CO2 promotes penetration and removal of aqueous hydrocarbon surfactant cleaning solutions and silylation in low-k dielectrics with 3nm pores

Surface tensions at elevated pressure depend strongly on bulk phase saturation

HYPOTHESIS

Understanding interfacial phenomena at elevated pressure is crucial to the design of a variety of processes, modeling important systems, and interpreting interfacial thermodynamics. While many previous studies have offered insight into these areas, current techniques have inherent drawbacks that limit equilibrium measurements.

EXPERIMENTS

In this work, we adapt the ambient microtensiometer of Alvarez and co-workers into a high pressure microtensiometer (HPMT) capable of experimentally quantifying a wide range of interfacial phenomena at elevated pressures. Particularly, the HPMT uses a microscale spherical interface pinned to the tip of a capillary to directly measure surface tension via the Laplace equation. The stream of microscale bubbles used to pressurize the system ensures quick saturation of the bulk phases prior to conducting measurements. The HPMT is validated by measuring the surface tension of air-water as a function of pressure. We then measure the surface tension of CO₂ vapor and water as a function of pressure, finding lower equilibrium surface tension values than originally reported in the literature.

FINDINGS

This work both introduces further development of a useful experimental technique for probing interfacial phenomena at elevated pressures and demonstrates the importance of establishing bulk equilibrium to measure surface tension. The true equilibrium state of the CO₂-water surface has a lower tension than previously reported. We hypothesize that this discrepancy is likely due to the long diffusion timescales required to ensure saturation of the bulk fluids using traditional tensiometry. Thus we argue that previously reported elevated pressure measurements were performed at non-equilibrium conditions, putting to rest a long standing discrepancy in the literature. Our measurements establish an equilibrium pressure isotherm for the pure CO₂-water surface that will be essential in analyzing surfactant transport at elevated pressures.

Colloidal interactions in liquid CO2--a dry-cleaning perspective

Liquid CO(2) is a viable alternative for the toxic and environmentally harmful solvents traditionally used in dry-cleaning industry. Although liquid CO(2) dry-cleaning is being applied already at a commercial scale, it is still a relatively young technique which poses many challenges. The focus of this review is on the causes of the existing problems and directions to solve them. After presenting an overview of the state-of-the-art, we analyze the detergency challenges from the fundamentals of colloid and interface science. The properties of liquid CO(2) such as dielectric constant, density, Hamaker constant, refractive index, viscosity and surface tension are presented and in the subsequent chapters their effects on CO(2) dry-cleaning operation are delineated. We show, based on theory, that the van der Waals forces between a model soil (silica) and model fabric (cellulose) through liquid CO(2) are much stronger compared to those across water or the traditional dry-cleaning solvent PERC (perchloroethylene). Prevention of soil particle redeposition in liquid CO(2) by electrostatic stabilization is challenging and the possibility of using electrolytes having large anionic parts is discussed. Furthermore, the role of different additives used in dry-cleaning, such as water, alcohol and surfactants, is reviewed. Water is not only used as an aid to remove polar soils, but also enhances adhesion between fabric and soil by forming capillary bridges. Its role as a minor component in liquid CO(2) is complex as it depends on many factors, such as the chemical nature of fabrics and soil, and also on the state of water itself, whether present as molecular solution in liquid CO(2) or phase separated droplets. The phenomena of wicking and wetting in liquid CO(2) systems are predicted from the Washburn-Lucas equation for fabrics of various surface energies and pore sizes. It is shown that nearly complete wetting is desirable for good detergency. The effect of mechanical action and fluid dynamic conditions on dry-cleaning is analyzed theoretically. From this it follows that in liquid CO(2) an order of magnitude higher Reynold's number is required to exceed the binding forces between fabric and soil as opposed to PERC or water, mainly due to the strong van der Waals forces and the low viscosity of CO(2) at dry-cleaning operational conditions.

Contact angle of water on polystyrene thin films: effects of CO(2) environment and film thickness

We examine the contact angle of water droplets on polystyrene (PS) thin films of varying thicknesses supported by silicon wafers under both air and pressurized carbon dioxide (CO2) environments. At 23 degrees C, the contact angle is found to increase upon increasing CO2 pressure in the vapor regime and then levels off in the liquid CO2 regime. A macroscopic model based on Young's equation and the geometric-mean method for interfacial tensions, and long-range van der Waals interactions, correctly predicts the trends and the magnitude of the contact angle dependence on pressure, although deviations occur at high CO2 activities. The contact angle was also found to depend on film thickness, h, when h was comparable to or smaller than 50 nm. Specifically, the contact angle decreases with decreasing PS film thickness. This behavior could be accounted for with the use of a model that incorporates the effects of film thickness, CO2 pressure, and the long-range van der Waals potential.