Comparison of the toxicity of sintered and unsintered indium-tin oxide particles in murine macrophage and epidermal cells

Facile indium recovery from waste liquid crystal displays: Chloride-facilitated indium electroreduction and stepwise Cu/MoO2 and indium electrodeposition

With a huge amount of waste liquid crystal displays (LCDs) generated annually, their proper recycling raises continuous concern to realize pollution control (heavy metal and liquid crystal) and resource recovery (indium). However, due to their multi-metal feature, traditional hydrometallurgy lacks of sufficient selectivity, which makes the recycling route lengthy, costly, and generate more waste. Electrodeposition acts as a promising technique for selective metal extraction from multi-metal system due to its high selectivity and electron as clean reagent. To fully develop its application in metal recovery, stepwise Cu/MoO₂ and In electrodeposition from In-Cu-Mo-Fe waste LCD leachate is explored in depth. Electrochemical behavior analysis shows Cu and MoO₂ can be first electrodeposited for their higher electroreduction potential. Cl^- plays a key role in accelerating indium electroreduction kinetics, which largely shortens the extraction time without the sacrifice of current efficiency. This accelerating effect is attributed to the increased concentration of electroactive species or collision frequency. Under optimized condition, 99.41% of indium (> 99% purity) can be electrodeposited within 13 h with high current efficiency. This study provides a cleaner approach for waste LCDs recycling and gives implications for the potential application of electrochemical technique in e-waste recycling.

Kouzani A, Mosadegh B, Gharaie S. Blood Pressure Sensors: Materials, Fabrication Methods, Performance Evaluations and Future Perspectives

Advancements in materials science and fabrication techniques have contributed to the significant growing attention to a wide variety of sensors for digital healthcare. While the progress in this area is tremendously impressive, few wearable sensors with the capability of real-time blood pressure monitoring are approved for clinical use. One of the key obstacles in the further development of wearable sensors for medical applications is the lack of comprehensive technical evaluation of sensor materials against the expected clinical performance. Here, we present an extensive review and critical analysis of various materials applied in the design and fabrication of wearable sensors. In our unique transdisciplinary approach, we studied the fundamentals of blood pressure and examined its measuring modalities while focusing on their clinical use and sensing principles to identify material functionalities. Then, we carefully reviewed various categories of functional materials utilized in sensor building blocks allowing for comparative analysis of the performance of a wide range of materials throughout the sensor operational-life cycle. Not only this provides essential data to enhance the materials' properties and optimize their performance, but also, it highlights new perspectives and provides suggestions to develop the next generation pressure sensors for clinical use.

In vitro toxicity assessment of respirable solid surface composite sawing particles

Solid surface composites (SSCs) are a class of popular construction materials composed of aluminum trihydrate and acrylic polymers. Previous investigations have demonstrated that sawing SSC releases substantial airborne dusts, with a number-based geometric mean diameter of 1.05 µm. We reported that in mice, aspiration exposure to airborne SSC dusts induced symptoms of pulmonary inflammation at 24-h postexposure: neutrophilic influx, alveolitis, and increased lactate dehydrogenase (LDH) and pro-inflammatory cytokine levels in lavage fluid. The particles appeared to be poorly cleared, with 81% remaining at 14-day postexposure. The objective of this study was to determine the toxicity specifically of respirable particles on a model of human alveolar macrophages (THP-1). The relative toxicities of subfractions (0.07, 0.66, 1.58, 5.0, and 13.42 µm diameter) of the airborne particles were also determined. THP-1 macrophages were exposed for 24 h to respirable particles from sawing SSC (0, 12.5, 25, 50, or 100 µg/ml) or size-specific fractions (100 µg/ml). Exposure to respirable SSC particles induced THP-1 macrophage toxicity in a dose-dependent manner. Viability was decreased by 15% and 19% after exposure to 50 and 100 µg/ml SSC, respectively, which correlated with increased cell culture supernatant LDH activity by 40% and 70% when compared to control. Reactive oxygen species (ROS) production and inflammatory cytokines were increased in a dose-dependent manner. A size-dependent cytotoxic effect was observed in the cells exposed to subfractions of SSC particles. SSC particles of 0.07, 0.66, and 1.58 µm diameter killed 36%, 17%, and 22% of cells, respectively. These results indicate a potential for cytotoxicity of respirable SSC particles and a relationship between particle size and toxicity, with the smallest fractions appearing to exhibit the greatest toxicity.

