Development of cloud point extraction using pH-sensitive hydrogel for preconcentration and determination of malachite green

Development of Thermochromic Ink Using the Anthocyanidin-Based Red-Cabbage Extract for Anticounterfeiting Applications

Temperature-driven colorful switching inks have been an interesting security encoding method to improve the anticounterfeiting properties of commercially available merchandise. Recently, thermochromic inks have faced many disadvantages, such as low efficiency, high cost, and low durability. In the current study, we developed self-healable ink from poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA) integrated with the anthocyanidin(ACY)-based red-cabbage extract in the presence of ferrous sulfate for authentication purposes. Self-healable inks have been able to guarantee durability and thermal stability. Environmentally friendly, ACY-based chromophore was extracted from Brassica oleracea L. var. Capitata (red-cabbage) to serve as a spectroscopic probe immobilized into PAMPSA. The prepared self-healable nanocomposite ink (PAMPSA-ACY) displayed temperature-induced chromism with high reversibility and thermal stability. Different self-healable nanocomposite inks of thermochromic features were prepared employing different ratios of the ACY-based red-cabbage extract. As described by Commission Internationale de L'éclairage Lab coordinates, homogeneous films were stamped on the paper surface to show a purple color (631 nm) able to switch color into red (458 nm) with the increase in temperature from 25 to 65 °C, respectively. Transmission electron microscopy, infrared spectra (FT-IR), energy-dispersive X-ray, and scanning electron microscopy were utilized to inspect the morphological behavior and chemical compositions of thermochromic prints. Both mechanical and rheological properties of ink-printed paper substrates and ink solution were also investigated. Both of antimicrobial activity and cytotoxicity study of the nanocomposite ink (PAMPSA-ACY) were also evaluated. Various industries can take the advantage of the current ink as a competent approach for anticounterfeiting purposes.

Polyvinyl alcohol-based hydrogel sorbent for extraction of parabens in human milk samples by in-tube SPME–LC–UV

In this work, we developed an in-tube solid-phase microextraction (SPME) device consisting of a fused silica capillary modified with a polyvinyl alcohol (PVOH) hydrogel. Methylparaben, ethylparaben, propylparaben, and butylparaben were determined in human milk samples by using the in-tube SPME device coupled with liquid chromatography with spectrophotometric detection in the ultraviolet region (LC-UV). The inner surface of the fused silica capillary was silanized to allow covalent modification with the PVOH-hydrogel, using glutaraldehyde as cross-linking agent. The developed device was used up to 250 times with no reduction in the analytes' peak areas or carryover effect, besides having a low production cost. The human milk samples showed a significant matrix effect for parabens with higher logKo/w. Low limits of quantification (LLOQ) between 10.0 and 15.0 ng mL-1 were obtained with RSD values in the range of 1.18 to 18.3%. For the intra- and inter-day assays, RSD values from 5.6 to 16.5% and accuracy from 74.5 to 128.8% were achieved. The PVOH-based hydrogel sorbent allowed the use of water as desorption solvent, eliminating the use of organic solvents, which follows the principles of green chemistry. The results showed a great application potential of the PVOH-based hydrogel sorbent for the extraction of organic compounds from high-complexity samples.

Study of the Fabrication of Gold Nanoparticle-Graphene-Arrayed Micro/Nanocavities as SERS Substrates Compared to Two Different Angles of Triangular Pyramid Tips

