Production of submicron particles of the antioxidants of mango leaves/PVP by supercritical antisolvent extraction process

PVP/aprepitant microcapsules produced by supercritical antisolvent process

The supercritical antisolvent (SAS) process was a green alternative to improve the low bioavailability of insoluble drugs. However, it is difficult for SAS process to industrialize with limited production capacity. A coaxial annular nozzle was used to prepare the microcapsules of aprepitant (APR) and polyvinylpyrrolidone (PVP) by SAS with N, N-Dimethylformamide (DMF) as solvent. Meanwhile, the effects of polymer/drug ratio, operating pressure, operating temperature and overall concentration on particles morphology, mean particle diameter and size distribution were analyzed. Microcapsules with mean diameters ranging from 2.04 μm and 9.84 μm were successfully produced. The morphology, particle size, thermal behavior, crystallinity, drug content, drug dissolution and residual amount of DMF of samples were analyzed. The results revealed that the APR drug dissolution of the microcapsules by SAS process was faster than the unprocessed APR. Furthermore, the drug powder collected every hour is in the kilogram level, verifying the possibility to scale up the production of pharmaceuticals employing the SAS process from an industrial point of view.

Blending of the Thermodynamically Incompatible Polyvinyl Chloride and High-Pressure Polyethylene Polymers Using a Supercritical Fluid Anti-Solvent Method (SEDS) Dispersion Process

The experimental solubility data of polyvinyl chloride (PVC) and high-pressure polyethylene (HPPE) in organic solvents (toluene, dichloromethane, and chloroform) at temperatures ranging from 308.15 to 373.15 K at atmospheric pressure are reported in the present paper. The solubility of the polymers (PVC and HPPE) in organic solvents (toluene, dichloromethane, and chloroform) was studied at temperatures between 298 and 373 K. The supercritical SEDS dispersion of PVC and HPPE polymer blends at pressures between 8.0 and 25 MPa and at temperatures from 313 to 333 K are reported in the present work. The kinetics of crystallization and phase transformation in polymer blends obtained by blending in a melt, and using the supercritical SEDS method, have been studied. The effect of the HPPE/PVC ratio on the thermal and mechanical characteristics of the polymer blends has been studied. For all studied polymer blends and pure polymers obtained using the SEDS method, the heat of fusion Δ_fusH exceeds the values obtained by blending in the melt by 1.5 to 5) times. The heat of fusion of the obtained polymer blends is higher than the additive value; therefore, the degree of crystallinity is higher, and this effect persists after heat treatment. The relative elongation decreases for all polymer blends, but their tensile strength increases significantly.

Particle preparation of pharmaceutical compounds using supercritical antisolvent process: current status and future perspectives

The low aqueous solubility and subsequently slow dissolution rate, as well as the poor bioavailability of several active pharmaceutical ingredients (APIs), are major challenges in the pharmaceutical industry. In this review, the particle engineering approaches using supercritical carbon dioxide (SC CO₂) as an antisolvent are critically reviewed. The different SC CO₂-based antisolvent processes, such as the gas antisolvent process (GAS), supercritical antisolvent process (SAS), and a solution-enhanced dispersion system (SEDS), are described. The effect of process parameters such as temperature, pressure, solute concentration, nozzle diameter, SC CO₂ flow rate, solvent type, and solution flow rate on the average particle size, particle size distribution, and particle morphology is discussed from the fundamental perspective of the SAS process. The applications of the SAS process in different formulation approaches such as solid dispersion, polymorphs, cocrystallization, inclusion complexation, and encapsulation to enhance the dissolution rate, solubility, and bioavailability are critically reviewed. This review highlights some areas where the SAS process has not been adequately explored yet. This review will be helpful to researchers working in this area or planning to explore SAS process to particle engineering approaches to tackle the challenge of low solubility and subsequently slow dissolution rate and poor bioavailability.

