Synthesis of surface molecularly imprinted polymer and the selective solid phase extraction of imidazole from its structural analogs

Recent Advances in Solid-Phase Extraction (SPE) Based on Molecularly Imprinted Polymers (MIPs) for Analysis of Hormones

Steroid hormones are active substances that are necessary in the normal functioning of all physiological activities in the body, such as sexual characteristics, metabolism, and mood control. They are also widely used as exogenous chemicals in medical and pharmaceutical applications as treatments and at times growth promoters in animal farming. The vast application of steroid hormones has resulted in them being found in different matrices, such as food, environmental, and biological samples. The presence of hormones in such matrices means that they can easily come into contact with humans and animals as exogenous compounds, resulting in abnormal concentrations that can lead to endocrine disruption. This makes their determination in different matrices a vital part of pollutant management and control. Although advances in analytical instruments are constant, it has been determined that these instruments still require some sample preparation steps to be able to determine the occurrence of pollutants in the complex matrices in which they occur. Advances are still being made in sample preparation to ensure easier, selective, and sensitive analysis of complex matrices. Molecularly imprinted polymers (MIPs) have been termed as advanced solid-phase (SPE) materials for the selective extraction and preconcentration of hormones in complex matrices. This review explores the preparation and application of MIPs for the determination of steroid hormones in different sample types.

An ionic liquid functionalized polymer for simultaneous removal of four phenolic pollutants in real environmental samples

An ionic liquid functionalized polymer (IL-P) was prepared feasibly and simply by grafting1-butyl-3-vinylimidazolium bromide onto the silica surface. The IL-P was fully characterized, and the results showed that IL-P has a rough surface with a lower specific surface area (205.49 m² g^-1), and the involvement of ionic liquid significantly improved the adsorption performance of IL-P. The pH, initial concentration, adsorption time and temperature were investigated to discuss the adsorption behaviors of IL-P in aqueous solution. The adsorption process of 2,4-dichlorophenol (2,4-DCP), bisphenol A (BPA) and 2,4-dinitrophenol (2,4-DNP) onto IL-P better fitted the pseudo-second-order model, while that of 2-isonaphthol (2-NP) followed the pseudo-first-order model. The adsorption behaviors of IL-P towards 2,4-DCP and 2,4-DNP fitted well with Liu isotherm model, and that of BPA and 2-NP can be described by Langmuir model. The maximum adsorption capacities of 2,4-DCP, BPA, 2,4-DNP and 2-NP bound on IL-P was 239.7, 68.39, 56.86 and 64.28 mg g^-1, respectively, and the adsorption of IL-P is a spontaneous physical process. Comparing with other adsorbent, the as-prepared IL-P showed excellent recognition ability towards the phenolic compounds and can be applied to adsorb and remove trace 2,4-DCP, 2-NP, 2,4-DNP and BPA simultaneously in complicated wastewater and soil samples.

Water compatible imprinted polymer prepared in water for selective solid phase extraction and determination of ciprofloxacin in real samples

A novel water compatible ciprofloxacin imprinted polymer is synthesized in water via a green, non-toxic and environmentally friendly polymerization process. Hydrophilic groups, including anionic chlorine, hydroxyl, and carbonyl oxygen provided by a bifunctional monomer comprising 1-allyl-3-vinylimidazole chloride and 2-hydroxyethyl methacrylate, are introduced into the imprinted material, which allows the polymer to interact strongly with imprinting molecule via hydrogen bonds, electrostatic and π-π dipole interactions in aqueous solution. Rebinding experiments show that the obtained molecularly imprinted polymer (MIP) presents special molecular recognition towards quinolone antibiotics (ciprofloxacin, levofloxacin and pefloxacin mesylate) in aqueous matrices. The adsorption process of ciprofloxacin on MIP and non-imprinted polymer (NIP) substrates involves spontaneous exothermic reactions, and the maximum rebinding capacities of ciprofloxacin on MIP and NIP at 25 °C are 19.96 and 8.86 mg g^-1, respectively. The excellent selectivity and hydrophilicity of this imprinted polymer makes it suitable for use as an adsorbent in solid phase extraction. Under the optimized conditions, the presented MIP-SPE protocol exhibits a wide linear range between 0.29 and 1.47 × 10⁵ μg L^-1 and has been successfully applied for the separation and enrichment of trace ciprofloxacin in real water, soil and pork samples with satisfactory recoveries of 87.33-102.50%. The proposed study implies the promising prospect of this green and water compatible MIP in highly effective recognition and separation of trace quinolones in complex matrics.