Surface-enhanced Raman scattering (SERS) has attracted attention because of its enormous potential to detect molecules with low concentrations. The method of fabricating SERS substrates is of great importance for improving the detection resolution. However, SERS substrates with different triangular pyramid tips fabricated by using the tip-based nanoindentation method has not been reported. Here, we prepared arrayed micro/nanocavities on copper-based graphene using the continuous indentation method with a Berkovich tip and a cube-corner tip, which have different face angles. Gold nanoparticles were then sputtered onto the graphene-copper micro/nanocavities to form the Au@GR@Cu micro/nanocavities SERS substrates. The substrates formed using the Berkovich tip and cube-corner tip were labeled B2-B9 and C2-C9, respectively, in which the numbers indicate the machining feed. Rhodamine 6G (R6G) was employed, and the Raman intensities of R6G on the differently arrayed Au@GR@Cu micro/nanocavities were measured. The Raman intensities of R6G were stronger on the pile-ups than on the inverted triangular pyramid cavities. The Raman intensities of R6G were highest on the C2 and B2 structures and lowest on the C9 and B9 structures. The Raman intensities of R6G on the arrayed Au@GR@Cu micro/nanocavities fabricated by the cube-corner tip were stronger than those on the arrayed Au@GR@Cu micro/nanocavities fabricated using the Berkovich tip with the same machining feed. In addition, the electric field intensity and distribution of the B9 and C9 arrayed Au@GR@Cu were simulated using Comsol software. Au@GR@Cu structures fabricated by the cube-corner tip were generated with higher electric field intensities. Furthermore, the relative standard deviations at 1362 cm^-1 of R6G were 6.19 and 6.62% on the C2 and C4 surfaces, respectively, showing good homogeneity. The SERS spectra of 10^-9 mol/L malachite green solution and 10^-6 mol/L carbaryl solution were recognized on the C1, C2, and C4 surfaces on day 1 and after 3 months, respectively. After storage at room temperature for 3 months, the reductions in the Raman intensities were less than 10%, indicating excellent stability. The results showed that the arrayed Au@GR@Cu micro/nanocavities fabricated using the cube-corner tip performed better than those fabricated using the Berkovich tip and exhibited excellent uniformity, availability, and stability, providing great potential for detecting pesticides at low concentrations.

Application of stimuli-responsive materials for extraction purposes

Stimuli-responsive materials, frequently designated as "smart/intelligent materials", can modify their structure or properties by either a biological, physical, or chemical stimulus which, if properly controlled, could be used for specific applications. Such materials have been studied and exploited in several fields, like electronics, photonics, controlled drugs administration, imaging and medical diagnosis, among others, as well as in Analytical Chemistry where they have been used as chromatographic stationary phases, as part of sensors and for extraction purposes. This review article pretends to provide an overview of the most recent applications of these materials (mostly polymeric materials) in sample preparation for extraction purposes, as well as to provide a general vision of the current state-of-the-art of this field, their potential use and future applications.

Sensitive, simple and rapid colorimetric detection of malachite green in water, salmon and canned tuna samples based on gold nanoparticles

BACKGROUND

Malachite green is used in aquaculture and fisheries as a fungicide and antiseptic and it is also used in industry as a dye. However, malachite green is carcinogenic and highly toxic for humans and animals. In this study, a spectrophotometric method was developed to detect malachite green. The method was based on the surface plasmon resonance property of gold nanoparticles and interaction between malachite green and gold nanoparticles.

RESULTS

Malachite green-gold nanoparticles were rapidly aggregated in the acidic medium; as a result, a color change from red to blue was observed, which was easily detectable by the naked eye. The absorption ratio (A623/A520) of the gold nanoparticles in an optimized system exhibited a linear correlation with malachite green concentration. The method detection limit and linear range were 3 and 50-350 ng mL^-1 , respectively. The method was applied successfully to detect malachite green in different samples.

CONCLUSION

The method was simple and rapid to detect malachite green. The most important advantages of the method are the possibility of malachite green determination with very good accuracy and sensitivity using a simple UV-visible spectrometer without any expensive or sophisticated instrumentation and also the versatility of real samples. © 2018 Society of Chemical Industry.

Rapid liquid-phase microextraction of analytes from complex samples on superwetting porous silicon for onsite SALDI-MS analysis

To simplify the pretreatment process of complex samples is a key step for rapid detection. Herein, we report a single-step method to rapidly extract analytes with liquid-phase microextraction (LPME) from complex samples on a superwetting porous silicon (PSi) for onsite detection with surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). The operation time is less than 3 min with this simple method. The limit of detection (LOD) of malachite green in lake water is lowered to 10^-13 M, that of verapamil and methadone in whole blood is down to 10^-11 M and 10^-13 M, in urine is 10^-13 M and 10^-14 M, respectively; and the ranges of quantification is up to 8 or 9 orders of magnitude with high precision (coefficients of determination (R²) > 0.98) for the complex samples. This method could provide an approach to directly extract target compounds from complex samples on substrate for SALDI-MS analysis.

