Ultrasensitive electrochemical immunosensor for quantitative detection of tumor specific growth factor by using Ag@CeO2 nanocomposite as labels

Label-free electrochemical immunosensor based on staphylococcal protein a and AgNPs-rGO-Nf for sensitive detection of virginiamycin M1

Virginiamycin (VIR), a feed additive, is used to promote pig and poultry growth. However, it is hazardous to human health. This work described a label-free electrochemical immunosensor based on silver nanoparticles-reduced graphene oxide (AgNPs-rGO) nanocomposites and staphylococcal protein A (SPA) for the first time to directly detect the residual marker VIR M1. Good catalytic currents for oxygen reduction reaction were apparently obtained after the modification of nanocomposites on gold electrode. Nanocomposites were characterized using UV-Vis, X-ray diffraction (XRD) patterns, Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). SPA was targeted to immobilize VIR M1 monoclonal antibody (mAb) by binding to Fc region of antibody. The proposed immunosensor showed a wide linear range from 0.25 ng mL^-1 to 100 ng mL^-1, providing detection limit (LOD) of 0.18 ng mL^-1 of VIR M1. Recovery rates ranged from 92.27% to 98.84%, and relative standard deviation (RSD) was not above 6.6%, indicating the immunosensor could detect VIR M1 in actual samples with high accuracy. The sensor showed good selectivity, reproducibility and stability and could be considered as a potential tool for detection of VIR M1 in feed and animal derived food.

Functionalized Titanium Dioxide Nanoparticle-Based Electrochemical Immunosensor for Detection of SARS-CoV-2 Antibody

The advancement in biosensors can overcome the challenges faced by conventional diagnostic techniques for the detection of the highly infectious severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Hence, the development of an accurate, rapid, sensitive, and selective diagnostic technique can mitigate adverse health conditions caused by SARS-CoV-2. This work proposes the development of an electrochemical immunosensor based on bio-nanocomposites for the sensitive detection of SARS-CoV-2 antibodies through the differential pulse voltammetry (DPV) electroanalytical method. The facile synthesis of chitosan-functionalized titanium dioxide nanoparticles (TiO2-CS bio-nanocomposites) is performed using the sol-gel method. Characterization of the TiO2-CS bio-nanocomposite is accomplished using UV-vis spectroscopy, Raman spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The electrochemical performance is studied using cyclic voltammetry (CV), DPV, and electrochemical impedance spectroscopy (EIS) for its electroanalytical and biosensing capabilities. The developed immunosensing platform has a high sensitivity with a wide range of detection from 50 ag mL-1 to 1 ng mL-1. The detection limit of the SARS-CoV-2 antibody in buffer media is obtained to be 3.42 ag mL-1 and the limit of quantitation (LOQ) to be 10.38 ag mL-1. The electrochemical immunosensor has high selectivity in different interfering analytes and is stable for 10 days. The results suggest that the developed electrochemical immunosensor can be applicable for real sample analysis and further high-throughput testing.

Advanced applications of cerium oxide based nanozymes in cancer

Cerium oxide nanozymes have emerged as a new type of bio-antioxidants in recent years. CeO2 nanozymes possess enzyme mimetic activities with outstanding free radical scavenging activity, facile synthesis conditions, and excellent biocompatibility. Based on these extraordinary properties, use of CeO2 nanozymes has been demonstrated to be a highly versatile therapeutic method for many diseases, such as for inflammation, rheumatoid arthritis, hepatic ischemia-reperfusion injury and Alzheimer's disease. In addition to that, CeO2 nanozymes have been widely used in the diagnosis and treatment of cancer. Many examples can be found in the literature, such as magnetic resonance detection, tumour marker detection, chemotherapy, radiotherapy, photodynamic therapy (PDT), and photothermal therapy (PTT). This review systematically summarises the latest applications of CeO2-based nanozymes in cancer research and treatment. We believe that this paper will help develop value-added CeO2 nanozymes, offering great potential in the biotechnology industry and with great significance for the diagnosis and treatment of a wide range of malignancies.

Nanoceria, the versatile nanoparticles: Promising biomedical applications

Nanotechnology has been a boon for the biomedical field due to the freedom it provides for tailoring of pharmacokinetic properties of different drug molecules. Nanomedicine is the medical application of nanotechnology for the diagnosis, treatment and/or management of the diseases. Cerium oxide nanoparticles (CNPs) are metal oxide-based nanoparticles (NPs) which possess outstanding reactive oxygen species (ROS) scavenging activities primarily due to the availability of "oxidation switch" on their surface. These NP have been found to protect from a number of disorders with a background of oxidative stress such as cancer, diabetes etc. In fact, the CNPs have been found to possess the environment-dependent ROS modulating properties. In addition, the inherent catalase, SOD, oxidase, peroxidase and phosphatase mimetic properties of CNPs provide them superiority over a number of NPs. Further, chemical reactivity of CNPs seems to be a function of their surface chemistry which can be precisely tuned by defect engineering. However, the contradictory reports make it necessary to critically evaluate the potential of CNPs, in the light of available literature. The review is aimed at probing the feasibility of CNPs to push towards the clinical studies. Further, we have also covered and censoriously discussed the suspected negative impacts of CNPs before making our way to a consensus. This review aims to be a comprehensive, authoritative, critical, and accessible review of general interest to the scientific community.

