CI, 27%-72%) at one or two years postoperatively. The pooled incidence of severe HO (grade 3 or 4) was 37% (95% CI, 29%-45%), and mild HO (grade 1 to 2) was 30% (95% CI, 17%-44%) at 10 years of follow-up. Pooled range of motion decreased from 8.59° before surgery to 7.40° 10 years after surgery. Subgroup analysis showed that HO incidence differed according to the prosthesis type. The earlier publication was associated with a higher pooled incidence of severe HO in the meta-regression analysis.

CONCLUSIONS

This is the first meta-analysis providing detailed information on the pooled 10-year incidence of HO after CDR. The incidence of HO seems to increase with the length of follow-up.

LEVEL OF EVIDENCE

3.

Adjacent segment mobility after ACDF considering fusion status at the implant insertion site

PURPOSE

This paper sets out to analyse mobility changes in segments adjacent to the operated segment. Additionally, it investigates the relationship between the degree of fusion in the operated disc space and mobility changes in the adjacent segments.

METHODS

In total, 170 disc spaces were operated on in 104 consecutive patients qualified for one- or two-level surgery. The degree of mobility of segments directly above and below the implant insertion site was calculated. Measurements were performed the day before the surgery and 12 months post-surgery. Functional (flexion and extension) radiographs of the cervical spine and CT scans obtained 12 months post-surgery were used to evaluate the fusion status. The results were subjected to statistical analysis.

RESULTS

Statistically significant increase in mobility was recorded for the segments situated immediately below the operative site, with a mean change in mobility of 1.7 mm. Complete fusion was demonstrated in 101 cases (71.1%), and partial fusion in 43 cases (29.9%). In the complete fusion subgroup, the ranges of both flexion and extension in the segments directly below the operative site were significantly greater than those in the partial fusion (pseudoarthrosis) subgroup.

CONCLUSION

The mobility of the adjacent segment below the implant insertion site was significantly increased at 12 months post-ACDF surgery. The range of this compensatory hypermobility was significantly greater in patients with complete fusion at the ACDF site than in cases of pseudoarthrosis. Implant subsidence was not associated with mobility changes in the segments directly above or directly below the site of ACDF surgery.

Biomechanical analysis of single- and double-level cervical disc arthroplasty using finite element modeling

Recently, many different types of artificial discs have been introduced to persevere the biomechanical behavior of the cervical spine. This study compares the biomechanical behavior of single- and double-level cervical disc arthroplasty, that is "Prestige LP and Mobi-C" on the index and adjacent segment. A three-dimension finite element model of C2-C7 was developed and validated. In single-level prostheses, the Prestige LP or Mobi-C was implanted in the segment C5-C6, while the double-level arthroplasty was integrated at both segments C4-C5 and C5-C6 in the FE model. The intact FE and prosthesis-modified models were constrained from the inferior endplate of the vertebra C7 and applied a compressive load of 73.6 N with a moment load of 1 Nm on the odontoid process of the vertebra C2 to produce flexion/extension, lateral bending, and axial rotation. The prosthesis-modified model's range of motion and intradiscal pressure were determined and compared to the intact model. Also examined the impact of the prostheses on the stress at the bone-implant interface. The range of motion of the implanted segments in both single- and double-levels arthroplasty was increased while that of the adjacent segment of implanted segments decreased. The intradiscal pressure in both levels of arthroplasty was greater than in the intact model. In conclusion, Mobi-C's cervical prostheses could better preserve the normal range of motion and maintain intradiscal pressure than the Prestige LP.

Deep Learning for Adjacent Segment Disease at Preoperative MRI for Cervical Radiculopathy

Background Patients who undergo surgery for cervical radiculopathy are at risk for developing adjacent segment disease (ASD). Identifying patients who will develop ASD remains challenging for clinicians. Purpose To develop and validate a deep learning algorithm capable of predicting ASD by using only preoperative cervical MRI in patients undergoing single-level anterior cervical diskectomy and fusion (ACDF). Materials and Methods In this Health Insurance Portability and Accountability Act-compliant study, retrospective chart review was performed for 1244 patients undergoing single-level ACDF in two tertiary care centers. After application of inclusion and exclusion criteria, 344 patients were included, of whom 60% (n = 208) were used for training and 40% for validation (n = 43) and testing (n = 93). A deep learning-based prediction model with 48 convolutional layers was designed and trained by using preoperative T2-sagittal cervical MRI. To validate model performance, a neuroradiologist and neurosurgeon independently provided ASD predictions for the test set. Validation metrics included accuracy, areas under the curve, and F1 scores. The difference in proportion of wrongful predictions between the model and clinician was statistically tested by using the McNemar test. Results A total of 344 patients (median age, 48 years; interquartile range, 41-58 years; 182 women) were evaluated. The model predicted ASD on the 93 test images with an accuracy of 88 of 93 (95%; 95% CI: 90, 99), sensitivity of 12 of 15 (80%; 95% CI: 60, 100), and specificity of 76 of 78 (97%; 95% CI: 94, 100). The neuroradiologist and neurosurgeon provided predictions with lower accuracy (54 of 93; 58%; 95% CI: 48, 68), sensitivity (nine of 15; 60%; 95% CI: 35, 85), and specificity (45 of 78; 58%; 95% CI: 56, 77) compared with the algorithm. The McNemar test on the contingency table demonstrated that the proportion of wrongful predictions was significantly lower by the model (test statistic, 2.000; P < .001). Conclusion A deep learning algorithm that used only preoperative cervical T2-weighted MRI outperformed clinical experts at predicting adjacent segment disease in patients undergoing surgery for cervical radiculopathy. © RSNA, 2021 An earlier incorrect version appeared online. This article was corrected on September 22, 2021.

