The cyanide degrading nitrilase from Pseudomonas stutzeri AK61 is a two-fold symmetric, 14-subunit spiral

Molecular Modification Strategies of Nitrilase for Its Potential Application in Agriculture

Some feed source plants will produce secondary metabolites such as cyanogenic glycosides during metabolism, which will produce some poisonous nitrile compounds after hydrolysis and remain in plant tissues. The consumption of feed-source plants without proper treatment affect the health of the animals' bodies. Nitrilases can convert nitriles and have been used in industry as green biocatalysts. However, due to their bottleneck problems, their application in agriculture is still facing challenges. Acid-resistant nitrilase preparations, high-temperature resistance, antiprotease activity, strong activity, and strict reaction specificity urgently need to be developed. In this paper, the application potential of nitrilase in agriculture, especially in feed processing industry was explored, the source properties and catalytic mechanism of nitrilase were reviewed, and modification strategies for nitrilase application in agriculture were proposed to provide references for future research and application of nitrilase in agricultural and especially in the biological feed scene.

Genomic Insights into Cyanide Biodegradation in the Pseudomonas Genus

Molecular studies about cyanide biodegradation have been mainly focused on the hydrolytic pathways catalyzed by the cyanide dihydratase CynD or the nitrilase NitC. In some Pseudomonas strains, the assimilation of cyanide has been linked to NitC, such as the cyanotrophic model strain Pseudomonas pseudoalcaligenes CECT 5344, which has been recently reclassified as Pseudomonas oleovorans CECT 5344. In this work, a phylogenomic approach established a more precise taxonomic position of the strain CECT 5344 within the species P. oleovorans. Furthermore, a pan-genomic analysis of P. oleovorans and other species with cyanotrophic strains, such as P. fluorescens and P. monteilii, allowed for the comparison and identification of the cioAB and mqoAB genes involved in cyanide resistance, and the nitC and cynS genes required for the assimilation of cyanide or cyanate, respectively. While cyanide resistance genes presented a high frequency among the analyzed genomes, genes responsible for cyanide or cyanate assimilation were identified in a considerably lower proportion. According to the results obtained in this work, an in silico approach based on a comparative genomic approach can be considered as an agile strategy for the bioprospection of putative cyanotrophic bacteria and for the identification of new genes putatively involved in cyanide biodegradation.

Functional metagenomics uncovers nitrile-hydrolysing enzymes in a coal metagenome

Introduction: Nitriles are the most toxic compounds that can lead to serious human illness through inhalation and consumption due to environmental pollution. Nitrilases can highly degrade nitriles isolated from the natural ecosystem. In the current study, we focused on the discovery of novel nitrilases from a coal metagenome using in silico mining.

Methods: Coal metagenomic DNA was isolated and sequenced on the Illumina platform. Quality reads were assembled using MEGAHIT, and statistics were checked using QUAST. Annotation was performed using the automated tool SqueezeMeta. The annotated amino acid sequences were mined for nitrilase from the unclassified organism. Sequence alignment and phylogenetic analyses were carried out using ClustalW and MEGA11. Conserved regions of the amino acid sequences were identified using InterProScan and NCBI-CDD servers. The physicochemical properties of the amino acids were measured using ExPASy’s ProtParam. Furthermore, NetSurfP was used for 2D structure prediction, while AlphaFold2 in Chimera X 1.4 was used for 3D structure prediction. To check the solvation of the predicted protein, a dynamic simulation was conducted on the WebGRO server. Ligands were extracted from the Protein Data Bank (PDB) for molecular docking upon active site prediction using the CASTp server.

Results and discussion:In silico mining of annotated metagenomic data revealed nitrilase from unclassified Alphaproteobacteria. By using the artificial intelligence program AlphaFold2, the 3D structure was predicted with a per-residue confidence statistic score of about 95.8%, and the stability of the predicted model was verified with molecular dynamics for a 100-ns simulation. Molecular docking analysis determined the binding affinity of a novel nitrilase with nitriles. The binding scores produced by the novel nitrilase were approximately similar to those of the other prokaryotic nitrilase crystal structures, with a deviation of ±0.5.

Recent Progress in the Production of Cyanide-Converting Nitrilases—Comparison with Nitrile-Hydrolyzing Enzymes

Nitrilases have a high potential for application in organic chemistry, environmental technology, and analytics. However, their industrial uses require that they are produced in highly active and robust forms at a reasonable cost. Some organic syntheses catalyzed by nitrilases have already reached a high level of technological readiness. This has been enabled by the large-scale production of recombinant catalysts. Despite some promising small-scale methods being proposed, the production of cyanide-converting nitrilases (cyanide hydratase and cyanide dihydratase) is lagging in this regard. This review focuses on the prospects of cyanide(di)hydratase-based catalysts. The current knowledge of these enzymes is summarized and discussed in terms of the origin and distribution of their sequences, gene expression, structure, assays, purification, immobilization, and uses. Progresses in the production of other nitrilase catalysts are also tackled, as it may inspire the development of the preparation processes of cyanide(di)hydratases.