Ru(bpy)32+ encapsulated cyclodextrin based metal organic framework with improved biocompatibility for sensitive electrochemiluminescence detection of CYFRA21-1 in cell

Metal-organic frameworks (MOFs) have attracted strong interest from researchers. Here, for the first time, we report a sandwich-type electrochemiluminescent biosensor as a signal probe prepared from cyclodextrin-based MOF (CD-MOF)-encapsulated Ru(bpy)₃²⁺. Due to the combination of the two materials, the obtained CD-MOF@Ru(bpy)₃²⁺ nanocomposites exhibited excellent biocompatibility and electrochemical performance. At the same time, CD-MOF@Ru(bpy)₃²⁺ adhered to the electrode surface closely because Ru(bpy)₃²⁺ was successfully encapsulated by the CD-MOF. In this paper, CD-MOF@Ru(bpy)₃²⁺ and glutaraldehyde were modified on a glassy carbon electrode (GCE) surface to provide excellent conductivity and to immobilize primary antibodies. Under the optimal experimental conditions, the established biosensor exhibited high sensitivity, a low limit of detection and a great linear range for cytokeratin 19 fragment antigen 21-1 (CYFRA21-1). Finally, this designed biosensor was further applied to the determination of CYFRA21-1 in A549 lung cancer cells. According to the results of the toxicity test, CD-MOF@Ru(bpy)₃²⁺ exhibited hypotoxicity to living bodies. These results all indicate that this biosensor has great potential for a promising approach to the evaluation of biomarkers.

Multimodal/Multifunctional Nanomaterials in (Bio)electrochemistry: Now and in the Coming Decade

Multifunctional nanomaterials, defined as those able to achieve a combined effect or more than one function through their multiple functionalization or combination with other materials, are gaining increasing attention in the last years in many relevant fields, including cargo targeted delivery, tissue engineering, in vitro and/or in vivo diseases imaging and therapy, as well as in the development of electrochemical (bio)sensors and (bio)sensing strategies with improved performance. This review article aims to provide an updated overview of the important advances and future opportunities exhibited by electrochemical biosensing in connection to multifunctional nanomaterials. Accordingly, representative aspects of recent approaches involving metal, carbon, and silica-based multifunctional nanomaterials are selected and critically discussed, as they are the most widely used multifunctional nanomaterials imparting unique capabilities in (bio)electroanalysis. A brief overview of the main remaining challenges and future perspectives in the field is also provided.

Chemiluminescent Optical Fiber Immunosensor Combining Surface Modification and Signal Amplification for Ultrasensitive Determination of Hepatitis B Antigen

Optical fiber based immunosensors are very attractive for biomarker detection. In order to improve the sensor response, we propose a promising strategy which combines porous-layer modification of the fiber surface and streptavidin-biotin-peroxidase nano-complex signal amplification in chemiluminescent detection. Two hepatitis B antigens, hepatitis B surface antigen (HBsAg) and hepatitis B e antigen (HBeAg), are used as the targets for analysis using the proposed sensor. Comparing to immunoassays using normal optical fiber sensors, the response of the present sensor is enhanced by a factor of 4.8 and 6.7 for detection of HBsAg and HBeAg, respectively. The limit-of-quantitation of the proposed method is as low as 0.3 fg/mL (0.01 fg/mL) with a wide linear response range of 3 fg/mL–150 ng/mL (0.1 fg/mL–160 ng/mL) for sensing HBsAg (HBeAg). Quantitative determination of HBsAg and HBeAg in human serum samples is performed, showing the applicability of the proposed method for biomarker detection.

Nanobioconjugates for Signal Amplification in Electrochemical Biosensing

Nanobioconjugates are hybrid materials that result from the coalescence of biomolecules and nanomaterials. They have emerged as a strategy to amplify the signal response in the biosensor field with the potential to enhance the sensitivity and detection limits of analytical assays. This critical review collects a myriad of strategies for the development of nanobioconjugates based on the conjugation of proteins, antibodies, carbohydrates, and DNA/RNA with noble metals, quantum dots, carbon- and magnetic-based nanomaterials, polymers, and complexes. It first discusses nanobioconjugates assembly and characterization to focus on the strategies to amplify a biorecognition event in biosensing, including molecular-, enzymatic-, and electroactive complex-based approaches. It provides some examples, current challenges, and future perspectives of nanobioconjugates for the amplification of signals in electrochemical biosensing.

