Development of a MSFIA sample treatment system as front end of GC–MS for atenolol and propranolol determination in human plasma

Applications of chromatographic methods in metabolomics: A review

Chromatography is a robust and reliable separation method that can use various stationary phases to separate complex mixtures commonly seen in metabolomics. This review examines the types of chromatography and stationary phases that have been used in targeted or untargeted metabolomics with methods such as mass spectrometry (MS) and nuclear magnetic resonance (NMR) spectroscopy. General considerations for sample pretreatment and separations in metabolomics are considered, along with the various supports and separation formats for chromatography that have been used in such work. The types of liquid chromatography (LC) that have been most extensively used in metabolomics will be examined, such as reversed-phase liquid chromatography and hydrophilic liquid interaction chromatography. In addition, other forms of LC that have been used in more limited applications for metabolomics (e.g., ion-exchange, size-exclusion, and affinity methods) will be discussed to illustrate how these techniques may be utilized for new and future research in this field. Multidimensional LC methods are also discussed, as well as the use of gas chromatography and supercritical fluid chromatography in metabolomics. In addition, the roles of chromatography in NMR- vs. MS-based metabolomics are considered. Applications are given within the field of metabolomics for each type of chromatography, along with potential advantages or limitations of these separation methods.

Recognition of chiral propranolol by fluorescent aptamerlight switch based on GO

In this work, specific aptamers with affinity for S-propranolol were screened by SELEX technology based on the graphene oxide (GO) adsorption platform, and a GO-FAM labeled aptamer-propranolol fluorescent optical switch system was constructed for the recognition of chiral propranolol. It was found that the fluorescence quenching of FAM labeled aptamer could be caused by the adsorption of GO. However, when S-propranolol was introduced, S-propranolol could pull out the aptamer adsorbed by GO, and the fluorescence of the system could be restored. But, R-propranolol could not be realized. Therefore, a simple and sensitive fluorescent optical switch system was established to identify chiral propranolol and perform highly sensitive detection of S-propranolol.

Screening and quantification of 146 veterinary drug residues in beef and chicken using QuEChERS combined with high performance liquid chromatography-quadrupole orbitrap mass spectrometry

This work aimed to develop an integrated high-throughput screening and quantification for multi-class veterinary drug residues by HPLC-Q-Orbitrap mass spectrometry. A qualitative screening mass database of 171 veterinary drugs was created using full scanning mode, which improved the screening accuracy and scope. Beef and chicken samples were chosen to validate the quantification method at three spiked concentration levels. The quantification method of 146 veterinary drug residues was developed. After enzymatic hydrolysis, beef and chicken samples were treated using optimized QuEChERS. The calibration curves showed good linearities with correlation coefficients of 0.9921-0.9994. The recovery rates were within 52.1-138.2 % with relative standard deviations 0.4-17.7 %. The limits of detection and limits of quantification were in the range of 0.15-3.03 μg/kg and 0.5-10 μg/kg, respectively. The proposed method was demonstrated to be reliable for the simultaneous analysis of multi-class veterinary drugs. It is of significance to expand the screening scope and quantitative analysis efficiency.

Chemical Derivatization in Flow Analysis

Chemical derivatization for improving selectivity and/or sensitivity is a common practice in analytical chemistry. It is particularly attractive in flow analysis in view of its highly reproducible reagent addition(s) and controlled timing. Then, measurements without attaining the steady state, kinetic discrimination, exploitation of unstable reagents and/or products, as well as strategies compliant with Green Analytical Chemistry, have been efficiently exploited. Flow-based chemical derivatization has been accomplished by different approaches, most involving flow and manifold programming. Solid-phase reagents, novel strategies for sample insertion and reagent addition, as well as to increase sample residence time have been also exploited. However, the required alterations in flow rates and/or manifold geometry may lead to spurious signals (e.g., Schlieren effect) resulting in distorted peaks and a noisy/drifty baseline. These anomalies can be circumvented by a proper flow system design. In this review, these aspects are critically discussed mostly in relation to spectrophotometric and luminometric detection.