Synthesis and characterization of paclitaxel-imprinted microparticles for controlled release of an anticancer drug

In this study, novel molecularly imprinted polymer (MIP) microparticles containing methacryl polyhedral oligomeric silsesquioxane (M-POSS) were synthesized through the RAFT precipitation polymerization (RAFTPP) method using paclitaxel (PTX) as the templates. During the course of this investigation, methacrylic acid (MAA) was used as the functional monomer, while ethylene glycol dimethacrylate (EGDMA) was utilized as a cross-linker. The effects of different molar ratios of M-POSS on the microparticles were characterized. The obtained MIP microparticles were confirmed by FT-IR and TGA-DSC. The results of SEM showed regular spherical-shaped MIP microparticles with diameters around 170-490 nm. The PTX loading quantity was closely correlated with the content of M-POSS, and the MIP microparticles showed a satisfactory affinity to PTX with high drug loading (17.1%) and encapsulation efficiency (85.5%). Moreover, these MIP microparticles were sensitive to pH, and consequently the release rates of PTX at pH 5 were much faster than those at pH 7 due to the acid cleavage of the hydrogen bonds. In addition, the results from release experiments of the MIP microparticles showed a very slow and controlled release of PTX, which heralded promising potential as a carrier for PTX delivery in cancer therapy.

Influence of hydrogen bond accepting ability of anions on the adsorption performance of ionic liquid surface molecularly imprinted polymers

To illuminate the influence mechanism of anionic structure of ionic liquids (ILs) on the adsorption performance of surface molecularly imprinted polymers (MIPs), in this work, six newly designed MIPs were prepared on the surface of amino-poly(styrene-divinylbenzene) particles by using imidazolium ILs with the same cation [C₄mim]⁺ but different anions (Cl, CH₃SO₃, PF₆, BF₄, C₄F₇O₂, C₄F₉SO₃) as template molecules, methacrylic acid as functional monomer, and ethylene dimethacrylate as cross-linker. The resulting MIP materials were characterized by IR and SEM, and the influence of hydrogen bond accepting ability of anions on the adsorption performance of the MIPs for the ILs was investigated in acetonitrile. It was found that adsorption capacity of the MIPs towards the ILs decreased in the order MIP_[C4mim][Cl] > MIP_{[C4mim][C4F7O2]} ≥ MIP_[C4mim][BF4] and MIP_{[C4mim][CH3SO3]} > MIP_{[C4mim][C4F9SO3]} > MIP_[C4mim][PF6], which is in good agreement with the ability of anions of the ILs to form hydrogen bonds. Ultraviolet, ¹H-NMR and ³⁵Cl-NMR spectroscopy was then used to study the interactions of anions of the ILs with the functional monomer. It was found that the hydrogen bond interaction between anions of the ILs and acidic proton of the functional monomer was the main driving force for the high adsorption selectivity of the imprinted polymers, and the stronger hydrogen bond interaction indicates higher binding capacity and higher selectivity of the polymers towards the ILs. It was also verified that the ILs with stronger hydrogen bond accepting ability of anions could be selectively extracted by the corresponding IL-MIPs. These results may provide new insight into the recognition mechanism of MIPs for ILs, and are also useful for the rational design of this new class of imprinting materials.

Preparation of molecularly imprinted polymers using theanine as dummy template and its application as SPE sorbent for the determination of eighteen amino acids in tobacco

In this paper, a novel dummy template molecularly imprinted polymer (DMIP) based on a vinyl-SiO2 microspheres surface for the simultaneous selective recognition and enrichment of 18 amino acids was prepared via a surface molecular imprinting technique using theanine as a dummy template. Compared to the imprinted polymers prepared using traditional polymerization techniques, the obtained DMIPs exhibited a regular spherical shape and were relatively monodisperse. The maximal sorption capacity (Qmax) of the resulting DMIPs for the 18 amino acids was up to 1444.3 mg g(-1). A kinetic binding study showed that the sorption capacity reached 85.40% of Qmax in 25 min and sorption equilibrium at 30 min. The imprint factors of the sorbents ranged from 2.86 to 6.9 for the 18 amino acids, which indicated that the DMIP sorbents have high selectivity. An HPLC-UV method for the simultaneous determination of 18 amino acids in tobacco and tobacco smoke was developed using the DMIPs as sorbents for solid phase extraction (SPE) in the sample pretreatment procedure. Under the optimum experimental conditions, the materials had enrichment factors of up to 200 for the amino acids, and the recoveries of the 18 amino acids in tobacco smoke were in the range from 79% to 104% with relative standard deviations of less than 7.4%. It indicated that the obtained DMIP sorbents could specifically recognize the amino acids from complicated samples.

Magnetic two-dimensional molecularly imprinted materials for the recognition and separation of proteins

We report a novel design of magnetic two-dimensional molecularly imprinted polymers on Fe₃O₄@GO for the high recognition and separation of proteins.

