Determination of nitrite using sensors based on nickel phthalocyanine polymer modified electrodes

Development of electrochemical sensors for quick detection of environmental (soil and water) NPK ions

All over the world, technology is becoming more and more prevalent in agriculture. Different types of instruments are already being used in this sector. For the time being, every farmer is trying to produce more crops on a piece of land. Eventually, soil loses its nutrients; however, to grow more crops, farmers use more fertilizers without knowing the proper conditions of the soil in real time. To overcome this issue, many scientists have recently focused on developing electrochemical sensors to detect macronutrients, i.e., nitrogen (N), phosphorus (P), and potassium (K), in soil or water rapidly. In this review, we focus mainly on the recent developments in electrochemical sensors used for the detection of nutrients (NPK) in different types of samples. As it is outlined, the use of smart and portable electrochemical sensors can be helpful for the reduction of excess fertilizer and can play a vital role in maintaining suitable conditions in soils and water. We are optimistic that this review can guide researchers in the development of a portable and suitable NPK detection system for soil nutrients.

Nitrite anodic oxidation at Ni(II)/Ni(III)-decorated mesoporous SnO2 and its analytical applications

Hydrothermally formed mesoporous SnO2 was used as a support for nickel chemical deposition and, after subsequent thermal treatment, a high specific surface area (36 m2 g-1) Ni/SnO2 material was obtained. XPS analysis has shown that in the Sn 3d region the spectrum is similar to that of pristine SnO2, whereas Ni species are present on the surface as NiO, Ni2O3 and Ni(OH)2. Mixing Ni/SnO2 with a small amount of Black Pearls (BP) leads to a significant enhancement of the resulting Ni/SnO2-BP composite activity for nitrite anodic oxidation, presumably due to the higher surface area (115 m2 g-1), to better electrical conductivity and to a certain contribution of the BP to an increase in surface density of the active sites. Ni/SnO2-BP also outperforms pristine BP (in terms of Tafel slopes and electron-transfer rates), most likely due to the fact that the Ni(II)/Ni(III) couple can act as an electrocatalyst for nitrite oxidation. A voltammetric method is proposed for the determination of nitrite, over a concentration range of three orders of magnitude (0.05 to 20 mM), with good reproducibility, high stability and excellent sensitivity. The high upper limit of the dynamic range of the analytically useful response might provide a basis for the reliable quantification of nitrite in wastewater.

Recent Advantages of Mediator Based Chemically Modified Electrodes; Powerful Approach in Electroanalytical Chemistry

Background:

Modified electrodes have advanced from the initial studies aimed at understanding electron transfer in films to applications in areas such as energy production and analytical chemistry. This review emphasizes the major classes of modified electrodes with mediators that are being explored for improving analytical methodology. Chemically modified electrodes (CMEs) have been widely used to counter the problems of poor sensitivity and selectivity faced in bare electrodes. We have briefly reviewed the organometallic and organic mediators that have been extensively employed to engineer adapted electrode surfaces for the detection of different compounds. Also, the characteristics of the materials that improve the electrocatalytic activity of the modified surfaces are discussed.

Objective:

Improvement and promotion of pragmatic CMEs have generated a diversity of novel and probable strong detection prospects for electroanalysis. While the capability of handling the chemical nature of the electrode/solution interface accurately and creatively increases , it is predictable that different mediators-based CMEs could be developed with electrocatalytic activity and completely new applications be advanced.

Evaluation of polypyrrole-modified bioelectrodes in a chemical absorption-bioelectrochemical reduction integrated system for NO removal

A Chemical absorption-bioelectrochemical reduction (CABER) system is based on Chemical absorption-biological reduction (CABR) system, which aims at NO removal and has been studied in many of our previous works. In this paper, we applied polypyrrole (PPy) on the electrode of bioelectrochemical reactor (BER) of CABER system, which induced a much higher current density in the cyclic voltammetry (CV) curve for the electrode itself and better NO removal rate in the system. In addition, a Microbial Electrolysis Cell (MEC) is constructed to study its strengthening mechanism. Results shows that PPy-MEC has a greater Faraday efficiency and higher reduction rate of Fe(III)EDTA and Fe(II)EDTA-NO in the solution when compared to original Carbon MEC, which confirms the advantage of PPy-modified electrode(s) in the CABER system. The results of this study are reported for illustration of potential of CABER technology and design of low-cost high-efficiency NO_x control equipment in the future.