Application of MIL-53(Al) prepared from waste materials for solid-phase microextraction of propranolol followed by corona discharge-ion mobility spectrometry (CD-IMS)

In this study, MIL-53(Al) metal-organic framework was prepared from waste raw materials. A polyethylene terephthalate (PET) plastic bottle was used as the source of terephthalic acid, and an aluminium beverage can was applied as the precursor of aluminium salt. The activated MIL-53(Al) was immobilized onto a stainless steel probe of the ion mobility spectrometer (IMS), and the coated probe was used for solid-phase microextraction of propranolol from biological samples before determination. The effect of the different parameters such as pH, ionic strength, and stirring rate of the sample, extraction time, and temperature was studied on the extraction efficiency of propranolol. The linearity was obtained ranging from 5-200 μg L^-1 with a determination coefficient (R²) of 0.9988, and the detection limit was calculated 1.7 μg L^-1 in the water sample. The relative standard deviations of the method were in the range of 2.5-12.2 %. Finally, the method was utilized for determination of propranolol in the tablet sample.

The role of graphene oxide and graphene oxide-based nanomaterials in the removal of pharmaceuticals from aqueous media: a review

In this review paper, the ill effects of pharmaceuticals (PhAs) on the environment and their adsorption on graphene oxide (GO) and graphene oxide-based (GO-based) nanomaterials have been summarised and discussed. The adsorption of prominent PhAs discussed herein includes beta-blockers (atenolol and propranolol), antibiotics (tetracycline, ciprofloxacin and sulfamethoxazole), pharmaceutically active compounds (carbamazepine) and analgesics such as diclofenac. The adsorption of PhAs strictly depends upon the experimental conditions such as pH, adsorbent and adsorbate concentrations, temperature, ionic strength, etc. To understand the adsorption mechanism and feasibility of the adsorption process, the adsorption isotherms, thermodynamics and kinetic studies were also considered. Except for some cases, GO and its derivatives show excellent adsorption capacities for PhAs, which is crucial for their applications in the environmental pollution cleanup.

Recent advances in flow injection analysis

A dynamic development of methodologies of analytical flow injection measurements during four decades since their invention has reinforced the solid position of flow analysis in the arsenal of techniques and instrumentation of contemporary chemical analysis.

Sensitive CE-ECL method with AuNPs-enhanced signal for the detection of β-blockers and the study of drug–protein interactions

A sensitive capillary electrophoresis (CE) system coupled with electrochemiluminescence (ECL) of tris(2,2′-bipyridyl) ruthenium (ii) is described for the detection of propranolol (Pro) and acebutolol (Ace).

Removal of beta-blockers from aqueous media by adsorption onto graphene oxide

The aim of the present study is the evaluation of graphene oxide (GhO) as adsorbent material for the removal of beta-blockers (pharmaceutical compounds) in aqueous solutions. The composition and morphology of prepared materials were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Atenolol (ATL) and propranolol (PRO) were used as model drug molecules and their behavior were investigated in terms of GhO dosage, contact time, temperature and pH. Adsorption mechanisms were proposed and the pH-effect curves after adsorption were discussed. The kinetic behavior of GhO-drugs system was analyzed after fitting to pseudo-first and -second order equations. The adsorption equilibrium data were fitted to Langmuir, Freundlich and Langmuir-Freundlich model calculating the maximum adsorption capacity (67 and 116 mg/g for PRO and ATL (25 °C), respectively). The temperature effect on adsorption was tested carrying out the equilibrium adsorption experiments at three different temperatures (25, 45, 65 °C). Then, the thermodynamic parameters of enthalpy, free energy and entropy were calculated. Finally, the desorption of drugs from GhO was evaluated by using both aqueous eluants (pH2-10) and organic solvents.