Genomic Characterization of Bacillus safensis Isolated from Mine Tailings in Peru and Evaluation of Its Cyanide-Degrading Enzyme CynD

Understanding the biochemistry and metabolic pathways of cyanide degradation is necessary to improve the efficacy of cyanide bioremediation processes and industrial requirements. We have isolated and sequenced the genome of a cyanide-degrading Bacillus strain from water in contact with mine tailings from Lima, Peru. This strain was classified as Bacillus safensis based on 16S rRNA gene sequencing and core genome analyses and named B. safensis PER-URP-08. We searched for possible cyanide-degradation enzymes in the genome of this strain and identified a putative cyanide dihydratase (CynD) gene similar to a previously characterized CynD from Bacillus pumilus C1. Sequence analysis of CynD from B. safensis and B. pumilus allow us to identify C-terminal residues that differentiate both CynDs. We then cloned, expressed in Escherichia coli, and purified recombinant CynD from B. safensis PER-URP-08 (CynD_PER-URP-08) and showed that in contrast to CynD from B. pumilus C1, this recombinant CynD remains active at up to pH 9. We also showed that oligomerization of CynD_PER-URP-08 decreases as a function of increased pH. Finally, we demonstrated that transcripts of CynD_PER-URP-08 in B. safensis PER-URP-08 are strongly induced in the presence of cyanide. Our results suggest that the use of B. safensis PER-URP-08 and CynD_PER-URP-08 as potential tool for cyanide bioremediation warrants further investigation. IMPORTANCE Despite being of environmental concern around the world due to its toxicity, cyanide continues to be used in many important industrial processes. Thus, searching for cyanide bioremediation methods is a matter of societal concern and must be present on the political agenda of all governments. Here, we report the isolation, genome sequencing and characterization of cyanide degradation capacity of a bacterial strain isolated from an industrial mining site in Peru. We characterize a cyanide dehydratase (CynD) homolog from one of these bacteria, Bacillus safensis PER-URP-08.

Structures, functions, and mechanisms of filament forming enzymes: a renaissance of enzyme filamentation

Filament formation by non-cytoskeletal enzymes has been known for decades, yet only relatively recently has its wide-spread role in enzyme regulation and biology come to be appreciated. This comprehensive review summarizes what is known for each enzyme confirmed to form filamentous structures in vitro, and for the many that are known only to form large self-assemblies within cells. For some enzymes, studies describing both the in vitro filamentous structures and cellular self-assembly formation are also known and described. Special attention is paid to the detailed structures of each type of enzyme filament, as well as the roles the structures play in enzyme regulation and in biology. Where it is known or hypothesized, the advantages conferred by enzyme filamentation are reviewed. Finally, the similarities, differences, and comparison to the SgrAI endonuclease system are also highlighted.

Cryo-EM and directed evolution reveal how Arabidopsis nitrilase specificity is influenced by its quaternary structure

Nitrilases are helical enzymes that convert nitriles to acids and/or amides. All plants have a nitrilase 4 homolog specific for ß-cyanoalanine, while in some plants neofunctionalization has produced nitrilases with altered specificity. Plant nitrilase substrate size and specificity correlate with helical twist, but molecular details of this relationship are lacking. Here we determine, to our knowledge, the first close-to-atomic resolution (3.4 Å) cryo-EM structure of an active helical nitrilase, the nitrilase 4 from Arabidopsis thaliana. We apply site-saturation mutagenesis directed evolution to three residues (R95, S224, and L169) and generate a mutant with an altered helical twist that accepts substrates not catalyzed by known plant nitrilases. We reveal that a loop between α2 and α3 limits the length of the binding pocket and propose that it shifts position as a function of helical twist. These insights will allow us to start designing nitrilases for chemoenzymatic synthesis.

Substrate specificity of plant nitrilase complexes is affected by their helical twist

Nitrilases are oligomeric, helix-forming enzymes from plants, fungi and bacteria that are involved in the metabolism of various natural and artificial nitriles. These biotechnologically important enzymes are often specific for certain substrates, but directed attempts at modifying their substrate specificities by exchanging binding pocket residues have been largely unsuccessful. Thus, the basis for their selectivity is still unknown. Here we show, based on work with two highly similar nitrilases from the plant Capsella rubella, that modifying nitrilase helical twist, either by exchanging an interface residue or by imposing a different twist, without altering any binding pocket residues, changes substrate preference. We reveal that helical twist and substrate size correlate and when binding pocket residues are exchanged between two nitrilases that show the same twist but different specificities, their specificities change. Based on these findings we propose that helical twist influences the overall size of the binding pocket.