Comparison between dispersive solid-phase and dispersive liquid-liquid microextraction combined with spectrophotometric determination of malachite green in water samples based on ultrasound-assisted and preconcentration under multi-variable experimental design optimization

The ultrasound-assisted dispersive solid-phase microextraction (USA-DSPME) and the ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) developed for as an ultra preconcentration and/or technique for the determination of malachite green (MG) in water samples. Central composite design based on analysis of variance and desirability function guide finding best operational conditions and represent dependency of response to variables viz. volume of extraction, eluent and disperser solvent, pH, adsorbent mass and ultrasonication time has significant influence on methods efficiency. Optimum conditions was set for USA-DSPME as: 1mg CNTs/Zn:ZnO@Ni₂P-NCs; 4min sonication time and 130μL eluent at pH 6.0. Meanwhile optimum point for USA-DLLME conditions were fixed at pH 6.0; 4min sonication time and 130, 650μL and 10mL of extraction solvent (CHCl₃), disperser solvent (ethanol) and sample volume, respectively. Under the above specified best operational conditions, the enrichment factors for the USA-DSPME and USA-DLLME were 88.89 and 147.30, respectively. The methods has linear response in the range of 20.0 to 4000.0ngmL^-1 with the correlation coefficients (r) between 0.9980 to 0.9995, while its reasonable detection limits viz. 1.386 to 2.348ngmL^-1 and good relative standard deviations varied from 1.1% to 2.8% (n=10) candidate this method for successful monitoring of analyte from various media. The relative recoveries of the MG dye from water samples at spiking level of 500ngmL^-1 were in the range between 94.50% and 98.86%. The proposed methods has been successfully applied to the analysis of the MG dye in water samples, and a satisfactory result was obtained.

Physical-chemical characteristics and potential use of a novel alginate/zein hydrogel as the sorption phase for polar organic compounds

A novel alginate based hydrogel was successfully prepared and tested for the solid phase microextraction of medium-to-high polarity compounds, when supported in a polypropylene (PP) fiber. Pure alginate when added onto the surface of the PP fiber, resulted in a significant improvement in the extraction efficiency of the analytes (except for β-estradiol). The alginate hydrogel was modified upon the incorporation of a small amount of zein, a corn protein. Interestingly, the alginate/zein-supported hydrogel was capable of successfully extracting compounds with low partition constant (Kow), such as 17-α-ethinyl estradiol, progesterone and estriol, since the initial water uptake decreased dramatically in this gel, therefore, leaving the alginate hydroxyl groups more available to interact with the polar compounds. In conclusion, this paper presents the preparation of a simple, low cost, reusable, and efficient sorption phase for the extraction of polar compounds with different polarities in aqueous samples, which is a current technological challenge in developing efficient wastewater treatment.

Optimization of ultrasound-assisted dispersive solid-phase microextraction based on nanoparticles followed by spectrophotometry for the simultaneous determination of dyes using experimental design

A simple, low cost and ultrasensitive method for the simultaneous preconcentration and determination of trace amount of auramine-O and malachite green in aqueous media following accumulation on novel and lower toxicity nanomaterials by ultrasound-assisted dispersive solid phase micro-extraction (UA-DSPME) procedure combined with spectrophotometric has been described. The Mn doped ZnS nanoparticles loaded on activated carbon were characterized by Field emission scanning electron microscopy (FE-SEM), particle size distribution, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) analyses and subsequently were used as green and efficient material for dyes accumulation. Contribution of experimental variables such as ultrasonic time, ultrasonic temperature, adsorbent mass, vortex time, ionic strength, pH and elution volume were optimized through experimental design, and while the preconcentrated analytes were efficiently eluted by acetone. Preliminary Plackett-Burman design was applied for selection of most significant factors and giving useful information about their main and interaction part of significant variables like ultrasonic time, adsorbent mass, elution volume and pH were obtained by central composite design combined with response surface analysis and optimum experimental conditions was set at pH of 8.0, 1.2mg of adsorbent, 150μL eluent and 3.7min sonication. Under optimized conditions, the average recoveries (five replicates) for two dyes (spiked at 500.0ngmL(-1)) changes in the range of 92.80-97.70% with acceptable RSD% less than 4.0% over a linear range of 3.0-5000.0ngmL(-1) for the AO and MG in water samples with regression coefficients (R(2)) of 0.9975 and 0.9977, respectively. Acceptable limits of detection of 0.91 and 0.61ngmL(-1) for AO and MG, respectively and high accuracy and repeatability are unique advantages of present method to improve the figures of merit for their accurate determination at trace level in complicated materials.