A novel and simple spectrophotometric method for detection of nitrite in water

A novel and simple spectrophotometric method is developed for the determination of nitrite in water by using the self-coupling diazotization reagent 2-amino-6-chlorobenzoic acid and UV light illumination. The method only involves one reagent and one step, which can be easily applied to the determination of nitrite and tolerates many foreign anions' effects under acidic conditions.

Marine Spongin: Naturally Prefabricated 3D Scaffold-Based Biomaterial

The biosynthesis, chemistry, structural features and functionality of spongin as a halogenated scleroprotein of keratosan demosponges are still paradigms. This review has the principal goal of providing thorough and comprehensive coverage of spongin as a naturally prefabricated 3D biomaterial with multifaceted applications. The history of spongin's discovery and use in the form of commercial sponges, including their marine farming strategies, have been analyzed and are discussed here. Physicochemical and material properties of spongin-based scaffolds are also presented. The review also focuses on prospects and trends in applications of spongin for technology, materials science and biomedicine. Special attention is paid to applications in tissue engineering, adsorption of dyes and extreme biomimetics.

Synthesis, characterization and nitrite ion sensing performance of reclaimable composite samples through a core-shell structure

The following paper reported and discussed a nitrite ion optical sensing platform based on a core-shell structure, using superamagnetic nanoparticles as the core, a silica molecular sieve MCM-41 as the shell and two rhodamine derivatives as probe, respectively. This superamagnetic core made this sensing platform reclaimable after finishing nitrite ion sensing procedure. This sensing platform was carefully characterized by means of electron microscopy images, porous structure analysis, magnetic response, IR spectra and thermal stability analysis. Detailed analysis suggested that the emission of these composite samples was quenchable by nitrite ion, showing emission turn off effect. A static sensing mechanism based on an additive reaction between chemosensors and nitrite ion was proposed. These composite samples followed Demas quenching equation against different nitrite ion concentrations. Limit of detection value was obtained as low as 0.4μM. It was found that, after being quenched by nitrite ion, these composite samples could be reclaimed and recovered by sulphamic acid, confirming their recyclability.

Nitrite sensing composite systems based on a core-shell emissive-superamagnetic structure: Construction, characterization and sensing behavior

Two recyclable nitrite sensing composite samples were designed and constructed through a core-shell structure, with Fe₃O₄ nanoparticles as core, silica molecular sieve MCM-41 as shell and two rhodamine derivatives as chemosensors, respectively. These samples and their structure were identified with their electron microscopy images, N₂ adsorption/desorption isotherms, magnetic response, IR spectra and thermogravimetric analysis. Their nitrite sensing behavior was discussed based on emission intensity quenching, their limit of detection was found as low as 1.2μM. Further analysis suggested a static sensing mechanism between nitrite and chemosensors through an additive reaction between NO⁺ and chemosensors. After finishing their nitrite sensing, these composite samples and their emission could be recycled and recovered by sulphamic acid.

Towards recyclable optical nitrite sensing composite structures: Design, synthesis, characterization and sensing performance

Two site-specific nanocomposite samples were designed and prepared for nitrite sensing. A core-shell structure was applied in them, using Fe₃O₄ nanoparticles as core, silica molecular sieve MCM-41 as shell and two rhodamine derivatives as chemosensor, respectively. These two composite samples and their core-shell structure were investigated by electron microscopy images, N₂ adsorption/desorption, magnetic property, IR spectra and thermogravimetric analysis. Nitrite sensing performance of these two composite samples was evaluated with their emission quenching. Limit of detection was determined as 1.1μM. Further analysis indicated that our chemosensors followed a static sensing mechanism based on an additive reaction between NO⁺ and chemosensors. These two composite samples showed recyclability after being quenched by nitrite.