Crystal structure and pH-dependent allosteric regulation of human β-ureidopropionase, an enzyme involved in anticancer drug metabolism

β-Ureidopropionase (βUP) catalyzes the third step of the reductive pyrimidine catabolic pathway responsible for breakdown of uracil-, thymine- and pyrimidine-based antimetabolites such as 5-fluorouracil. Nitrilase-like βUPs use a tetrad of conserved residues (Cys233, Lys196, Glu119 and Glu207) for catalysis and occur in a variety of oligomeric states. Positive co-operativity toward the substrate N-carbamoyl-β-alanine and an oligomerization-dependent mechanism of substrate activation and product inhibition have been reported for the enzymes from some species but not others. Here, the activity of recombinant human βUP is shown to be similarly regulated by substrate and product, but in a pH-dependent manner. Existing as a homodimer at pH 9, the enzyme increasingly associates to form octamers and larger oligomers with decreasing pH. Only at physiological pH is the enzyme responsive to effector binding, with N-carbamoyl-β-alanine causing association to more active higher molecular mass species, and β-alanine dissociation to inactive dimers. The parallel between the pH and ligand-induced effects suggests that protonation state changes play a crucial role in the allosteric regulation mechanism. Disruption of dimer-dimer interfaces by site-directed mutagenesis generated dimeric, inactive enzyme variants. The crystal structure of the T299C variant refined to 2.08 Å resolution revealed high structural conservation between human and fruit fly βUP, and supports the hypothesis that enzyme activation by oligomer assembly involves ordering of loop regions forming the entrance to the active site at the dimer-dimer interface, effectively positioning the catalytically important Glu207 in the active site.

A Cyanide-Induced 3-Cyanoalanine Nitrilase in the Cyanide-Assimilating Bacterium Pseudomonas pseudoalcaligenes Strain CECT 5344

Pseudomonas pseudoalcaligenes CECT 5344 is a bacterium able to assimilate cyanide as a sole nitrogen source. Under this growth condition, a 3-cyanoalanine nitrilase enzymatic activity was induced. This activity was encoded by nit4, one of the four nitrilase genes detected in the genome of this bacterium, and its expression in Escherichia coli enabled the recombinant strain to fully assimilate 3-cyanoalanine. P. pseudoalcaligenes CECT 5344 showed a weak growth level with 3-cyanoalanine as the N source, unless KCN was also added. Moreover, a nit4 knockout mutant of P. pseudoalcaligenes CECT 5344 became severely impaired in its ability to grow with 3-cyanoalanine and cyanide as nitrogen sources. The native enzyme expressed in E. coli was purified up to electrophoretic homogeneity and biochemically characterized. Nit4 seems to be specific for 3-cyanoalanine, and the amount of ammonium derived from the enzymatic activity doubled in the presence of exogenously added asparaginase activity, which demonstrated that the Nit4 enzyme had both 3-cyanoalanine nitrilase and hydratase activities. The nit4 gene is located downstream of the cyanide resistance transcriptional unit containing cio1 genes, whose expression levels are under the positive control of cyanide. Real-time PCR experiments revealed that nit4 expression was also positively regulated by cyanide in both minimal and LB media. These results suggest that this gene cluster including cio1 and nit4 could be involved both in cyanide resistance and in its assimilation by P. pseudoalcaligenes CECT 5344.IMPORTANCE Cyanide is a highly toxic molecule present in some industrial wastes due to its application in several manufacturing processes, such as gold mining and the electroplating industry. The biodegradation of cyanide from contaminated wastes could be an attractive alternative to physicochemical treatment. P. pseudoalcaligenes CECT 5344 is a bacterial strain able to assimilate cyanide under alkaline conditions, thus avoiding its volatilization as HCN. This paper describes and characterizes an enzyme (Nit4) induced by cyanide that is probably involved in cyanide assimilation. The biochemical characterization of Nit4 provides a segment for building a cyanide assimilation pathway in P. pseudoalcaligenes This information could be useful for understanding, and hopefully improving, the mechanisms involved in bacterial cyanide biodegradation and its application in the treatment of cyanide-containing wastes.

