A novel solid-state Ru(bpy)32+ electrochemiluminescence immunosensor based on poly(ethylenimine) and polyamidoamine dendrimers as co-reactants

Ultrasensitive Electrochemiluminescence Biosensor to Detect Ampicillin Resistance Gene (ARGAMP) Based on a Novel Near-Infrared Ruthenium Carbene Complex/TPrA/PEI Ternary ECL System

The establishment of rapid target identification and analysis methods for antibiotic resistance genes (ARGs) is urgently needed. In this study, we unprecedently designed a target-catalyzed hairpin assembly (CHA) electrochemiluminescent (ECL) biosensor for the ultrasensitive detection of ampicillin resistance genes (ARGAMP) based on a novel, efficient near-infrared ruthenium carbene complex/TPrA/PEI ternary ECL system with low oxidation potential. The ternary NIR-ECL system illustrated in this work displayed double ECL intensity in comparison with their corresponding traditional binary ECL system. The as-prepared ECL biosensor illustrated in this work demonstrates highly selective and sensitive determination of ARGAMP from 1 fM to 1 nM and a low detection limit of 0.23 fM. Importantly, it also exhibits good accuracy and stabilities to identify ARGAMP in plasmid and bacterial genome DNA, which demonstrates its excellent reliability and great potential in detecting ARGAMP in real environmental samples.

High -Sensitive Detection of Malachite Green Based on Surface-Enhanced Electrochemiluminescence

This article introduces a novel unlabeled surface-enhanced electrochemiluminescence (SEECL) sensor for malachite green (MG) detection. The SEECL sensor was prepared by modifying the Ru(bpy)32+ doped gold-SiO2 core-shell nanocomposites (Au@SiO2-Ru(bpy)32+) on the gold electrode. Ru(bpy)32+ of nanocomposites can not only emit electrochemiluminescence (ECL) with electrochemical reaction, but also induce the local surface plasmon resonance (LSPR) of gold core. That is beneficial to enhance the ECL signa of sensor. However, in the existence of MG, the luminescence of sensor would be quenched by the fluorescence resonance energy transfer (FRET) between MG and Ru(bpy)32+. In this paper, both fluorescence and ECL of the Au@SiO2-Ru(bpy)32+ were investigated for MG detection. And the results show that the SEECL sensor has high sensitive to MG. Under the optimal experimental conditions, the minimum detection concentration could be achieved about 1.0 nM of MG, which fully meets the China national standard detection requirements of veterinary drug residue in seafood.

Signal-amplified electrochemiluminescence aptasensor for mucin 1 determination using CdS QDs/g-C3N4 and Au NPs@TEOA

A novel electrochemiluminescence (ECL) aptasensor, using graphite carbonitride (g-C₃N₄) capped CdS quantum dots (CdS QDs@g-C₃N₄) and Au nanoparticles decorated triethanolamine (AuNPs@TEOA) as dual coreactants, was proposed for the determination of mucin 1 (MUC1). Higher ECL efficiency was acquired due to the double enhancement contribution of CdS QDs and TEOA to Ru (bpy)₃²⁺ ECL. Additionally, AuNPs@TEOA also acted as nanocarrier for MUC1 aptamer immobilization. After the aptasensor was incubated in target MUC1, the decreased ECL emission was obtained because of the poor conductivity of MUC1. The ECL aptasensor displayed a good linear correlation for MUC1 in the range 0.1 pg mL^-1 -1000 ng mL^-1, and the detection limit was 33 fg mL^-1. MUC1 spiked into human serum samples was quantified to assess the practicability of the ECL aptasensor.

Significance of Capping Agents of Colloidal Nanoparticles from the Perspective of Drug and Gene Delivery, Bioimaging, and Biosensing: An Insight

The over-growth and coagulation of nanoparticles is prevented using capping agents by the production of stearic effect that plays a pivotal role in stabilizing the interface. This strategy of coating the nanoparticles’ surface with capping agents is an emerging trend in assembling multipurpose nanoparticles that is beneficial for improving their physicochemical and biological behavior. The enhancement of reactivity and negligible toxicity is the outcome. In this review article, an attempt has been made to introduce the significance of different capping agents in the preparation of nanoparticles. Most importantly, we have highlighted the recent progress, existing roadblocks, and upcoming opportunities of using surface modified nanoparticles in nanomedicine from the drug and gene delivery, bioimaging, and biosensing perspectives.

