Integration of 3D printing technology in pharmaceutical compounding: Progress, prospects, and challenges

The potential of three-dimensional printing for pediatric oral solid dosage forms

Pediatric patients often require individualized dosing of medicine due to their unique pharmacokinetic and developmental characteristics. Current methods for tailoring the dose of pediatric medications, such as tablet splitting or compounding liquid formulations, have limitations in terms of dosing accuracy and palatability. This paper explores the potential of 3D printing as a solution to address the challenges and provide tailored doses of medication for each pediatric patient. The technological overview of 3D printing is discussed, highlighting various 3D printing technologies and their suitability for pharmaceutical applications. Several individualization options with the potential to improve adherence are discussed, such as individualized dosage, custom release kinetics, tablet shape, and palatability. To integrate the preparation of 3D printed medication at the point of care, a decentralized manufacturing model is proposed. In this setup, pharmaceutical companies would routinely provide materials and instructions for 3D printing, while specialized compounding centers or hospital pharmacies perform the printing of medication. In addition, clinical opportunities of 3D printing for dose-finding trials are emphasized. On the other hand, current challenges in adequate dosing, regulatory compliance, adherence to quality standards, and maintenance of intellectual property need to be addressed for 3D printing to close the gap in personalized oral medication.

Fabrication of 3D-printed scaffolds loaded with gallium acetylacetonate for potential application in osteoclastic bone resorption

We recently reported the potential of a new gallium compound, gallium acetylacetonate (GaAcAc) in combating osteoclastic bone resorption through inhibition of osteoclast differentiation and function. Herein, we focused on 3D-printed polylactic acid scaffolds that were loaded with GaAcAc and investigated the impact of scaffold pretreatment with polydopamine (PDA) or sodium hydroxide (NaOH). We observed a remarkable increase in scaffold hydrophilicity with PDA or NaOH pretreatment while biocompatibility and in vitro degradation were not affected. NaOH-pretreated scaffolds showed the highest amount of GaAcAc loading when compared to other scaffolds (p < 0.05). NaOH-pretreated scaffolds with GaAcAc loading showed effective reduction of osteoclast counts and size. The trend was supported by suppression of key osteoclast differentiation markers such as NFAT2, c-Fos, TRAF6, & TRAP. All GaAcAc-loaded scaffolds, regardless of surface pretreatment, were effective in inhibiting osteoclast function as evidenced by reduction in the number of resorptive pits in bovine cortical bone slices (p < 0.01). The suppression of osteoclast function according to the type of scaffold followed the ranking: GaAcAc loading without surface pretreatment > GaAcAc loading with NaOH pretreatment > GaAcAc loading with PDA pretreatment. Additional studies will be needed to fully elucidate the impact of surface pretreatment on the efficacy and safety of GaAcAc-loaded 3D-printed scaffolds.

3D screen printing technology enables fabrication of oral drug dosage forms with freely tailorable release profiles

3D printing offers new opportunities to customize oral dosage forms of pharmaceuticals for different patient populations, improving patient safety, care, and compliance. Although several notable 3D print technologies have been developed, such as inkjet printing, powder-based printing, selective laser sintering (SLS) printing, and fused deposition modelling (FDM), among others, their capacity is often limited by the number of printing heads. 3D screen-printing (3DSP) is based on a classic flatbed screen printing that is widely used in industrial applications for technical applications. 3DSP can build up thousands of units per screen simultaneously, enabling mass customization of pharmaceuticals. Here, we use 3DSP to investigate two novel paste formulations: immediate-release (IR) and extended-release (ER) using Paracetamol (acetaminophen) as the active pharmaceutical ingredient (API). Both disk-shaped and donut-shaped tablets were fabricated using one or both pastes to design drug delivery systems (DDS) with tailored API release profiles. The size and mass of the produced tablets demonstrated high uniformity. Characterization of the tablets physical properties, such as breaking force (25-39 N) and friability (0.002-0.237%), adhering to Ph. Eur (10th edition). Finally, drug release tests with a phosphate buffer at pH 5.8 showed Paracetamol release depended on the IR- and ER paste materials and their respective compartment size of the composite DDS, which can be readily varied using 3DSP. This work further demonstrates the potential of 3DSP to manufacture complex oral dosage forms exhibiting custom release functionalities for mass production.

Evaluation of Hydroxyethyl Cellulose Grades as the Main Matrix Former to Produce 3D-Printed Controlled-Release Dosage Forms

Diclofenac sodium tablets were successfully prepared via hot-melt extrusion (HME) and fused deposition modeling (FDM), using different molecular-weight (Mw) grades of hydroxyethyl cellulose (HEC) as the main excipient. Hydroxypropyl cellulose (HPC) was added to facilitate HME and to produce drug-loaded, uniform filaments. The effect of the HEC grades (90–1000 kDa) on the processability of HME and FDM was assessed. Mechanical properties of the filaments were evaluated using the three-point bend (3PB) test. Breaking stress and distance were set in relation to the filament feedability to identify printer-specific thresholds that enable proper feeding. The study demonstrated that despite the HEC grade used, all formulations were at least printable. However, only the HEC L formulation was feedable, showing the highest breaking stress (29.40 ± 1.52 MPa) and distance (1.54 ± 0.08 mm). Tablet drug release showed that the release was Mw dependent up to a certain HEC Mw limit (720 kDa). Overall, the release was driven by anomalous transport due to drug diffusion and polymer erosion. The results indicate that despite being underused in FDM, HEC is a suitable main excipient for 3D-printed dosage forms. More research on underutilized polymers in FDM should be encouraged to increase the limited availability.

Reimagining Drug Manufacturing Paradigm in Today’s Pharmacy Landscape

The coronavirus disease 2019 pandemic has escalated the ongoing problem of critical medication shortages, which has serious implications for the health of our patients. Currently, active pharmaceutical ingredients (APIs) are synthesized in large-scale batch operations and shipped to drug product manufacturers, where they are produced on a large scale at centralized facilities. In the centralized drug manufacturing process, the formulation components, operations, and packaging are structured to favor long-term storage and shipment of resultant medicines to the point of care, making this process vulnerable to supply chain disruptions. We propose a rethinking of the drug manufacturing paradigm with an upgraded pharmaceutical compounding-based manufacturing paradigm. This paradigm will be based on integration of continuous manufacturing of APIs and manufacturing of medicines at the point of care with application of machine learning, artificial intelligence, and 3-dimensional printing. This paradigm will support implementation of precision medicine and customization according to patients’ needs. The new model of drug manufacturing will be less dependent on the supply chain while ensuring availability of medicines in a cost-effective manner.