Bioengineering of Nitrilases Towards Its Use as Green Catalyst: Applications and Perspectives

Nitrilases are commercial biocatalysts used for the synthesis of plastics, paints, fibers in the chemical industries, pharmaceutical drugs and herbicides for agricultural uses. Nitrilase hydrolyses the nitriles and dinitriles to their corresponding carboxylic acids and ammonia. They have a broad range of substrate specificities as well as enantio-, regio- and chemo-selective properties which make them useful for biotransformation of nitriles to important compounds because of which they are considered as 'Green Catalysts'. Nitriles are widespread in nature and synthesized as a consequence of anthropogenic and biological activities. These are also present in certain plant species and are known to cause environmental pollution. Biotransformation using native organisms as catalysts tends to be insufficient since the enzyme of interest has very low amount in the total cellular protein, rate of reaction is slow along with the instability of enzymes. Therefore, to overcome these limitations, bioengineering offers an alternative approach to alter the properties of enzymes to enhance the applicability and stability. The present review highlights the aspects of producing the recombinant microorganisms and overexpressing the enzyme of interest for the enhanced stability at high temperatures, immobilization techniques, extremes of pH, organic solvents and hydrolysing dintriles to chiral compounds which may enhance the possibilities for creating specific enzymes for biotransformation.

Cyanide bioremediation: the potential of engineered nitrilases

The cyanide-degrading nitrilases are of notable interest for their potential to remediate cyanide contaminated waste streams, especially as generated in the gold mining, pharmaceutical, and electroplating industries. This review provides a brief overview of cyanide remediation in general but with a particular focus on the cyanide-degrading nitrilases. These are of special interest as the hydrolysis reaction does not require secondary substrates or cofactors, making these enzymes particularly good candidates for industrial remediation processes. The genetic approaches that have been used to date for engineering improved enzymes are described; however, recent structural insights provide a promising new approach.

Probing an Interfacial Surface in the Cyanide Dihydratase from Bacillus pumilus, A Spiral Forming Nitrilase

Nitrilases are of significant interest both due to their potential for industrial production of valuable products as well as degradation of hazardous nitrile-containing wastes. All known functional members of the nitrilase superfamily have an underlying dimer structure. The true nitrilases expand upon this basic dimer and form large spiral or helical homo-oligomers. The formation of this larger structure is linked to both the activity and substrate specificity of these nitrilases. The sequences of the spiral nitrilases differ from the non-spiral forming homologs by the presence of two insertion regions. Homology modeling suggests that these regions are responsible for associating the nitrilase dimers into the oligomer. Here we used cysteine scanning across these two regions, in the spiral forming nitrilase cyanide dihydratase from Bacillus pumilus (CynD), to identify residues altering the oligomeric state or activity of the nitrilase. Several mutations were found to cause changes to the size of the oligomer as well as reduction in activity. Additionally one mutation, R67C, caused a partial defect in oligomerization with the accumulation of smaller oligomer variants. These results support the hypothesis that these insertion regions contribute to the unique quaternary structure of the spiral microbial nitrilases.

Probing C-terminal interactions of the Pseudomonas stutzeri cyanide-degrading CynD protein

The cyanide dihydratases from Bacillus pumilus and Pseudomonas stutzeri share high amino acid sequence similarity throughout except for their highly divergent C-termini. However, deletion or exchange of the C-termini had different effects upon each enzyme. Here we extended previous studies and investigated how the C-terminus affects the activity and stability of three nitrilases, the cyanide dihydratases from B. pumilus (CynDpum) and P. stutzeri (CynDstut) and the cyanide hydratase from Neurospora crassa. Enzymes in which the C-terminal residues were deleted decreased in both activity and thermostability with increasing deletion lengths. However, CynDstut was more sensitive to such truncation than the other two enzymes. A domain of the P. stutzeri CynDstut C-terminus not found in the other enzymes, 306GERDST311, was shown to be necessary for functionality and explains the inactivity of the previously described CynDstut-pum hybrid. This suggests that the B. pumilus C-terminus, which lacks this motif, may have specific interactions elsewhere in the protein, preventing it from acting in trans on a heterologous CynD protein. We identify the dimerization interface A-surface region 195-206 (A2) from CynDpum as this interaction site. However, this A2 region did not rescue activity in C-terminally truncated CynDstutΔ302 or enhance the activity of full-length CynDstut and therefore does not act as a general stability motif.

Nitrile-converting enzymes: an eco-friendly tool for industrial biocatalysis

Nitriles are organic compounds bearing a − C ≡ N group; they are frequently known to occur naturally in both fauna and flora and are also synthesized chemically. They have wide applicability in the fields of medicine, industry, and environmental monitoring. However, the majority of nitrile compounds are considered to be lethal, mutagenic, and carcinogenic in nature and are known to cause potential health problems such as nausea, bronchial irritation, respiratory distress, convulsions, coma, and skeletal deformities in humans. Nitrile-converting enzymes, which are extracted from microorganisms, are commonly termed nitrilases and have drawn the attention of researchers all over the world to combat the toxicity of nitrile compounds. The present review focuses on the utility of nitrile-converting enzymes, sources, classification, structure, properties, and applications, as well as the future perspective on nitrilases.