Encapsulating Ru(bpy)32+ in an infinite coordination polymer network: Towards a solid-state electrochemiluminescence sensing platform for histamine to evaluate fish product quality

In this work, we demonstrate a novel solid-state electrochemiluminescence (ECL) sensor based on the Ru(bpy)₃²⁺@terbium-guanosine monophosphate infinite coordination polymer network ((Ru(bpy)₃²⁺@Tb-GMP ICPn). Comparing with the traditional luminescence of Ru(bpy)₃²⁺ observed in a liquid system, the proposed method of encapsulating Ru(bpy)₃²⁺ into ICPn for immobilization greatly improves the ECL signal and efficiency, which is attributed to the unique porous structure and large specific surface area of ICPn. Moreover, the solid-state Ru(bpy)₃²⁺ ECL sensor has good biocompatibility and low toxicity. Taking histamine (HA) as a detection model, a good linear relationship between ECL intensity and logarithm of HA concentration was obtained with a low detection limit of 17 nM, and satisfactory results were obtained for detecting HA levels in fish samples as well. The proposed solid-state Ru(bpy)₃²⁺ ECL sensor has great application prospects in the safety of food.

An Electrochemical Immunosensor Based on SPA and rGO-PEI-Ag-Nf for the Detection of Arsanilic Acid

A sensitive electrochemical immunosensor was prepared for rapid detection of ASA based on arsanilic acid (ASA) monoclonal antibody with high affinity. In the preparation of nanomaterials, polyethyleneimine (PEI) improved the stability of the solution and acted as a reducing agent to generate reduced graphene oxide (rGO) with relatively strong conductivity, thereby promoting the transfer of electrons. The dual conductivity of rGO and silver nanoparticles (AgNPs) improved the sensitivity of the sensor. The synthesis of nanomaterials were confirmed by UV-Vis spectroscopy, X-ray diffraction, transmission electron microscopy and scanning electron microscopy. In the optimal experiment conditions, the sensor could achieve the detection range of 0.50–500 ng mL⁻¹ and the limit of detection (LOD) of 0.38 ng mL⁻¹ (S/N = 3). Moreover, the sensor exhibited excellent specificity and acceptable stability, suggesting that the proposed sensor possessed a good potential in ASA detection. Thus, the as-prepared biosensor may be a potential way for detecting other antibiotics in meat and animal-derived foods.

Electrochemical and Electrochemiluminescence Dendrimer-based Nanostructured Immunosensors for Tumor Marker Detection: A Review

The usage of dendrimers or cascade molecules in the biomedical area has recently attracted much attention worldwide. Furthermore, dendrimers are interesting in clinical and pre-clinical applications due to their unique characteristics. Cancer is one of the most widespread challenges and important diseases, which has the highest mortality rate. In this review, the recent advances and developments (from 2009 up to 2019) in the field of electrochemical and electroluminescence immunosensors for detection of the cancer markers are presented. Moreover, this review covers the basic fabrication principles and types of electrochemical and electrochemiluminescence dendrimer-based immunosensors. In this review, we have categorized the current dendrimer based-electrochemical/ electroluminescence immunosensors into five groups: dendrimer/ magnetic particles, dendrimer/ferrocene, dendrimer/metal nanoparticles, thiol-containing dendrimer, and dendrimer/quantum dots based-immunosensors.

Electrochemiluminescence-Incorporated Lateral Flow Immunosensors Using Ru(bpy)32+-Labeled Gold Nanoparticles for the Full-Range Detection of Physiological C-Reactive Protein Levels

