Square wave voltammetric detection by direct electroreduction of paranitrophenol (PNP) using an organosmectite film-modified glassy carbon electrode

Sensitive determination of 4,6-dinitro-o-cresol based on a glassy carbon electrode modified with Zr-UiO-66 metal-organic framework entrapped FMWCNTs

A DNOC electrochemical sensor has been developed by using a composite of Zr-UiO-66 and FMWCNTs on a glassy carbon electrode (GCE) and using the differential pulse voltammetry technique. The synthesized materials were physico-chemically characterized by BET, PXRD, FTIR, TGA, EDX, and FESEM. Cyclic voltammetry showed that DNOC has three oxidation peaks at 0.03 V (RSD: 0.23%), 0.42 V (RSD: 0.21%), and 1.32 V (RSD: 0.32%) and three reduction peaks at - 0.20 V (RSD: 0.15%), - 0.82 V (RSD: 0.26%), and - 1.14 V (RSD: 0.19%) which follow a diffusion-controlled mechanism. Different parameters were optimized using differential pulse voltammetry and good linear ranges were found for the simultaneous detection of the three reduction peaks. For a specific concentration range of 0.1-50 μM, a limit of detection of 0.119 μM based on 3Sb/m was obtained. The interfering effects of five non-phenolic pesticides and five heavy metals were evaluated to highlight the selectivity of the developed sensor. It is the first report of an electrochemical DNOC sensor in which all three oxidation peaks are prominently visible. Ethion and chloropyriphos were found to inhibit the redox process of DNOC on the developed sensor platform Zr-UiO-66/FMWCNT/GCE. The sensor was successfully applied to DNOC determination in spiked potato samples and the results showed a standard deviation of less than 3%. The proposed method is expected to provide a novel platform for the quantitative determination of DNOC pesticides in vegetables.

An efficient differential sensing strategy for phenolic pollutants based on the nanozyme with polyphenol oxidase activity

To realize the efficient differential sensing of phenolic pollutants in sewage, a novel sensing strategy was successfully developed based on one nanozyme (GMP-Cu) with polyphenol oxidase activity. Phenolic pollutants can be oxidized by GMP-Cu, and the oxidation products reacts subsequently with 4-aminoantipyrine to produce a quinone-imine compound. The absorption spectra of final quinone-imine products resulted from different phenolic pollutants showed obvious differences, which were due to the interaction difference between GMP-Cu and phenolic pollutants, as well as the different molecular structures of the quinone-imine products from different phenolic pollutants. Based on the difference of absorption spectra, a novel differential sensing strategy was developed. The genetic algorithm was used to select the characteristic wavelengths at different enzymatic reaction times, HCA and PLS-DA algorithms were utilized for the discriminant sensing of seven representative phenolic pollutants, including hydroquinone, resorcinol, catechol, resorcinol, phenol, p-chlorophenol, and 2,4-dichlorophenol. Scientific wavelength selection algorithm and recognition algorithm resulted in the successful identification of phenolic pollutants in sewage with a discriminant accuracy of 100%, and differentiation of the phenolic pollutants regardless of their concentration. These results indicate that sensing strategy can be used as an effective tool for the efficient identification and differentiation of phenolic pollutants in sewage.

A Microbial Electrochemical Technology to Detect and Degrade Organophosphate Pesticides

Organophosphate (OP) pesticides cause hundreds of illnesses and deaths annually. Unfortunately, exposures are often detected by monitoring degradation products in blood and urine, with few effective methods for detection and remediation at the point of dispersal. We have developed an innovative strategy to remediate these compounds: an engineered microbial technology for the targeted detection and destruction of OP pesticides. This system is based upon microbial electrochemistry using two engineered strains. The strains are combined such that the first microbe (E. coli) degrades the pesticide, while the second (S. oneidensis) generates current in response to the degradation product without requiring external electrochemical stimulus or labels. This cellular technology is unique in that the E. coli serves only as an inert scaffold for enzymes to degrade OPs, circumventing a fundamental requirement of coculture design: maintaining the viability of two microbial strains simultaneously. With this platform, we can detect OP degradation products at submicromolar levels, outperforming reported colorimetric and fluorescence sensors. Importantly, this approach affords a modular, adaptable strategy that can be expanded to additional environmental contaminants.