Nitrilases in nitrile biocatalysis: recent progress and forthcoming research

Over the past decades, nitrilases have drawn considerable attention because of their application in nitrile degradation as prominent biocatalysts. Nitrilases are derived from bacteria, filamentous fungi, yeasts, and plants. In-depth investigations on their natural sources function mechanisms, enzyme structure, screening pathways, and biocatalytic properties have been conducted. Moreover, the immobilization, purification, gene cloning and modifications of nitrilase have been dwelt upon. Some nitrilases are used commercially as biofactories for carboxylic acids production, waste treatment, and surface modification. This critical review summarizes the current status of nitrilase research, and discusses a number of challenges and significant attempts in its further development. Nitrilase is a significant and promising biocatalyst for catalytic applications.

Structural and biochemical characterization of a nitrilase from the thermophilic bacterium, Geobacillus pallidus RAPc8

Geobacillus pallidus RAPc8 (NRRL: B-59396) is a moderately thermophilic gram-positive bacterium, originally isolated from Australian lake sediment. The G. pallidus RAPc8 gene encoding an inducible nitrilase was located and cloned using degenerate primers coding for well-conserved nitrilase sequences, coupled with inverse PCR. The nitrilase open reading frame was cloned into an expression plasmid and the expressed recombinant enzyme purified and characterized. The protein had a monomer molecular weight of 35,790 Da, and the purified functional enzyme had an apparent molecular weight of approximately 600 kDa by size exclusion chromatography. Similar to several plant nitrilases and some bacterial nitrilases, the recombinant G. pallidus RAPc8 enzyme produced both acid and amide products from nitrile substrates. The ratios of acid to amide produced from the substrates we tested are significantly different to those reported for other enzymes, and this has implications for our understanding of the mechanism of the nitrilases which may assist with rational design of these enzymes. Electron microscopy and image classification showed complexes having crescent-like, "c-shaped", circular and "figure-8" shapes. Protein models suggested that the various complexes were composed of 6, 8, 10 and 20 subunits, respectively.

Nitrilase enzymes and their role in plant-microbe interactions

Nitrilase enzymes (nitrilases) catalyse the hydrolysis of nitrile compounds to the corresponding carboxylic acid and ammonia, and have a wide range of industrial and biotechnological applications, including the synthesis of industrially important carboxylic acids and bioremediation of cyanide and toxic nitriles. Nitrilases are produced by a wide range of organisms, including plants, bacteria and fungi, but despite their biotechnological importance, the role of these enzymes in living organisms is relatively underexplored. Current research suggests that nitrilases play important roles in a range of biological processes. In the context of plant-microbe interactions they may have roles in hormone synthesis, nutrient assimilation and detoxification of exogenous and endogenous nitriles. Nitrilases are produced by both plant pathogenic and plant growth-promoting microorganisms, and their activities may have a significant impact on the outcome of plant-microbe interactions. In this paper we review current knowledge of the role of nitriles and nitrilases in plants and plant-associated microorganisms, and discuss how greater understanding of the natural functions of nitrilases could be applied to benefit both industry and agriculture.

Primary or secondary? Versatile nitrilases in plant metabolism

The potential of plant nitrilases to convert indole-3-acetonitrile into the plant growth hormone indole-3-acetic acid has earned them the interim title of "key enzyme in auxin biosynthesis". Although not widely recognized, this view has changed considerably in the last few years. Recent work on plant nitrilases has shown them to be involved in the process of cyanide detoxification, in the catabolism of cyanogenic glycosides and presumably in the catabolism of glucosinolates. All plants possess at least one nitrilase that is homologous to the nitrilase 4 isoform of Arabidopsis thaliana. The general function of these nitrilases lies in the process of cyanide detoxification, in which they convert the intermediate detoxification product beta-cyanoalanine into asparagine, aspartic acid and ammonia. Cyanide is a metabolic by-product in biosynthesis of the plant hormone ethylene, but it may also be released from cyanogenic glycosides, which are present in a large number of plants. In Sorghum bicolor, an additional nitrilase isoform has been identified, which can directly use a catabolic intermediate of the cyanogenic glycoside dhurrin, thus enabling the plant to metabolize its cyanogenic glycoside without releasing cyanide. In the Brassicaceae, a family of nitrilases has evolved, the members of which are able to hydrolyze catabolic products of glucosinolates, the predominant secondary metabolites of these plants. Thus, the general theme of nitrilase function in plants is detoxification and nitrogen recycling, since the valuable nitrogen of the nitrile group is recovered in the useful metabolites asparagine or ammonia. Taken together, a picture emerges in which plant nitrilases have versatile functions in plant metabolism, whereas their importance for auxin biosynthesis seems to be minor.