Designing and preparation of ferulic acid surface-imprinted material and its molecular recognition characteristics

Ferulic acid (FA) is a phenolic acid with a styrene-type structure, which has many important bioactive and pharmacological functions.

Separation and purification of the antioxidant compound hispidin from mushrooms by molecularly imprinted polymer

A new molecularly imprinted polymer (MIP), prepared by hispidin as the template molecule, was synthesized and applied as an adsorbent phase for solid phase extraction (SPE) to isolate and enrich hispidin from eight species of mushrooms. The optimization of synthesis and the adsorption behaviors of the MIPs were investigated in detail. In comparison with C18-SPE, MIP-SPE displayed high selectivity and good affinity for hispidin for extract of Phellinus igniarius. The antioxidant activity of the extracts after using the MIPs was evaluated by free radical scavenging activity, and inhibition of erythrocyte hemolysis, and lipid peroxidation. This developed method provided a rapid, selective, and effective approach for separation and enrichment of active compounds from the natural products.

Selective photodegradation of 2-mercaptobenzothiazole by a novel imprinted CoFe2O4/MWCNTs photocatalyst

Photocatalytic activity of a novel imprinted CoFe₂O₄/MWCNTs photocatalyst is enhanced by introducing PPy into the surface-imprinted layer, and the novel imprinted CoFe₂O₄/MWCNTs photocatalyst possesses better selection for the degradation of MBT.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Development of highly sensitive electrochemical genosensor based on multiwalled carbon nanotubes-chitosan-bismuth and lead sulfide nanoparticles for the detection of pathogenic Aeromonas

In this paper, we reported the construction of new high sensitive electrochemical genosensor based on multiwalled carbon nanotubes-chitosan-bismuth complex (MWCNT-Chi-Bi) and lead sulfide nanoparticles for the detection of pathogenic Aeromonas. Lead sulfide nanoparticles capped with 5'-(NH2) oligonucleotides thought amide bond was used as signalizing probe DNA (sz-DNA) and thiol-modified oligonucleotides sequence was used as fixing probe DNA (fDNA). The two probes hybridize with target Aeromonas DNA (tDNA) sequence (fDNA-tDNA-szDNA). The signal of hybridization is detected by differential pulse voltammetry (DPV) after electrodeposition of released lead nanoparticles (PbS) from sz-DNA on the surface of glass carbon electrode decorated with MWCNT-Chi-Bi, which improves the deposition and traducing electrical signal. The optimization of incubation time, hybridization temperature, deposition potential, deposition time and the specificity of the probes were investigated. Our results showed the highest sensibility to detect the target gene when compared with related biosensors and polymerase chain reaction (PCR). The detection limit for this biosensor was 1.0×10(-14) M. We could detect lower than 10(2) CFU mL(-1) of Aeromonas in spiked tap water. This method is rapid and sensitive for the detection of pathogenic bacteria and would become a potential application in biomedical diagnosis, food safety and environmental monitoring.

Introduction of an ordered porous polymer network into a ceramic alumina membrane via non-hydrolytic sol–gel methodology for targeted dynamic separation

Highly selective composite imprinted alumina membrane (CIAM) for gentisic acid (GA) was successfully prepared via non-hydrolytic sol–gel method to target separation.

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted solid-phase sorbent was synthesized. The as-prepared material was characterized by SEM, Brunauer-Emmett-Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C(n)mimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1-butyl-3-methyl imidazolium chloride ionic liquid. The average recoveries of 1-butyl-3-methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0-102.0% with the RSD lower than 5.8%.

Synthesis of multi-core-shell magnetic molecularly imprinted microspheres for rapid recognition of dicofol in tea

Magnetic multi-core-shell molecularly imprinted microspheres (Fe3O4@MIMs) based on multi-Fe3O4 nanoparticles as core structures and dummy imprinted materials as shell structures have been synthesized by a surface-imprinted technique using dichlorodiphenyltrichloroethane as the dummy template and were successfully used as a specific adsorbent for rapid isolation of trace levels of dicofol from teas. The resulting Fe3O4@MIMs were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer, and thermogravimetric analysis. In comparison to the imprinted polymers prepared by the traditional polymerizations, the obtained Fe3O4@MIMs showed regularly spherical shape, porous morphologies, high saturation magnetization [56.8 electromagnetic units (emu)/g], and rapid response time (15 s). The as-synthesized Fe3O4@MIMs, which incorporated the excellent molecular recognition and magnetic separation properties, were successfully used as special adsorbents for rapid isolation and extraction of trace levels of dicofol and its analogues from a complicated tea matrix.