Recent Advances of Silver Nanoparticles in Cancer Diagnosis and Treatment

Background:

Silver nanoparticles (AgNPs) are well-known as a promising antimicrobial material; they have been widely used in many commercial products against pathogenic agents. Despite a growing concern regarding the cytotoxicity, AgNPs still have attracted considerable interest worldwide to develop a new generation of diagnostic tool and effective treatment solution for cancer cells.

Objective:

This paper aims to review the advances of AgNPs applied for cancer diagnosis and treatment.

Methods:

The database has been collected, screened and analysed through up-to-date scientific articles published from 2007 to May 2019 in peer-reviewed international journals.

Results:

The findings of the database have been analysed and divided into three parts of the text that deal with AgNPs in cancer diagnosis, their cytotoxicity, and the role as carrier systems for cancer treatment. Thanks to their optical properties, high conductivity and small size, AgNPs have been demonstrated to play an essential role in enhancing signals and sensitivity in various biosensing platforms. Furthermore, AgNPs also can be used directly or developed as a drug delivery system for cancer treatment.

Conclusion:

The review paper will help readers understand more clearly and systematically the role and advances of AgNPs in cancer diagnosis and treatment.

A sensitive label-free electrochemical immunosensor for detection of cytokeratin 19 fragment antigen 21-1 based on 3D graphene with gold nanopaticle modified electrode

Previous studies have confirmed that cytokeratin 19 fragment antigen 21-1 (CYFRA 21-1) serves as a powerful biomarker in non-small cell lung cancer (NSCLC). Herein, we report for the first time a label-free electrochemical immunosensor for sensitive and selective detection of tumor marker CYFRA21-1. In this work, three-dimensional graphene @ gold nanoparticles (3D-G@Au) nanocomposite was modified on the glassy carbon electrode (GCE) surface to enhance the conductivity of immunosensor. The anti-CYFRA21-1 captured and fixed on the modified GCE through the cross-linking of chitosan (CS), glutaraldehyde (GA) and anti-CYFRA21-1. The differential pulse voltammetry (DPV) peak current change due to the specific interaction between anti-CYFRA21-1 and CYFRA21-1 on the modified electrode surface was utilized to detect CYFRA21-1. Under optimized conditions, the proposed electrochemical immunosensor was employed to detect CYFRA21-1 and exhibited a wide linear range of 0.25-800ngmL^-1 and low detection limit of 100pgmL^-1 (S/N = 3). Moreover, the recovery rates of serum samples were in the range from 95.2% to 108.7% and the developed immunosensor also shows a good correlation (less than 6.6%) with enzyme-linked immunosorbent assay (ELISA) in the detection of clinical serum samples. Therefore, it is expected that the proposed immunosensor based on a 3D-G@Au has great potential in clinical medical diagnosis of CYFRA21-1.

Carbon Nanomaterial Based Biosensors for Non-Invasive Detection of Cancer and Disease Biomarkers for Clinical Diagnosis

The early diagnosis of diseases, e.g., Parkinson's and Alzheimer's disease, diabetes, and various types of cancer, and monitoring the response of patients to the therapy plays a critical role in clinical treatment; therefore, there is an intensive research for the determination of many clinical analytes. In order to achieve point-of-care sensing in clinical practice, sensitive, selective, cost-effective, simple, reliable, and rapid analytical methods are required. Biosensors have become essential tools in biomarker sensing, in which electrode material and architecture play critical roles in achieving sensitive and stable detection. Carbon nanomaterials in the form of particle/dots, tube/wires, and sheets have recently become indispensable elements of biosensor platforms due to their excellent mechanical, electronic, and optical properties. This review summarizes developments in this lucrative field by presenting major biosensor types and variability of sensor platforms in biomedical applications.

A novel aptameric biosensor based on the self-assembled DNA-WS2 nanosheet architecture

It has been reported that tungsten disulfide (WS₂) can bind single-stranded DNA (ssDNA) with high affinity while it has less affinity toward double stranded DNA (dsDNA). In this work, for the first time, the high affinity between WS₂ and ssDNA was used to construct stable sensing interface for ATP detection. A DNA sequence with -SH at one end was first immobilized on Au electrode. WS₂ nanosheets were immobilized on the SH-DNA/Au electrode surface due to the strong affinity between WS₂ and ssDNA. Then the WS₂ nanosheets were used to immobilize ATP binding aptamer (ABA) through the high affinity between WS₂ and ssDNA, too. When ATP reacts with the ABA aptamer, duplex will be formed and dissociated from the WS₂ nanosheets. On the basis of this, an electrochemical aptasensor for ATP was fabricated. This ATP sensor showed high sensitivity, selectivity and stability due to the unique WS₂-ssDNA interactions and the specific aptamer-target recognition. Furthermore, this strategy was generalized to detect Hg²⁺ using a mercury-specific aptamer (MSO). This strategy can be expected to offer a promising approach for designing high-performance electrochemical aptasensors for a spectrum of targets.