The crystal structure of beta-alanine synthase from Drosophila melanogaster reveals a homooctameric helical turn-like assembly

Beta-alanine synthase (betaAS) is the third enzyme in the reductive pyrimidine catabolic pathway, which is responsible for the breakdown of the nucleotide bases uracil and thymine in higher organisms. It catalyzes the hydrolysis of N-carbamyl-beta-alanine and N-carbamyl-beta-aminoisobutyrate to the corresponding beta-amino acids. betaASs are grouped into two phylogenetically unrelated subfamilies, a general eukaryote one and a fungal one. To reveal the molecular architecture and understand the catalytic mechanism of the general eukaryote betaAS subfamily, we determined the crystal structure of Drosophila melanogaster betaAS to 2.8 A resolution. It shows a homooctameric assembly of the enzyme in the shape of a left-handed helical turn, in which tightly packed dimeric units are related by 2-fold symmetry. Such an assembly would allow formation of higher oligomers by attachment of additional dimers on both ends. The subunit has a nitrilase-like fold and consists of a central beta-sandwich with a layer of alpha-helices packed against both sides. However, the core fold of the nitrilase superfamily enzymes is extended in D. melanogaster betaAS by addition of several secondary structure elements at the N-terminus. The active site can be accessed from the solvent by a narrow channel and contains the triad of catalytic residues (Cys, Glu, and Lys) conserved in nitrilase-like enzymes.

Protein engineering of nitrilase for chemoenzymatic production of glycolic acid

A key step in a chemoenzymatic process for the production of high-purity glycolic acid (GLA) is the enzymatic conversion of glycolonitrile (GLN) to ammonium glycolate using a nitrilase derived from Acidovorax facilis 72W. Protein engineering and over-expression of this nitrilase, combined with optimized fermentation of an E. coli transformant were used to increase the enzyme-specific activity up to 15-fold and the biocatalyst-specific activity up to 125-fold. These improvements enabled achievement of the desired volumetric productivity and biocatalyst productivity for the conversion of GLN to ammonium glycolate.

Evolution of heteromeric nitrilase complexes in Poaceae with new functions in nitrile metabolism

Members of the nitrilase 4 (NIT4) family of higher plants catalyze the conversion of beta-cyanoalanine to aspartic acid and asparagine, a key step in cyanide detoxification. Grasses (Poaceae) possess two different NIT4 homologs (NIT4A and NIT4B), but none of the recombinant Poaceae enzymes analyzed showed activity with beta-cyanoalanine, whereas protein extracts of the same plants clearly posses this activity. Sorghum bicolor contains three NIT4 isoforms SbNIT4A, SbNIT4B1, and SbNIT4B2. Individually, each isoform does not possess enzymatic activity whereas the heteromeric complexes SbNIT4A/B1 and SbNIT4A/B2 hydrolyze beta-cyanoalanine with high activity. In addition, the SbNIT4A/B2 complex accepts additional substrates, the best being 4-hydroxyphenylacetonitrile. Corresponding NIT4A and NIT4B isoforms from other Poaceae species can functionally complement the sorghum isoforms in these complexes. Site-specific mutagenesis of the active site cysteine residue demonstrates that hydrolysis of beta-cyanoalanine is catalyzed by the NIT4A isoform in both complexes whereas hydrolysis of 4-hydroxyphenylacetonitrile occurs at the NIT4B2 isoform. 4-Hydroxyphenylacetonitrile was shown to be an in vitro breakdown product of the cyanogenic glycoside dhurrin, a main constituent in S. bicolor. The results indicate that the SbNIT4A/B2 heterocomplex plays a key role in an endogenous turnover of dhurrin proceeding via 4-hydroxyphenylacetonitrile and thereby avoiding release of toxic hydrogen cyanide. The operation of this pathway would enable plants to use cyanogenic glycosides as transportable and remobilizable nitrogenous storage compounds. Through combinatorial biochemistry and neofunctionalizations, the small family of nitrilases has gained diverse biological functions in nitrile metabolism.

Using a nitrilase for the surface modification of acrylic fibres

The surface of an acrylic fibre was modified with a commercial nitrilase (EC 3.5.5.1). The effect of fibre solvents and polyols on nitrilase catalysis efficiency and stability was investigated. The nitrilase action on the acrylic fabric was improved by the combined addition of 1 M sorbitol and 4% N, N-dimethylacetamide. The colour levels for samples treated with nitrilase increased 156% comparing to the control samples. When the additives were introduced in the treatment media, the colour levels increased 199%. The enzymatic conversion of nitrile groups into the corresponding carboxylic groups, on the fibre surface, was followed by the release of ammonia and polyacrylic acid. A surface erosion phenomenon took place and determined the "oscillatory" behaviour of the amount of dye uptake with time of treatment. These results showed that the outcome of the application of the nitrilase for the acrylic treatment is intimately dependent on reaction media parameters, such as time, enzyme activity and formulation.