C-reactive protein (CRP) is used as a general biomarker for inflammation and infection. During stroke and myocardial infarction, CRP increases and is present in a broad concentration range of 1-500 μg/mL. Therefore, full-range CRP detection is crucial to identify patients who need close follow-up or intensive treatment after a heart attack. Here, we report the first attempt to develop an electrochemiluminescent lateral flow immunosensor (ECL-LFI) that allows full-range CRP detection. Ru(bpy)₃²⁺-labeled gold nanoparticles (AuNPs) are used as a CRP-targeting probe and a signal generator; they form sandwich immunocomplexes at the test line of the strip and generate strong ECL emission via a Ru(bpy)₃²⁺/tripropylamine system. The ECL-LFI shows high sensitivity in detecting CRP in spiked serum, with a limit of detection of 4.6 pg/mL within 15 min, and a broad detection range of 0.01-1000 ng/mL, which is 2 orders of magnitude broader than that of conventional colorimetric LFI. The clinical usability of the ECL-LFI was evaluated using 30 clinical serum samples (200 ng/mL to 5 mg/mL), which showed a good linear correlation (R² = 0.9896), with a clinical chemistry analyzer. The results suggest that the ECL-LFI holds great potential for CRP detection in point-of-care diagnostics.

Amine-terminated dendritic polymers as promising nanoplatform for diagnostic and therapeutic agents' modification: A review

It is often challenging to design diagnostic and therapeutic agents that fulfill all functional requirements. So, bulk and surface modifications as a common approach for biomedical applications have been suggested. There have been considerable research interests in using nanomaterials to the prementioned methods. Among all nanomaterials, dendritic materials with three-dimensional structures, host-guest properties, and nano-polymeric dimensions have received considerable attention. Amine-terminated dendritic structures including, polyamidoamine (PAMAM), polypropyleneimine (PPI), and polyethyleneimine (PEI), have been enormously utilized in bio-modification. This review briefly described the structure of these three common dendritic polymers and their use to modify diagnostic and therapeutic agents in six major applications, including drug delivery, gene delivery, biosensor, bioimaging, tissue engineering, and antimicrobial activity. The current review covers amine-terminated dendritic polymers toxicity challenging and improvement strategies as well.

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

Monitoring zearalenone in corn flour utilizing novel self-enhanced electrochemiluminescence aptasensor based on NGQDs-NH2-Ru@SiO2 luminophore

Accurate and early diagnosis of mycotoxin is particularly significant to the food and agricultural product safety. In the present work, a sensitive and effective monitoring method for zearalenone (ZEN) was exploited based on a novel self-enhanced electrochemiluminescence (ECL) aptasensor. The self-enhanced lumonophore was compounded by electrostatically combining amine-functionalized Ru(bpy)₃²⁺-doped silica nanoparticles (NH₂-Ru@SiO₂ NPs) and nitrogen doped graphene quantum dots (NGQDs) together. Since the emitter and co-reactant simultaneously existed in the same nanoparticle, shortened electron-transfer distance and decreased energy loss was obtained. Therefore, self-enhanced ECL aptasensor based on the novel complex expressed the widest linear range of 10 fg mL^-1-10 ng mL^-1 and the lowest detection limit of 1 fg mL^-1 for ZEN detection. More importantly, ZEN produced during the mildew process of corn flour was monitored by the developed aptasensor, which exhibited superior determination and potential application in real samples.

Graphene oxide-based electrochemical activation of ethionamide towards enhanced biological activity

The electrochemical behavior of ethionamide (ETO) was investigated on GO (∼500 nm) using the linear sweep voltammetric (LSV) technique at the sweep rate of 10 mV s⁻¹ in 1 M PBS buffer solution, and the characteristic anodic signal was examined at 0.240 V over the potential range of −0.4 to 1 V vs. SCE. However, linearity was observed with the increase in scan rate (2–300 mV s⁻¹) and concentration of ETO (1 μM to 100 mM), suggesting that the process involved diffusion-controlled electron transfer. The results also exhibited excellent current and potential stability, limit of detection (LOD 1.33) and limit of quantification (LOQ 4.4) at optimized experimental conditions. This electrochemical oxidation method was successfully applied in the complete oxidation of ETO to its oxidized form, which was further confirmed by high resolution mass spectroscopy (HRMS) and Fourier transform infrared (FTIR) spectroscopic measurements. Interestingly, the comparative biological evaluation of ETO and ETO-O (oxidised form) showed good enhancement in the activity of oxidised ETO against some Gram-negative pathogens, such as E. aerogenes, S. abony, S. boydii, and E. coli.

Electrochemical oxidative activation of ethionamide (ETO) on GO (∼500 nm) confirmed by HRMS and FTIR analysis. The ETO-O (oxidized form) showed enhancement in activity over ETO against Gram negative pathogens (E. aerogenes, S. abony, S. boydii, E. coli).

