Recovery of bioactive compounds from beetroot leaves by supercritical CO2 extraction as a promising bioresource

Extraction Process Optimization of Curcumin from Curcuma xanthorrhiza Roxb. with Supercritical Carbon Dioxide Using Ethanol as a Cosolvent

Curcuma xanthorrhiza Roxb., known as temulawak, Javanese ginger, or Javanese turmeric, is a plant species belonging to the ginger family. This plant originated in Indonesia, more specifically on Java Island, and is usually used as medicine. It contains a high amount of a phenolic compound, namely, curcumin. A supercritical carbon dioxide extraction technique was employed to extract curcumin from C. xanthorrhiza. The objective of this work was to investigate the effects of temperature, pressure, and CO2 flow rate on the extraction yield and curcumin recovery from C. xanthorrhiza, which was extracted using supercritical carbon dioxide and ethanol as a cosolvent. The Box-Behnken design (BBD) experimental design and response surface methodology were used to optimize the extraction yield and curcumin recovery. The extraction conditions at a temperature of 40 °C, a pressure of 25 MPa, and a CO2 flow rate of 5.34 mL/min produced the optimum extraction yield of 10.4% and curcumin recovery of 3.2%. From Fourier transform infrared analysis, although the physical-chemical structure in the residue of the starting material was almost similar, the quantity of all functional groups in the residue decreased from the starting material. From scanning electron microscopy analysis, it was confirmed that the cell was broken due to the high-pressure effect, so that the extraction process runs easily.

Chlorophylls as Natural Bioactive Compounds Existing in Food By-Products: A Critical Review

Chlorophylls are a group of naturally occurring pigments that are responsible for the green color in plants. This pigment group could have numerous health benefits due to its high antioxidant activity, including anti-inflammatory, anti-cancer, and anti-obesity properties. Many food by-products contain a high level of chlorophyll content. These by-products are discarded and considered environmental pollutants if not used as a source of bioactive compounds. The recovery of chlorophylls from food by-products is an interesting approach for increasing the sustainability of food production. This paper provides insight into the properties of chlorophylls and the effect of different treatments on their stability, and then reviews the latest research on the extraction of chlorophylls from a sustainable perspective.

Multiobjective response and chemometric approaches to enhance the phytochemicals and biological activities of beetroot leaves: an unexploited organic waste

Research on medicinal plants is developing each day due to inborn phytochemicals, which can encourage the progress of novel drugs. Most plant-based phytochemicals have valuable effects on well-being. Among them, beetroot leaves (BL) are known for their therapeutic properties. Here, three solvents, namely, acetonitrile, ethanol, and water, and their combinations were developed for BL extraction and simultaneous assessment of phytochemical compounds and antioxidant and antifoodborne pathogen bacteria activities. By using the augmented simplex-centroid mixture design, 40.40% acetonitrile diluted in water at 38.74% and ethanol at 20.86% favored the recovery of 49.28 mg GAE/mL (total phenolic content (TPC)) and 0.314 mg QE/mL (total flavonoid content (TFC)), respectively. Acetonitrile diluted in water at 50% guarantees the best antioxidant activity, whereas the optimal predicted mixture for the highest antibacterial activity matches 24.58, 50.17, and 25.25% of acetonitrile, ethanol, and water, respectively. These extraction conditions ensured inhibition of Staphylococcus aureus, Salmonella enterica, and Escherichia coli, respectively, at 0.402, 0.497, and 0.207 mg/mL. Under optimized conditions, at three concentrations of BL, minimal inhibitory concentration (MIC), 2 × MIC, and 4 × MIC, a linear model was employed to investigate the inhibition behavior against the three tested bacteria. The early logarithmic growth phase of these bacteria illustrated the bactericidal effect of optimized extracted BL with a logarithmic growth phase inferior to 6 h. Therefore, BL extract at 4 × MIC, which corresponds to 1.608, 1.988, and 0.828 mg/mL, was more efficient against S. aureus, S. enterica, and E. coli.

Impact of Sample Pretreatment and Extraction Methods on the Bioactive Compounds of Sugar Beet (Beta vulgaris L.) Leaves

To find the most optimal green valorization process of food by-products, sugar beet (Beta vulgaris L.) leaves (SBLs) were freeze-dried and ground with/without liquid nitrogen (LN), as a simple sample pretreatment method, before ultrasound-assisted extraction (UAE) of polyphenols. First, the water activity, proximate composition, amino acid (AA) and fatty acid (FA) profiles, and polyphenol oxidase (PPO) activity of dried and fresh SBLs were evaluated. Then, conventional extraction (CE) and UAE of polyphenols from SBLs using water/EtOH:water 14:6 (v/v) as extracting solvents were performed to determine the individual and combined effects of the sample preparation method and UAE. In all the freeze-dried samples, the specific activity of PPO decreased significantly (p ≤ 0.05). Freeze-drying significantly increased (p ≤ 0.05) the fiber and essential FA contents of SBLs. The FA profile of SBLs revealed that they are rich sources of oleic, linoleic, and α-linolenic acids. Although freeze-drying changed the contents of most AAs insignificantly, lysine increased significantly from 7.06 ± 0.46% to 8.32 ± 0.38%. The aqueous UAE of the freeze-dried samples without LN pretreatment yielded the most optimal total phenolic content (TPC) (69.44 ± 0.15 mg gallic acid equivalent/g dry matter (mg GAE/g DM)) and excellent antioxidant activities. Thus, combining freeze-drying with the aqueous UAE method could be proposed as a sustainable strategy for extracting bioactive compounds from food by-products.