On two site-specific nitrite-sensing nanocomposites having a core-shell structure: Construction, characterization and sensing performance

This paper reported two site-specific nitrite-sensing nanocomposite samples having a core-shell structure, where Fe₃O₄ nanoparticles were used as core, two rhodamine derivatives served as chemosensor and MCM-41 was applied as supporting host, respectively. These composite samples and their structure were analyzed and confirmed SEM/TEM, XRD, N₂ adsorption/desorption, magnetic feature, IR and thermogravimetric analysis. Their nitrite sensing performance was discussed based on emission quenching, with limit of detection as low as 1.2μM. Detailed analysis suggested that these composite samples followed a static sensing mechanism based on an additive reaction between NO⁺ and chemosensors. After being quenched by nitrite, these samples could be recovered by sulphamic acid.

Methods for the detection and determination of nitrite and nitrate: A review

Various techniques for the determination of nitrite and/or nitrate developed during the past 15 years were reviewed in this article. 169 references were covered. The detection principles and analytical parameters such as matrix, detection limits and detection range of each method were tabulated. The advantages and disadvantages of various methods were evaluated. In comparison to other methods, spectrofluorimetric methods have become more attractive due to its facility availability, high sensitivity and selectivity, low limits of detection and low-cost.

Electrochemical Determination of Food Preservative Nitrite with Gold Nanoparticles/p-Aminothiophenol-Modified Gold Electrode

Due to the negative impact of nitrate and nitrite on human health, their presence exceeding acceptable levels is not desired in foodstuffs. Thus, nitrite determination at low concentrations is a major challenge in electroanalytical chemistry, which can be achieved by fast, cheap, and safe electrochemical sensors. In this work, the working electrode (Au) was functionalized with p-aminothiophenol (p-ATP) and modified with gold nanoparticles (Au-NPs) to manufacture the final (Au/p-ATP-Au_nano) electrode in a two-step procedure. In the first step, p-ATP was electropolymerized on the electrode surface to obtain a polyaminothiophenol (PATP) coating. In the second step, Au/p-ATP-Au_nano working electrode was prepared by coating the surface with the use of HAuCl₄ solution and cyclic voltammetry. Determination of aqueous nitrite samples was performed with the proposed electrode (Au/p-ATP-Au_nano) using square wave voltammetry (SWV) in pH 4 buffer medium. Characteristic peak potential of nitrite samples was 0.76 V, and linear calibration curves of current intensity versus concentration was linear in the range of 0.5–50 mg·L⁻¹ nitrite with a limit of detection (LOD) of 0.12 mg·L⁻¹. Alternatively, nitrite in sausage samples could be colorimetrically determined with high sensitivity by means of p-ATP‒modified gold nanoparticles (AuNPs) and naphthylethylene diamine as coupling agents for azo-dye formation due to enhanced charge-transfer interactions with the AuNPs surface. The slopes of the calibration lines in pure NO₂⁻ solution and in sausage sample solution, to which different concentrations of NO₂⁻ standards were added, were not significantly different from each other, confirming the robustness and interference tolerance of the method. The proposed voltammetric sensing method was validated against the colorimetric nanosensing method in sausage samples.

Improvement of electrocatalytic effect in voltammetric sensors based on phthalocyanines

Voltammetric sensors based on phthalocyanines have been used to detect a variety of compounds. In this paper, the state of the art of sensors prepared using classical techniques will be revised. Then, new strategies to improve the performance of the sensors will be described using as example sensors chemically modified with lutetium bisphthalocyanine (LuPc[Formula: see text] dedicated to the detection of phenols of interest in the food industry. Classical LuPc2 carbon paste electrodes can detect phenols such as catechol, caffeic acid or pyrogallol with limits of detection in the range of 10[Formula: see text]–10[Formula: see text] M. The performance can be improved by using nanostructured Langmuir–Blodgett (LB) or Layer by Layer (LbL) films. The enhanced surface to volume ratio produce an increase in the sensitivity of the sensors. Limits of detection of 10[Formula: see text]–10[Formula: see text] M are attained, which are one order of magnitude lower than those obtained using conventional carbon paste electrodes. Moreover, these techniques can be used to co-immobilize two electrocatalytic materials in the same device. The limits of detection obtained in LB sensors combining LuPc2/AuNPs or LuPc2/CNT are further improved. Finally, the LB technique has been used to prepare biosensors where a phenol oxydase (such as tyrosinase or lacasse) is immobilized in a biomimetic environment that preserves the enzymatic activity. Moreover, LuPc2 can be co-immobilized with the enzyme in a lipidic film formed by arachidic acid (AA). LuPc2 can act as an electron mediator facilitating the electron transfer. These biomimetic sensors formed by LuPc2/AA/enzyme show Limits of detection of 10[Formula: see text] M and an enhanced selectivity.