Sandwich-Type Electrochemiluminescence Sensor for Detection of NT-proBNP by Using High Efficiency Quench Strategy of Fe3O4@PDA toward Ru(bpy)32+ Coordinated with Silver Oxalate

Heart failure (HF) is a burgeoning public health problem trigged by a heart circulation disorder. N-terminal pro-B-type natriuretic peptide (NT-proBNP) has been acknowledged as a prognostic biomarker for cardiac disease. Herein, a sandwich-type electrochemiluminescence (ECL) immunosensor was introduced for sensitive detection of NT-proBNP. Gold nanoparticle modified graphene oxide-Ru(bpy)₃²⁺/Ag₂C₂O₄ was used as a luminophore and a desirable platform for immobilization of the captured antibodies. The more stable immobilization of plentiful Ru(bpy)₃²⁺ could be implemented by direct covalent bonding chelation with Ag₂C₂O₄. More importantly, significant quenching can be achieved by introducing polydopamine (PDA) coated Fe₃O₄ onto the electrode via sandwich immunoreactions. The quenching mechanism mainly showed that the excited states of Ru(bpy)₃²⁺ could be annihilated by quinone units in PDA via energy transfer. The ECL quenching efficiency was logarithmically related to the concentration of the NT-proBNP in the range from 0.0005 ng/mL to 100.0 ng/mL with a detection limit of 0.28 pg/mL. Furthermore, this specific immunosensor presented good stability and repeatability as well as selectivity, which offers a guiding significance in both fundamental and clinical diagnosis of NT-proBNP.

Noble metal nanoparticles in biosensors: recent studies and applications

The aim of this review is to cover advances in noble metal nanoparticle (MNP)-based biosensors and to outline the principles and main functions of MNPs in different classes of biosensors according to the transduction methods employed. The important biorecognition elements are enzymes, antibodies, aptamers, DNA sequences, and whole cells. The main readouts are electrochemical (amperometric and voltametric), optical (surface plasmon resonance, colorimetric, chemiluminescence, photoelectrochemical, etc.) and piezoelectric. MNPs have received attention for applications in biosensing due to their fascinating properties. These properties include a large surface area that enhances biorecognizers and receptor immobilization, good ability for reaction catalysis and electron transfer, and good biocompatibility. MNPs can be used alone and in combination with other classes of nanostructures. MNP-based sensors can lead to significant signal amplification, higher sensitivity, and great improvements in the detection and quantification of biomolecules and different ions. Some recent examples of biomolecular sensors using MNPs are given, and the effects of structure, shape, and other physical properties of noble MNPs and nanohybrids in biosensor performance are discussed.

PAMAM dendrimers: A multifunctional nanomaterial for ECL biosensors

Polyamido amine (PAMAM) dendrimers have been shown to function as electrochemiluminescence (ECL) co-reactant and have the inherent capability of improving immobilization of molecules on surfaces due to their dendritic structure. Here, we investigated the combination of both of these properties as the basis for biosensor development. Dendrimers with 5, 8, 10 and 16 terminal amine groups, respectively, were used. These were covalently coupled to biotin as model recognition site, and tagged with Ru(bpy)₃²⁺ via adsorption. Due to their hydrophilicity, Ru-dendrimers showed significantly improved electrochemical activity in comparison to the standard tripropylamine (TPA) assisted ECL and similar luminescence yields even though 10 fold less dendrimer concentration was required in comparison to TPA. Best signals were obtained for D8 and D10 dendrimers. These Ru-dendrimers were subsequently used for the quantification of streptavidin, as its binding to the biotin-tag caused a proportional decrease in ECL signal with a dynamic range of 5nM to 1μM. These preliminary studies demonstrate that PAMAM dendrimers can function as responsive signal generators in solution-based ECL-bioassays with an assumed even higher impact when being immobilized directly on the electrode-surface.

Determination of pentachlorophenol by anodic electrochemiluminescence of Ru(bpy)32+ based on nitrogen-doped graphene quantum dots as co-reactant

A novel ultrasensitive Ru(bpy)₃²⁺-based anodic ECL sensor using NGQDs as co-reactant was developed for PCP detection.