Use of enzymatic hydrolysis for the multi-element determination in mussel soft tissue by inductively coupled plasma-atomic emission spectrometry

Fibrous g-C3N4@Tio2 Nanocomposites-Based Dispersive Micro-Solid Phase Extraction for Chromium Speciation in Cow Milk by ICP-MS after Digestion Treatment with Artificial Gastric Juice

BACKGROUND

Chromium is an interesting element because its toxicity depends on its speciation. Thus, knowledge of Cr speciation in cow milk is essential to human health.

OBJECTIVE

This study aims to achieve real bioaccessible species in cow milk, including Cr(III), Cr(VI), residual, digestible, and total Cr.

METHODS

Samples were treated with artificial gastric juice, followed by dispersive micro-solid phase extraction (DMSPE) combined with ICP-MS for Cr speciation. Fibrous g-C3N4@TiO2 nanocomposites (FGCTNCs) were used as a novel adsorbent for DMSPE.

RESULTS

The method detection limits were 110 pg/g (Cr(III)) and 260 pg/g (Cr(VI)) for milk powder (0.1 g), and 5.1 pg/g (Cr(III)) and 13 pg/g (Cr(VI)) for liquid cow milk (2 mL). The relative standard deviations (RSDs), obtained by analyzing the standard solutions containing 1.0 ng/mL of the analytes in sequence for nine times, were 4.3% and 5.1% for Cr(III) and Cr(VI), respectively. Linearity was observed over the range of 4 magnitude orders with correlation coefficients better than 0.9961. The enrichment factor of 100 was obtained. The majority of Cr in the samples was transferred into digestion solution. The content of Cr(III) is much higher than that of Cr(VI) in the digestion solution.

CONCLUSIONS

This method has the advantages of reduced solvent consumption, less adsorbent dosage, and high extraction efficiency. It may become a valuable strategy for elemental species in food samples.

HIGHLIGHTS

The samples were treated with artificial gastric juice to avoid the inter-conversion of species. FGCTNCs exhibit the merits of N-rich functional groups and selective adsorption for the analytes.

Frequency of use controls chemical leaching from drinking-water containers subject to disinfection

Microbial-, and chemical-based burden of disease associated with lack of access to safe water continues to primarily impact developing countries. Cost-effective health risk-mitigating measures, such as of solar disinfection applied to microbial-contaminated water stored in plastic bottles have been increasingly tested in developing countries adversely impacted by epidemic water-borne diseases. Public health concerns associated with chemical leaching from water packaging materials led us to investigate the magnitude and variability of antimony (Sb) and bromine (Br) leaching from reused plastic containers (polyethylene terephthalate, PET; and polycarbonate, PC) subject to UV and/or temperature-driven disinfection. The overall objective of this study was to determine the main and interactive effects of temperature, UV exposure duration, and frequency of bottle reuse on the extent of leaching of Sb and Br from plastic bottles into water. Regardless of UV exposure duration, frequency of reuse (up to 27 times) was the major factor that linearly increased Sb leaching from PET bottles at all temperatures tested (13-47 °C). Leached Sb concentrations (∼360 ng L(-1)) from the highly reused (27 times) PET bottles (minimal Sb leaching from PC bottles, <15 ng L(-1)) did not pose a serious risk to human health according to current daily Sb acceptable intake estimates. Leached Br concentrations from both PET and PC containers (up to ∼15 μg L(-1)) did not pose a consumer health risk either, however, no acceptable daily dose estimates exist for oral ingestion of organo-brominated, or other plasticizers/additives compounds if they were to be found in bottled water at much lower concentrations. Additional research on potential leaching of organic chemicals from water packaging materials is deemed necessary under relevant environmental conditions.

Development of a pressurised liquid extraction and liquid chromatography with electrospray ionization-tandem mass spectrometry method for the determination of domoic acid in shellfish

Amnesic shellfish poisoning (ASP) is a potentially lethal human toxic syndrome which is caused by domoic acid (DA) that originates in marine phytoplankton belonging to the Pseudonitzschia genus. A confirmatory and sensitive procedure has been developed and validated for the determination of DA in shellfish. The proposed method includes pressurised liquid extraction (PLE) with methanol/acetone (9:1), florisil clean-up purification inside the PLE extraction cell and detection by liquid chromatography (LC) coupled to electrospray ionization in positive mode tandem mass spectrometry (ESI-MS-MS). Comparison of ionization sources (ESI, atmospheric pressure ionization (APCI) atmospheric pressure photoionization (APPI) and combined APCI/APPI) were carried out in order to improve the analytical signal. The main parameters affecting the performance of the different ionization sources and PLE parameters were previously optimised using statistical design of experiments (DOE). Linear calibrations were obtained using mussel tissue extracts 0.05-5 microg DA/ml (R2>0.999). The limits of detection (LOD) and quantitation (LOQ) of the method were 0.2 and 0.5 microg/g respectively and recoveries ranged from 81 to 95%. This method was successfully applied to determine DA levels in 46 shellfish samples collected from Valencian (Spain) supermarkets, showing high sample throughput.

Feasibility of Pressurization To Speed Up Enzymatic Hydrolysis of Biological Materials for Multielement Determinations

The feasibility of pressurized solvents (liquids at a high pressure and/or high temperature without the subcritical point being reached) has been newly investigated to accelerate enzymatic hydrolysis processes of mussel tissue for multielement determinations. The target elements (Al, As, Cd, Co, Cu, Fe, Hg, Li, Mn, Pb, Se, Sr, V, and Zn) were released from dried mussel tissue by action of two proteases (pepsin and pancreatin), and they have been evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES). Variables inherent to the enzymatic activity (pH, ionic strength, temperature, and enzyme mass) and factors affecting pressurization (static time, pressure, and number of cycles) were simultaneously studied by applying a Plackett-Burman design (PBD) as the screening method. Results showed that pH, ionic strength, and temperature were the most statistically significant factors (confidence interval of 95%) under pressurized conditions for pepsin, while pH and ionic strength affected pancreatin activity. This means that metal extraction is mostly attributed to enzymatic activity. The static time (enzymatic hydrolysis time) was found statistically nonsignificant for most of the elements, meaning that the hydrolysis procedure can be finished within a 2-15 min range. For pepsin, optimized conditions (pH 1.0, temperature 40 degrees C, pressure 1500 psi, static time 2 min, and number of cycles 3) gave quantitative extractions for As, Cd, Co, Cu, Hg, Li, Mn, Pb, Se, Sr, V, and Zn. The pepsin mass was 0.05 g, and the solution was Milli-Q water at pH 1.0 (adjusted with hydrochloric acid). For pancreatin, quantitative recoveries were only reached for As, Cd, Cu, Li, Pb, and Sr at room temperature, at a pressure of 1500 psi, for a static time of 2 min and a number of cycles of 3. The extraction solution was a 0.3 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer at a pH of 7.5 working at room temperature. Around 0.5 g of diatomaceous earth was used as dispersing agent for hydrolyses with either enzyme. Analytical performances, such as limits of detection and quantification and repeatability of the overall procedure, have been established. Finally, accuracy of the methods was assessed by analyzing seafood certified reference materials (GBW-08571, DORM-2, DOLT-3, TORT-2), fatty tissues certified reference materials (BCR 185, NIST 1577b), and fibrous certified reference materials (BCR 62, GBW-08501).