Development of mangiferin loaded chitosan-silica hybrid scaffolds: Physicochemical and bioactivity characterization

Development of hybrid materials with molecular structure of organic-inorganic co-network is a promising method to enhance the stability and mechanical properties of biopolymers. Chitosan-silica hybrid nanocomposite scaffolds loaded with mangiferin, a plant-derived active compound possessing several bioactivities, were fabricated using the sol-gel synthesis and the freeze-drying processes. Investigation on the physicochemical and mechanical properties of the fabricated scaffolds showed that their properties can be improved and tailored by the formation of 3-dimensional crosslinked network and the addition of ZnO nanoparticles. The scaffolds possessed porosity, fluid uptake, morphology, thermal properties and mechanical strength suitable for bone tissue engineering application. Investigation on the biomineralization and cell viability indicated that the inclusion of bioactive mangiferin further promote potential use of the hybrid nanocomposite scaffolds in guided bone regeneration application.

Repositioning Natural Antioxidants for Therapeutic Applications in Tissue Engineering

Although a large panel of natural antioxidants demonstrate a protective effect in preventing cellular oxidative stress, their low bioavailability limits therapeutic activity at the targeted injury site. The importance to deliver drug or cells into oxidative microenvironments can be realized with the development of biocompatible redox-modulating materials. The incorporation of antioxidant compounds within implanted biomaterials should be able to retain the antioxidant activity, while also allowing graft survival and tissue recovery. This review summarizes the recent literature reporting the combined role of natural antioxidants with biomaterials. Our review highlights how such functionalization is a promising strategy in tissue engineering to improve the engraftment and promote tissue healing or regeneration.

Recent Advances in Polymer Nanomaterials for Drug Delivery of Adjuvants in Colorectal Cancer Treatment: A Scientific-Technological Analysis and Review

Colorectal cancer (CRC) is the type with the second highest morbidity. Recently, a great number of bioactive compounds and encapsulation techniques have been developed. Thus, this paper aims to review the drug delivery strategies for chemotherapy adjuvant treatments for CRC, including an initial scientific-technological analysis of the papers and patents related to cancer, CRC, and adjuvant treatments. For 2018, a total of 167,366 cancer-related papers and 306,240 patents were found. Adjuvant treatments represented 39.3% of the total CRC patents, indicating the importance of adjuvants in the prognosis of patients. Chemotherapy adjuvants can be divided into two groups, natural and synthetic (5-fluorouracil and derivatives). Both groups can be encapsulated using polymers. Polymer-based drug delivery systems can be classified according to polymer nature. From those, anionic polymers have garnered the most attention, because they are pH responsive. The use of polymers tailors the desorption profile, improving drug bioavailability and enhancing the local treatment of CRC via oral administration. Finally, it can be concluded that antioxidants are emerging compounds that can complement today's chemotherapy treatments. In the long term, encapsulated antioxidants will replace synthetic drugs and will play an important role in curing CRC.

Preparation and in vitro release kinetics of nitrendipine-loaded PLLA–PEG–PLLA microparticles by supercritical solution impregnation process

In this work, drug-loaded polymer microparticles were prepared by a supercritical solution impregnation (SSI) process with nitrendipine as the model drug and PLLA–PEG–PLLA as the drug carrier. The morphology, size, distribution and functional groups of the drug-loaded microparticles were characterized by scanning electron microscopy (SEM), laser particle size analyzer and fourier transform infrared analysis (FTIR). The effects of pressure, temperature and cosolvent concentration on the drug loading and release property of the microparticles prepared with and without cosolvent were investigated. The in vitro drug release kinetics of drug-loaded microparticles was studied with five models. The results indicated that the morphology of the drug-loaded polymer microparticles was not influenced by the SSI process. And the addition of ethanol cosolvent could significantly improve the drug loading of the microparticles. The most satisfied drug loading and the release properties of the microparticles were achieved under 55 °C, 13 MPa and cosolvent ethanol concentration of 3%. The drug could be released for more than 140 h. The analysis of the drug release kinetics showed that the experimental data fitted with Ritger–Peppas model were optimal. According to the release exponent value, the in vitro release process of the nitrendipine-loaded microparticles was controlled by Fickian diffusion, which can provides a theoretical basis for drug release of this type of experiment.

In this work, drug-loaded polymer microparticles were prepared by a supercritical solution impregnation (SSI) process with nitrendipine as the model drug and PLLA–PEG–PLLA as the drug carrier.