Hydrophobicity effects in iron polypyridyl complex electrocatalysis within Nafion thin-film electrodes

Four polypyridyl redox catalysts Fe(bp)₃²⁺, Fe(ph)₃²⁺, Fe(dm)₃²⁺, and Fe(tm)₃²⁺ (with bp, ph, dm, and tm representing 2,2′-bipyridine, 1,10-phenanthroline, 4,4′-dimethyl-2,2′-bipyridine, and 3,4,7,8-tetramethyl-1,10-phenanthroline, respectively) are investigated for the electrocatalytic oxidation of three analytes (nitrite, arsenite, and isoniazid).

Polymer/carbon nanotubes coated graphite surfaces for highly sensitive nitrite detection

This study describes the preparation of poly(vinylferrocenium)/multi-walled carbon nanotubes (PVF(+)/MWCNTs) coated electrode and its use for sensitive electrochemical nitrite detection. PVF(+)/MWCNTs composite coated disposable pencil graphite electrode (PVF(+)/MWCNTs/PGE) was prepared by electropolymerization of poly(vinylferrocene) (PVF) in the presence of MWCNTs with one-step electropolymerization. Characterization of PVF(+)/MWCNTs/PGE was carried out with scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Then electrochemical detection of nitrite was performed using differential pulse voltammetry (DPV). Nanocomposite coated electrode showed high sensitivity to nitrite with a detection limit of 0.1 μM. The electrode platform was successfully applied to a commercial mineral water sample.

Spectrofluorimetric determination of trace nitrite with o-phenylenediamine enhanced by hydroxypropyl-β-cyclodextrin

A simple and sensitive spectrofluorimetric method was developed for the determination of nitrite in environmental and food samples. The method was based on the selective reaction of o-phenylenediamine with nitrite in acidic medium to form benzotriazole, which exhibited strong fluorescence at 568 nm with excitation at 420 nm in alkaline medium. The detection limit and sensitivity of the proposed method were improved by hydroxypropyl-β-cyclodextrin through complexation. The linear calibration range for nitrite was 0.04-0.8 μg mL(-1) with a detection limit of 13.6 ng mL(-1) (S/N=3.29). The relative standard deviation for ten determinations of 0.1 and 0.4 μg mL(-1) nitrite were 1.38% and 2.01%, respectively. Twenty-eight coexistent ions were examined, and no serious interference for most of ions was observed. The proposed method was successfully applied for the determination of nitrite in the water, sausage and soil samples with recoveries of 95.5-108.5%. The results were in good agreement with the recommended AOAC method.

Synthesis and characterization of highly soluble hexadecachloro- and hexadecafluorophthalocyanine ruthenium(II) complexes

A new synthesis is reported for hexadecafluorophthalocyanineruthenium(II), F16Pc (2-) RuIIand hexadecachlorophthalocyanineruthenium(II), Cl16Pc (2-) RuII, is reported for the first time. These paramagnetic species, which contain no axial ligand, are quite reasonably soluble in a range of common organic solvents. We report and discuss electronic and vibrational (infrared and resonance Raman) spectroscopic, MALDI-TOF and magnetic data. In addition we report electrochemical data and use spectroelectrochemical methods to obtain the electronic spectra of these species in the phthalocyanine(1-), (3-) and (4-) oxidation states.