Quantification of malachite green in fish feed utilising liquid chromatography-tandem mass spectrometry with a monolithic column

The purpose of this study was to develop a rapid and sensitive method for the quantification of malachite green (MG) in fish feed using LC-ESI-MS/MS with a monolithic column as stationary phase. Fish feed was cleaned using ultrasonic assisted liquid-liquid extraction. The separation was achieved on a Chromolith® Performance RP-18e column (100 × 4.6 mm) using gradient mobile phase composition of methanol and 0.1% formic acid at the flow rate of 1.0 ml min⁻¹. The analyte was ionised using electrospray ionisation in positive mode. Mass spectral transitions were recorded in selected reaction monitoring (SRM) mode at m/z 329.78 → m/z 314.75 with a collision energy (CE) of 52% for MG. The system suitability responses were calculated for reproducibility tests of the retention time, number of theoretical plates and capacity factor. System validation was evaluated for precision, specificity and linearity of MG. The linearity and calibration graph was plotted in the range of 15.0-250 ng ml⁻¹ with the regression coefficient of >0.997. The lower limits of detection and quantification for MG were 0.55 and 1.44 ng ml⁻¹, respectively, allowing easy determination in fish feed with accuracy evaluated as a percentage recovery of 92.1% and precision determined as % CV of < 5. The method was also extended to the determination of MG in an actual fish feed. The sensitivity and selectivity of LC-ESI-MS/MS using monolithic column offers a valuable alternative to the methodologies currently employed for the quantification of MG in fish feeds.

Molecularly imprinted polymer for selective extraction of malachite green from seawater and seafood coupled with high-performance liquid chromatographic determination

In this paper, a highly selective sample cleanup procedure combining molecular imprinting technique (MIT) and solid-phase extraction (SPE) was developed for the isolation of malachite green in seawater and seafood samples. The molecularly imprinted polymer (MIP) was prepared using malachite green as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linking monomer. The imprinted polymer and non-imprinted polymer were characterized by scanning electron microscope and static adsorption experiments. The MIP showed a high adsorption capacity and was used as selective sorbent for the SPE of malachite green. An off-line molecularly imprinted solid-phase extraction (MISPE) method followed by high-performance liquid chromatography with diodearray detection for the analysis of malachite green in seawater and seafood samples was also established. Finally, five samples were determined. The results showed that malachite green concentration in one seawater sample was at 1.30 μg L⁻¹ and the RSD (n=3) was 4.15%.

Development and application of chemometric-assisted dispersive liquid-liquid microextraction for the determination of suspected fragrance allergens in water samples

A simple and green method based on dispersive liquid-liquid microextraction, mated to chemometrics and followed by mass spectrometric detection for the determination of suspected fragrance allergens in water samples is developed and assessed in this work. Volume of extraction and disperser solvent, pH, ionic strength, extraction time, sample volume, as well as centrifugation time were initially optimized in a fractional factorial design. The obtained significant factors were optimized by using a central composite design and the quadratic model between the dependent and the independent variables was built. The obtained optimal conditions were: aqueous sample of 3.8 mL, 100 μL chloroform, 1.40 mL acetone, 4 min centrifugation time, natural pH containing 5% (w/v) NaCl, and centrifugation speed 4000 rpm. Method proved to be linear over a wide range of concentration for all analytes with R(2) between 0.9807 and 0.9959. The repeatability and reproducibility of the proposed method, expressed as relative standard deviation, varied between 3-13% and 4-16%, respectively. The limits of detection ranged from 0.007 to 1.0 μg L(-1) . The recommended method was applied to water samples including baby bath as well as swimming pool water samples and was compared with a previously reported method.