In vivo intervertebral kinematics and disc deformations of the human cervical spine during walking

The kinematics of the cervical spine during various functional neck motions has been widely reported. However, no data has been reported on the cervical intervertebral kinematics during walking, the most frequently performed daily functional activity. In this study, we evaluated cervical kinematics and disc deformation of asymptomatic subjects during a gait cycle using a dual fluoroscopic imaging system. Our measurements showed that the vertical translation of the cervical spine (1.6 ± 0.1 Hz) occurred at twice the frequency of the gait cycle (0.8 ± 0.1 Hz). The overall ranges of motion (ROMs) of the entire (C2-T1) cervical spine were 5.0 ± 3.1° in the flexion-extension rotation, 3.4 ± 1.0° in the lateral-bending rotation, and 5.8 ± 2.1° in the axial-twisting rotation during walking. Each intervertebral disc (measured at the disc centre location) dynamically deformed in its axial direction in a range of 16.2 ± 5.7% ~ 23.7 ± 8.7% (without significant differences among different segment levels, p > 0.05), similar to the ranges of shear deformations of the same disc (p > 0.05, except for the C7-T1 disc, where p = 0.010). These data could be useful for improvements of diagnosis and treatment methods of cervical pathologies.

Comparing Heterotopic Ossification in Two Cervical Disc Prostheses

STUDY DESIGN

Retrospective analysis using data from randomized clinical trials.

OBJECTIVE

To compare the occurrence of heterotopic ossification (HO) between two cervical disc prostheses. Clinical outcome and range of motion (ROM) were also evaluated.

SUMMARY OF BACKGROUND DATA

Cervical arthroplasty was reported to be able to maintain the segmental ROM. However, controversy exists since the difference of the occurrence of HO concerning cervical prosthesis is still huge.

METHODS

Patients who underwent anterior cervical discectomy with arthroplasty for a cervical radiculopathy due to a herniated disc from the The Netherlands Cervical Kinematics (NECK) trial (activC; metal endplates with a polyethylene inlay and a keel for primary stability) and the PROCON trial (Bryan; metal-on-polymer with titanium coated endplates without a keel) were analyzed for HO at 12 and 24 months postoperatively. HO was scored according to the McAfee-Mehren classification. Segmental ROM was defined by a custom developed image analysis tool, and global cervical ROM was measured by Cobb's angle. Clinical outcome was evaluated by means of the neck disability index (NDI) as well as physical-component summary (PCS) and mental-component summary (MCS).

RESULTS

At 2-year follow-up, the occurrence of HO was 68% in patients treated with the activC prosthesis (severe HO 55%), which was comparable with 85% (P = 0.12) in patients with the Bryan disc (severe HO 44%; P = 0.43). The HO progression was similar between groups. Clinically, the patients had comparable NDI, PCS, and MCS at 2-year follow-up, and comparable improvement of clinical outcomes. The global ROM in the Bryan group (56.4 ± 10.8°) was significantly higher than in the activC group (49.5 ± 14.0, P = 0.044) at 2-year follow-up.

CONCLUSION

In comparison of two cervical disc prostheses the development of HO is independent on their architecture. Although global ROM was higher in the Bryan prosthesis group, this difference was not deemed clinically important, particularly because the clinical condition of patients with and without severe HO was comparable.

LEVEL OF EVIDENCE

2.

Biomechanical evaluation of adjacent segment degeneration after one- or two-level anterior cervical discectomy and fusion versus cervical disc arthroplasty: A finite element analysis

BACKGROUND AND OBJECTIVE

To compare the biomechanical changes of adjacent segment degeneration (ASD) after one- or two-level anterior cervical discectomy and fusion (ACDF) versus cervical disc arthroplasty (CDA).

METHODS

A three-dimensional finite element (FE) model of intact C2-C7 segments was constructed and validated. In the one-level surgery model, the cage with plate implant or Prestige LP cervical disc prosthesis were integrated at C5-C6 segment into the FE model; while in the two-level surgery model, the prostheses were integrated at both C4-C5 and C5-C6 segments into the FE model. A pure moment of 1.0 Nm combined with a follower load of 73.6 N were imposed on C2 to investigate the flexion-extension, lateral bending, and axial rotation of different segments in the FE model. The segmental range of motion (ROM) and intradiscal pressure of the surgery models were investigated and compared with the intact model.

RESULTS

In the one-level model of ACDF, the ROM at C5-C6 was decreased, the ROM and intradiscal pressure at C4-C5 and C6-C7 segments were increased. In the two-level model of ACDF, the ROM at C4-C5 and C5-C6 were decreased, the ROM and intradiscal pressure at C3-C4 and C6-C7 were increased. However, in both one- and two-level models of CDA, the ROM of surgery segments were preserved, avoiding the increase of the ROM and intradiscal pressure at the adjacent segments.

CONCLUSIONS

Abnormal ROM and intradiscal pressure at the adjacent segments may contribute to the higher risk of ASD after ACDF compared with CDA.