Promising Green Technology in Obtaining Functional Plant Preparations: Combined Enzyme-Assisted Supercritical Fluid Extraction of Flavonoids Isolation from Medicago Sativa Leaves

To elaborate a complete extraction protocol for the enhanced release of biologically active compounds from plant cells, this study aimed to optimize together the parameters of the supercritical fluid extraction (SFE) process (temperature, pressure, and percentage of cosolvent) and enzymatic treatment of plant material (pH, enzyme concentration, time, and temperature) by response surface methodology (RSM). Medicago sativa L. was selected as a plant material due to its richness in phenolics and flavonoids. HPLC-MS/MS analysis allowed evaluating the content of individual bioactive compounds in obtained extracts. The total content of polyphenolic compounds in the extract obtained after two-step optimization was much higher (546 ± 21 µg/g) than in the extract obtained from non-hydrolyzed material (275 ± 23 µg/g) and in the extract obtained by maceration (162 ± 20 µg/g). Furthermore, it was evidenced that extract with the highest content of polyphenolic compounds can support the cellular antioxidant system both as a free radical scavenger and by stimulating the antioxidant enzyme system.

Supercritical carbon dioxide extraction of plant phytochemicals for biological and environmental applications - A review

Recently, supercritical fluid CO₂ extraction (SFE) has emerged as a promising and pervasive technology over conventional extraction techniques for various applications, especially for bioactive compounds extraction and environmental pollutants removal. In this context, temperature and pressure regulate the solvent density and thereby effects the yield, selectivity, and biological/therapeutic properties of the extracted components. However, the nature of plant matrices primarily determines the extraction mechanism based on either density or vapor pressure. The present review aims to cover the recent research and developments of SFE technique in the extraction of bioactive plant phytochemicals with high antioxidant, antibacterial, antimalarial, and anti-inflammatory activities, influencing parameters, process conditions, the investigations for improving the yield and selectivity. In another portion of this review focuses on the ecotoxicology and toxic metal recovery applications. Nonpolar properties of Sc-CO₂ create strong solvent strength via distinct intermolecular interaction forces with micro-pollutants and toxic metal complexes. This results in efficient removal of these contaminants and makes SFE technology as a superior alternative for conventional solvent-based treatment methods. Moreover, a compelling assessment on the therapeutic, functional, and solvent properties of SFE is rarely focused, and hence this review would add significant value to the SFE based research studies. Furthermore, we mention the limitations and potential of future perspectives related to SFE applications.

Long-chain alkanol–alkyl carboxylic acid-based low-viscosity hydrophobic deep eutectic solvents for one-pot extraction of anthraquinones from Rhei Radix et Rhizoma

Natural long-chain alkanol and alkyl carboxylic acid were used to prepare novel hydrophobic deep eutectic solvents (HDESs). These HDESs are liquid at room temperature and have low viscosity (<12.26 mPa‧s), low polarity (lower than that of methanol, ChCl-based deep eutectic solvents and other reported HDESs), and low density (<0.928 g/mL). A simple one-pot method based on a novel HDES–water two-phase extraction system was constructed for the extraction of weak-polarity bioactive components, anthraquinones, from Rhei Radix et Rhizoma. This HDES-based new extraction method does not consume hazardous organic solvents and can obtain a total anthraquinone yield of 21.52 mg/g, which is close to that obtained by the Chinese pharmacopoeia method (21.22 mg/g) and considerably higher than those by other reported HDESs-based extraction methods (14.20–20.09 mg/g, p < 0.01). The high extraction yield can be mainly attributed to the severe destruction of the RRR cell walls by the extraction system and the excellent dissolving ability of novel HDESs for anthraquinones.

•

Novel long-chain alkanol-alkyl carboxylic acid-based hydrophobic DESs were designed.

•

These DESs show the feature of low-viscosity and low-polarity.

•

A one-pot extraction method based on DES-water two-phase system was newly established.

•

This method can efficiently extract anthraquinones from Rhei Radix et Rhizoma.

•

No organic solvents were consumed in this method.

Environmentally Friendly Methods for Flavonoid Extraction from Plant Material: Impact of Their Operating Conditions on Yield and Antioxidant Properties

The flavonoids are compounds synthesized by plants, and they have properties such as antioxidant, anticancer, anti-inflammatory, and antibacterial, among others. One of the most important bioactive properties of flavonoids is their antioxidant effect. Synthetic antioxidants have side toxic effects whilst natural antioxidants, such as flavonoids from natural sources, have relatively low toxicity. Therefore, it is important to incorporate flavonoids derived from natural sources in several products such as foods, cosmetics, and drugs. For this reason, there is currently a need to extract flavonoids from plant resources. In this review are described the most important parameters involved in the extraction of flavonoids by unconventional methods such as ultrasound, pressurized liquid extraction, mechanochemical, high hydrostatic pressure, supercritical fluid, negative pressure cavitation, intensification of vaporization by decompression to the vacuum, microwave, infrared, pulsed electric field, high-voltage electrical discharges, and enzyme-assisted extraction. There are no unified operation conditions to achieve high yields and purity. Notwithstanding, progress has been achieved in the development of more advanced and environmentally friendly methods of extraction. Although in literature are found important advances, a complete understanding of the extraction process in each of the unconventional techniques is needed to determine the thermodynamic and kinetic mechanisms that govern each of the techniques.