Helical structure of unidirectionally shadowed metal replicas of cyanide hydratase from Gloeocercospora sorghi

The helical filaments of the cyanide hydratase from Gloeocercospora sorghi have been reconstructed in three dimensions from freeze dried, unidirectionally shadowed specimens using iterative real-space helical reconstruction. The average power spectrum of all selected images has three clear reflections on different layer lines. The reconstruction is complicated by the fact that three possible indexing schemes are possible and reconstructions using the starting symmetries based on each of these indexing schemes converge on three-dimensional volumes which appear plausible. Because only one side is visible in shadowed specimens, it is necessary to examine the phases from a single filament by cryo-electron microscopy in order to make an unequivocal assignment of the symmetry. Because of the novel nature of the reconstruction method used here, conventional cryo-EM methods were also used to determine a second reconstruction, allowing us to make comparisons between the two. The filament is shown to have a left-handed one-start helix with D(1) symmetry, 5.46 dimers per turn and a pitch of 7.15nm. The reconstruction suggests the presence of an interaction across the groove not previously seen in nitrilase helical fibres.

Protein engineering of Acidovorax facilis 72W nitrilase for bioprocess development

Hydroxycarboxylic acid monomers can be used to prepare industrially important polymers. Enzymatic production of such hydroxycarboxylic acids is often preferred to chemical production since the reactions are run at ambient temperature, do not require strongly acidic or basic reaction conditions, and produce the desired product with high selectivity at high conversion. However, native enzymes often do not perform desired reactions with the efficiency required for commercial applications. Protein engineering was used to significantly increase the specific activity of nitrilase from Acidovorax facilis 72W for the conversion of 3-hydroxyvaleronitrile to 3-hydroxyvaleric acid. Overexpression of engineered nitrilase enzymes in Escherichia coli, combined with immobilization of whole cells in alginate beads that can be recycled many times has facilitated the development of a commercially viable bioprocess for production of 3-hydroxyvaleric acid.

Post-translational cleavage of recombinantly expressed nitrilase from Rhodococcus rhodochrous J1 yields a stable, active helical form

Nitrilases convert nitriles to the corresponding carboxylic acids and ammonia. The nitrilase from Rhodococcus rhodochrous J1 is known to be inactive as a dimer but to become active on oligomerization. The recombinant enzyme undergoes post-translational cleavage at approximately residue 327, resulting in the formation of active, helical homo-oligomers. Determining the 3D structure of these helices using electron microscopy, followed by fitting the stain envelope with a model based on homology with other members of the nitrilase superfamily, enables the interacting surfaces to be identified. This also suggests that the reason for formation of the helices is related to the removal of steric hindrance arising from the 39 C-terminal amino acids from the wild-type protein. The helical form can be generated by expressing only residues 1-327.

ADP_EM: fast exhaustive multi-resolution docking for high-throughput coverage

MOTIVATION

Efficient fitting tools are needed to take advantage of a fast growth of atomic models of protein domains from crystallography or comparative modeling, and low-resolution density maps of larger molecular assemblies. Here, we report a novel fitting algorithm for the exhaustive and fast overlay of partial high-resolution models into a low-resolution density map. The method incorporates a fast rotational search based on spherical harmonics (SH) combined with a simple translational scanning.

RESULTS

This novel combination makes it possible to accurately dock atomic structures into low-resolution electron-density maps in times ranging from seconds to a few minutes. The high-efficiency achieved with simulated and experimental test cases preserves the exhaustiveness needed in these heterogeneous-resolution merging tools. The results demonstrate its efficiency, robustness and high-throughput coverage.

AVAILABILITY

http://sbg.cib.csic.es/Software/ADP_EM.

SUPPLEMENTARY INFORMATION

Supplementary data are available at Bioinformatics online.