A new sensor based on an amino-montmorillonite-modified inkjet-printed graphene electrode for the voltammetric determination of gentisic acid

An amperometric sensor based on an inkjet-printed graphene electrode (IPGE) modified with amine-functionalized montmorillonite (Mt-NH₂) for the electroanalysis and quantification of gentisic acid (GA) has been developed. The organoclay used as IPGE modifier was prepared and characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy, CHN elemental analysis, and thermogravimetry. The electrochemical features of the Mt-NH₂/IPGE sensor were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The sensor exhibited charge selectivity ability which was exploited for the electrochemical oxidation of GA. The GA amperometric response was high in acidic medium (Brinton-Robinson buffer, pH 2) due to favorable interactions between the protonated amine groups and the negatively charged GA. Kinetic studies were also performed by cyclic voltammetry, and the obtained electron transfer rate constant of 11.3 s^-1 indicated a fast direct electron transfer rate of GA to the electrode. An approach using differential pulse voltammetry was then developed for the determination of GA (at + 0.233 V vs. a pseudo Ag/Ag⁺ reference electrode), and under optimized conditions, the sensor showed high sensitivity, a wide working linear range from 1 to 21 μM (R² = 0.999), and a low detection limit of 0.33 μM (0.051 ± 0.01 mg L^-1). The proposed sensor was applied to quantify GA in a commercial red wine sample. The simple and rapid method developed using a cheap clay material could be employed for the determination of various phenolic acids.

Designing nanoarchitecture for environmental remediation based on the clay minerals as building block

Nanoarchitecture of hybrids materials based on clay minerals as nano building blocks for the environmental remediation is summarized with the emphasis on the utilization of layered clay minerals, especially smectite group of clay minerals, as nano building blocks for designing functional nanostructures for the adsorption of molecular contaminants from the environments. Smectites are well-known adsorbents of cationic contaminants, while surface modification of smectites with organoammonium ions has given hydrophobic and microporous characters to uptake nonionic organic contaminants from environments. Not only on the designed interactions between adsorbent-adsorbate for efficient and higher capacity adsorption, the states of the adsorbed nonionic organic compounds have been altered and varied by the modification of smectites as shown by the controlled release and specific catalytic reactions. The organically modified clays are classified from the nanoarchitecture, and the functions derived from the nanoarchitectures are discussed based on the structure-property relationship.

Facile synthesis of CoxP decorated porous carbon microspheres for ultrasensitive detection of 4-nitrophenol

A novel cobalt phosphide (Co_xP, a mixture of CoP and Co₂P) embedded within nitrogen-doped porous carbon microspheres was facilely prepared by pyrolysis of a composite precursor. The composite precursor was achieved by in-situ growth of Co-based zeolitic imidazolate framework (ZIF-67) on the Zn(PO₄)_x microspheres. The as-prepared Co_xP decorated nitrogen-doped porous carbon microspheres (Co_xP/NC) possess uniform distribution of graphite-encapsulated Co_xP, a large surface area (826m²g^-1) and abundant mesopores. It was found the Co_xP/NC exhibited excellent electrocatalytic performances toward 4-nitrophenol (4-NP). Therefore, Co_xP/NC was developed to fabricate an ultrasensitive electrochemical sensor for 4-NP by using differential pulse voltammetry (DPV). In comparison with glassy carbon electrode (GCE) and nitrogen-doped carbon (NC) modified GCE, the Co_xP/NC modified GCE (Co_xP/NC/GCE) showed a remarkable increase in DPV current toward 4-NP. Under optimized condition, an ultrahigh sensitivity of 20.9 (μA μmol^-1 L) and a low detection limit of 2 × 10^-9molL^-1 (at a signal-to-noise ratio of 3, S/N = 3) for 4-NP were achieved. Additionally, the Co_xP/NC/GCE was successfully applied to detect 4-NP in tap water with good recoveries for its attractive selectivity and repeatability, which indicated that Co_xP/NC could be a promising candidate for analyzing 4-NP.