Evaluation of cytotoxicity, apoptosis, and genotoxicity induced by indium chloride in macrophages through mitochondrial dysfunction and reactive oxygen species generation

Due to rapid advances in the era of electronic technologies, indium has played the important material for the production of liquid crystal display screens in the semiconductor and optoelectronic industries. The present study focuses on evaluating the toxic effects and related mechanisms of indium chloride (InCl₃) on RAW264.7 macrophages. Cytotoxicity was induced by InCl₃ in a concentration- and time-dependent manner. InCl₃ had the ability to induce macrophage death through apoptosis rather than through necrosis. According to the cytokinesis-block micronucleus assay and alkaline single-cell gel electrophoresis assay, InCl₃ induced DNA damage, also called genotoxicity, in a concentration-dependent manner. Cysteine-dependent aspartate-directed protease (caspase)-3, -8, and -9 were activated by InCl₃ in a concentration-dependent manner. Mitochondria dysfunction and cytochrome c release from the mitochondria were induced by InCl₃ in a concentration-dependent manner. Downregulation of BCL2 and upregulation of BAD were induced by InCl₃ in a concentration-dependent manner. More, we proposed that InCl₃ treatment generated reactive oxygen species (ROS) in a concentration-dependent manner. In conclusion, the current study revealed that InCl₃ induced macrophage cytotoxicity, apoptosis, and genotoxicity via a mitochondria-dependent apoptotic pathway and ROS generation.

Anticandidal and In vitro Anti-Proliferative Activity of Sonochemically synthesized Indium Tin Oxide Nanoparticles

The present work demonstrates the synthesis, characterization and biological activities of different concentrations of tin doped indium oxide nanoparticles (Sn doped In2O3 NPs), i.e., (Sn/In = 5%, 10% and 15%). We have synthesized different size (38.11 nm, 18.46 nm and 10.21 nm) of Sn doped In2O3 NPs. by using an ultra-sonication process. The Sn doped In2O3 NPs were characterized by by x-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) which confirmed the successful doping of tin (Sn) with Indium oxide (In2O3). Anticandidal activity was performed by standard agar dilution method using Candida albicans for the study. The minimum inhibitory/fungicidal concentration (MIC/MFC) values recorded were, 8 & >8 mg/ml for pure In2O3 NPs, 4 & 8 mg/ml for 5%, 2 & 8 mg/ml for 10%, whereas 1 & >4 mg/ml for 15% Sn doped In2O3 NPs, respectively. The topographical alteration caused by Sn doped In2O3 NPs on Candida cells, was clearly observed by SEM examination. A significant enhancement in anticandidal activity was seen, when Candida cells were exposed to (Sn/In = 5%, 10% and 15%). Moreover, we have also evaluated the impact of Sn-In2O3 NPs on human colorectal carcinoma cells (HCT-116). The results demonstrated that Sn-In2O3 NPs (Sn/In = 5%, 10% and 15%), caused dose dependent decrease in the cancer cell viability as the low dosage (2.0 mg/mL) showed 62.11% cell viability, while 4.0, 8.0, 16.0, 32.0 mg/mL dosages showed 20.45%, 18.25%, 16.58%, and 15.58% cell viability. In addition, the treatment of Sn-In2O3 NPs also showed significant cellular and anatomical changes in cancer cells as examined by microscopes. We have also examined the impact of Sn-In2O3 NPs (5%, 10%, 15%) on normal cells (HEK-293) and the results demonstrate that Sn-In2O3 NPs did not reduce the cell viability of normal cells.

New interplay between interstitial and alveolar macrophages explains pulmonary alveolar proteinosis (PAP) induced by indium tin oxide particles

Occupational exposure to indium tin oxide (ITO) particles has been associated with the development of severe lung diseases, including pulmonary alveolar proteinosis (PAP). The mechanisms of this lung toxicity remain unknown. Here, we reveal the respective roles of resident alveolar (Siglec-F^high AM) and recruited interstitial (Siglec-F^low IM) macrophages contributing in concert to the development of PAP. In mice treated with ITO particles, PAP is specifically associated with IL-1α (not GM-CSF) deficiency and Siglec-F^high AM (not Siglec-F^low IM) depletion. Mechanistically, ITO particles are preferentially phagocytosed and dissolved to soluble In³⁺ by Siglec-F^low IM. In contrast, Siglec-F^high AM weakly phagocytose or dissolve ITO particles, but are sensitive to released In³⁺ through the expression of the transferrin receptor-1 (TfR1). Blocking pulmonary Siglec-F^low IM recruitment in CCR2-deficient mice reduces ITO particle dissolution, In³⁺ release, Siglec-F^high AM depletion, and PAP formation. Restoration of IL-1-related Siglec-F^high AM also prevented ITO-induced PAP. We identified a new mechanism of secondary PAP development according to which metal ions released from inhaled particles by phagocytic IM disturb IL-1α-dependent AM self-maintenance and, in turn, alveolar clearance.