The quaternary structure of the amidase from Geobacillus pallidus RAPc8 is revealed by its crystal packing

The amidase from Geobacillus pallidus RAPc8, a moderate thermophile, is a member of the nitrilase enzyme superfamily. It converts amides to the corresponding acids and ammonia and has application as an industrial catalyst. RAPc8 amidase has been cloned and functionally expressed in Escherichia coli and has been purified by heat treatment and a number of chromatographic steps. The enzyme was crystallized using the hanging-drop vapour-diffusion method. Crystals produced in the presence of 1.2 M sodium citrate, 400 mM NaCl, 100 mM sodium acetate pH 5.6 were selected for X-ray diffraction studies. A data set having acceptable statistics to 1.96 A resolution was collected under cryoconditions using an in-house X-ray source. The space group was determined to be primitive cubic P4(2)32, with unit-cell parameter a = 130.49 (+/-0.05) A. The structure was solved by molecular replacement using the backbone of the hypothetical protein PH0642 from Pyrococcus horikoshii (PDB code 1j31) with all non-identical side chains substituted with alanine as a probe. There is one subunit per asymmetric unit. The subunits are packed as trimers of dimers with D3 point-group symmetry around the threefold axis in such a way that the dimer interface seen in the homologues is preserved.

Biology of Pseudomonas stutzeri

Pseudomonas stutzeri is a nonfluorescent denitrifying bacterium widely distributed in the environment, and it has also been isolated as an opportunistic pathogen from humans. Over the past 15 years, much progress has been made in elucidating the taxonomy of this diverse taxonomical group, demonstrating the clonality of its populations. The species has received much attention because of its particular metabolic properties: it has been proposed as a model organism for denitrification studies; many strains have natural transformation properties, making it relevant for study of the transfer of genes in the environment; several strains are able to fix dinitrogen; and others participate in the degradation of pollutants or interact with toxic metals. This review considers the history of the discovery, nomenclatural changes, and early studies, together with the relevant biological and ecological properties, of P. stutzeri.

Bacterial cyanide oxygenase is a suite of enzymes catalyzing the scavenging and adventitious utilization of cyanide as a nitrogenous growth substrate

Cyanide oxygenase (CNO) from Pseudomonas fluorescens NCIMB 11764 catalyzes the pterin-dependent oxygenolytic cleavage of cyanide (CN) to formic acid and ammonia. CNO was resolved into four protein components (P1 to P4), each of which along with a source of pterin cofactor was obligately required for CNO activity. Component P1 was characterized as a multimeric 230-kDa flavoprotein exhibiting the properties of a peroxide-forming NADH oxidase (oxidoreductase) (Nox). P2 consisted of a 49.7-kDa homodimer that showed 100% amino acid identity at its N terminus to NADH peroxidase (Npx) from Enterococcus faecalis. Enzyme assays further confirmed the identities of both Nox and Npx enzymes (specific activity, 1 U/mg). P3 was characterized as a large oligomeric protein (approximately 300 kDa) that exhibited cyanide dihydratase (CynD) activity (specific activity, 100 U/mg). Two polypeptides of 38 kDa and 43 kDa were each detected in the isolated enzyme, the former believed to confer catalytic activity based on its similar size to other CynD enzymes. The amino acid sequence of an internal peptide of the 43-kDa protein was 100% identical to bacterial elongation factor Tu, suggesting a role as a possible chaperone in the assembly of CynD or a multienzyme CNO complex. The remaining P4 component consisted of a 28.9-kDa homodimer and was identified as carbonic anhydrase (specific activity, 2,000 U/mg). While the function of participating pterin and the roles of Nox, Npx, CynD, and CA in the CNO-catalyzed scavenging of CN remain to be determined, this is the first report describing the collective involvement of these four enzymes in the metabolic detoxification and utilization of CN as a bacterial nitrogenous growth substrate.

Comparison of cyanide-degrading nitrilases

Recombinant forms of three cyanide-degrading nitrilases, CynD from Bacillus pumilus C1, CynD from Pseudomonas stutzeri, and CHT from Gloeocercospora sorghi, were prepared after their genes were cloned with C-terminal hexahistidine purification tags and expressed in Escherichia coli, and the enzymes purified using nickel-chelate affinity chromatography. The enzymes were compared with respect to their pH stability, thermostability, metal tolerance, and kinetic constants. The two bacterial genes, both cyanide dihydratases, were similar with respect to pH range, retaining greater than 50% activity between pH 5.2 and pH 8 and kinetic properties, having similar K(m) (6-7 mM) and V(max) (0.1 mmol min(-1) mg(-1)). They also exhibited similar metal tolerances. However, the fungal CHT enzyme had notably higher K(m) (90 mM) and V(max) (4 mmol min(-1) mg(-1)) values. Its pH range was slightly more alkaline (retaining nearly full activity above 8.5), but exhibited a lower thermal tolerance. CHT was less sensitive to Hg(2+) and more sensitive to Pb(2+) than the CynD enzymes. These data describe, in part, the current limits that exist for using nitrilases as agents in the bioremediation of cyanide-containing waste effluent, and may help serve to determine where and under what conditions these nitrilases may be applied.