Development of a screening method for the analysis of organic pollutants in water using dual stir bar sorptive extraction-thermal desorption-gas chromatography–mass spectrometry

Determination of fipronil and its three degradates in water using stir bar sorptive extraction-thermal desorption-gas chromatography-tandem mass spectrometry

A method was developed for determination of fipronil (FIP) pesticide and its three major degradates (fipronil desulfinyl, fipronil sulfide, fipronil sulfone) in water at the levels required by the EU Commission in the Decision 2022/1307. The method combines solvent-free stir bar sorptive extraction (SBSE) with thermal desorption-gas chromatography-tandem mass spectrometry (TD-GC-MS/MS). Simple sample processing involves 16 h of stirring a 100 mL water sample with a polydimethylsiloxane-coated sorptive stir bar, followed by TD of the trapped analytes into the GC. The greenness assessment by analytical Eco-Scale approach resulted in classification of the entire analytical method as "an excellent green analysis". The obtained limits of quantification for all FIPs determined in tap, lake, MilliQ water and artificial seawater were in the range of 0.12-0.30 ng L-1. The recoveries ranged between 81.7 and 109% with relative standard deviations from 2.8 to 14%. The results show that the method is suitable for screening and monitoring the studied analytes in selected matrices.

Assessment of commercially available polymeric materials for sorptive microextraction of priority and emerging nonpolar organic pollutants in environmental water samples

Among the different organic pollutants, persistent organic pollutants and emerging organic contaminants (EOCs) are of particular concern due to their potentially dangerous effects on the ecosystems and on human health. In the framework of the analysis of some of these organic pollutants in water samples, sorptive extraction devices have proven to be adequate for their monitoring. The efficiency of four commercially available and low-cost polymeric materials [polypropylene, poly(ethylene terephthalate), Raffia, and polyethersulfone (PES)] for the simultaneous extraction of 16 organic compounds from five different families from environmental water samples was evaluated in this work. Firstly, the homogeneity of the sorbent materials was confirmed by means of Raman spectroscopy. After the optimization of the parameters affecting the extraction and the liquid desorption steps, it was found that PES showed the largest efficiencies for slightly polar analytes and, to a lesser extent, for nonpolar analytes. Additionally, Raffia rendered good extraction efficiencies for nonpolar compounds. Thus sorptive extraction methods followed by large volume injection-programmable temperature vaporizer-gas chromatography-mass spectrometry were validated using PES and Raffia as sorbent materials. The validation of the method provided good linearity (0.978 < r (2) < 0.999 for PES and 0.977 < r (2) < 0.999 for Raffia), adequate repeatability (below 19 % and 14 % for PES and Raffia, respectively), and low method detection limits (low ng · l(-1) level). Finally, these materials were applied to the analysis of contaminants in environmental water samples.

Stir bar sorptive extraction: recent applications, limitations and future trends

Stir bar sorptive extraction (SBSE) has generated growing interest due to its high effectiveness for the extraction of non-polar and medium-polarity compounds from liquid samples or liquid extracts. In particular, in recent years, a large amount of new analytical applications of SBSE has been proposed for the extraction of natural compounds, pollutants and other organic compounds in foods, biological samples, environmental matrices and pharmaceutical products. The present review summarizes and discusses the theory behind SBSE and the most recent developments concerning its effectiveness. In addition, the main results of recent analytical approaches and their applications, published in the last three years, are described. The advantages, limitations and disadvantages of SBSE are described and an overview of future trends and novel extraction sorbents and supports is given.

Continental bottled water assessment by stir bar sorptive extraction followed by gas chromatography-tandem mass spectrometry (SBSE-GC-MS/MS)

This study was aimed to determine the presence of 69 organic contaminants in 77 representative bottled waters collected from 27 countries all over the world. All water samples were contained in polyethylene terephthalate bottles. Target compounds were (1) environmental contaminants (including 13 polycyclic aromatic hydrocarbons (PAHs), 31 pesticides including organochlorine (OCPs), organophosphorus, and pyrethroids; 7 polychlorinated biphenyls (PCBs); and 7 triazines) and (2) plasticizers (including 6 phthalates and 5 other compounds). Samples were analyzed by stir bar sorptive extraction followed by gas chromatography-tandem mass spectrometry. PAHs, OCPs, PCBs, and triazines, which are indicators of groundwater pollution, were not detected in most of the samples, except for naphthalene (0.005-0.202 μg/L, n = 16). On the other hand, plastic components were detected in 77 % of the samples. Most frequently detected compounds were dimethyl phthalate and benzophenone at concentrations of 0.005-0.125 (n = 41) and 0.014-0.921 (n = 32), respectively. Levels detected are discussed in terms of contamination origin and geographical distribution. Target compounds were detected at low concentrations. Results obtained showed the high quality of bottled water in the different countries around the world.

Analysis of the volatile components emitted from cut tobacco processing by gas chromatography/mass spectrometry thermal desorption system

A sensitive and reliable method was developed for the determination of volatile components emitted from cut tobacco processing using thermal desorption (TD) followed by gas chromatography-mass spectrometry (GC-MS). In the work, to obtain the optimal sorbent, three commercial sorbents were compared in terms of adsorption efficiency. The carbotrap 349 was found to have the best performance. The desorption conditions were also studied. Validation of the TD-GC-MS method showed good sensibility, linearity and precision. Limits of detection ranges were from 0.20 to 3.6 ng. Calibration curves were obtained by plotting peak area versus concentration and the correlation coefficients relating to linearity were at least 0.9984. The analysis was reproducible, with relative standard deviation (n=8) within 6.5%. The target compound breakthrough examination showed no significant losses when about 1500 ng standards were prepared. In order to evaluate the performance of the analytical method in the volatile constituents of cut tobacco, samples were taken in industrial areas of cut tobacco processing. Recoveries ranged from 85.1% to 110% for all the compounds and good precision had been reached (RSD<13.3). The results proved that TD-GC-MS was a simple, rapid and accurate method for the analysis of volatile compounds emitted from cut tobacco drying step.