Carbon dioxide infusion of composite electrospun fibers for tissue engineering

Sintered electrospun polycaprolactone for controlled model drug delivery

Electrospinning has been used widely for drug delivery applications due to its versatility and ease of modification of spun fiber properties. Net drug loading and release is typically limited by the inherent surface-area of the sample. In a relatively novel approach, sintering of electrospun fiber was used to create a capsule favoring long-term delivery. We showed that electrospun polycaprolactone (PCL) retained its initial morphology out to 1042 days of in vitro exposure, illustrating its potential for extended performance. Sintering decreased the electrospun pore size by 10- and 28-fold following 56 and 57 °C exposures, respectively. At 58 and 59 °C, the PCL capsules lost all apparent surface porosity, but entrapped pores were observed in the 58 °C cross-section. The use of Rhodamine B (RhB, 479.02 g mol^-1), Rose Bengal (RB, 1017.64 g mol^-1) and albumin-fluorescein isothiocyanate conjugate from bovine serum (BSA-FITC, ~66,000 g mol^-1) as model compounds demonstrated that release (RhB > RB ≫ BSA-FITC) is controlled both by molecular weight and available porosity. Interestingly, the ranking of release following sintering was 57 > 56 > 59 > 58 °C; COMSOL simulations explored the effects of capsule wall thickness and porosity on release rate. It was hypothesized that model drug adsorption on the available fiber surface-area (57 versus 56 °C) and entrapped porosity (59 versus 58 °C) could have also attributed to the observed ranking of release rates. While the 56 and 57 °C exposures allowed the bulk of the release to occur in <1 day, the capsules sintered at 58 and 59 °C exhibited release that continued after 12 days of exposure.

CO2 SOLUBILITY AND DIFFUSIVITY AND RAPID GAS DECOMPRESSION RESISTANCE OF ELASTOMERS CONTAINING CNT

Understanding the structure–property relationship of elastomers is of critical importance in developing next-generation elastomers for high-pressure, high-temperature (HPHT) applications and in extending the application temperature and pressure range of existing oilfield products. Gas dissolution and diffusion in elastomers are essential to understanding the relationship among elastomer structures, rapid gas decompression (RGD) resistance, and sealing performance. Solubility and diffusivity (or diffusion efficiency) of carbon dioxide (CO2) in hydrogenated nitrile butadiene rubber (HNBR) and fluoroelastomers (FKM) comprising carbon nanotubes (CNT) were measured using a gravimetric method. The Rubotherm method was also used to estimate the solubility and swelling of HNBR in both subcritical liquid and supercritical CO2. It was demonstrated that CNT had a direct impact on CO2 solubility, diffusion, and mechanical properties of elastomers, hence improving the RGD resistance of the elastomers.

Understanding drug release from PCL/gelatin electrospun blends

Electrospinning is one of the efficient processes to fabricate polymeric fibrous scaffolds for several biomedical applications. Several studies have published to demonstrate drug release from electrospun scaffolds. Blends of natural and synthetic electrospun fibers provide excellent platform to combine mechanical and bioactive properties. Drug release from polymer blends is a complex process. Drug release from polymer can be dominated by one or more of following mechanisms: polymer erosion, relaxation, and degradation. In this study, electrospun polycaprolactone (PCL)–gelatin blends are investigated to understand release mechanism of Rhodamine B dye. Also, this article summarizes the effect of high-pressure carbon dioxide on drug loading and release from PCL–gelatin fibers. Results indicate that release media diffusion is a dominant mechanism for PCL–gelatin electrospun fibers. Thickness of electrospun mat becomes critical for blends with gelatin. As gelatin is highly soluble in water and has tendency of gelation, it affects diffusion of release media in and out of scaffold. This article is a key step forward in understanding release from electrospun blends.

Media-based effects on the hydrolytic degradation and crystallization of electrospun synthetic-biologic blends

Tissue engineering scaffold degradation in aqueous environments is a widely recognized factor determining the fate of the associated anchorage-dependent cells. Electrospun blends of synthetic polycaprolactone (PCL) and a biological polymer, gelatin, of 25, 50, and 75 wt% were investigated for alterations in crystallinity, microstructure and morphology following widely used in vitro biological exposures. To our knowledge, the effects of these different aqueous-based biological media compositions on the degradation of these blends have never been directly compared. X-ray diffraction (XRD) analysis exposed that differences in PCL crystallinity were observed following exposures to phosphate buffered solution (PBS), Dulbecco's modified eagle medium (DMEM) cell culture media, and DI water following 7 days of exposure at 37 °C. XRD data suggested that in vitro medium exposures aid in providing chain mobility and rearrangement due to hydrolytic degradation of the gelatin phase, allowing previously constrained, poorly crystalline PCL regions to achieve more intense reflections resulting in the presence of crystalline peaks. The dry, as-spun modulus of relatively soft 100 % PCL fibers was approximately 10 % of any gelatin-containing composition. Tensile testing results indicate that hydrated gelatin containing scaffolds on average had a fivefold increase in elongation compared to as-spun scaffolds. After 24-h of aqueous exposure, the elastic modulus decreased in proportion to increasing gelatin content. After 1 day of exposure, the 75 and 100 % gelatin compositions largely ceased to display measurable values of modulus, elongation or tensile strength due to considerable hydrolytic degradation. On a relative basis, common aqueous in vitro medium exposures (deionized water, PBS, and DMEM) resulted in significantly divergent amounts of crystalline PCL, overall microstructure and fiber morphology in the blended compositions, subsequently 'shielding' scaffolds from significant changes in mechanical properties after 24-h of exposure. Understanding electrospun PCL-gelatin scaffold dynamics in different aqueous-based cell culture medias enables the ability to tailor scaffold composition to 'tune' degradation rate, microstructure, and long-term mechanical stability for optimal cellular growth, proliferation, and maturation.