Hierarchical Graphene coating for highly sensitive solid phase microextraction of organochlorine pesticides

In-situ growth of a covalent organic framework-based matrix-compatible microextraction coating for sensitive extraction of multiple pesticides

The potential pesticide hazard to non-target organisms is a global concern. It is critical to develop the sensitive detection methods of multiple pesticides in various complex matrices. Here, benzene-1,3,5-tricarbaldehyde (BTCA) and 1,3,5-Tri (4-aminophenyl) benzene (TAPB) were employed as precursors for the in-situ growth of COFTAPB-BTCA on the surface of amino-functionalized stainless steel wire (SS) via a solvothermal method. The successful COFTAPB-BTCA bonded fiber exhibited significant enrichment capability of pyrethroids insecticides (PYs), organophosphorus (OPPs), and organochlorine (OCPs), with enrichment factors (EFs) ranging from 1133-7762, 1319-7291, and 734.1-2882, respectively. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations indicated that various interactions contributed to its high enrichment capacity. Automated detection of PYs, OPPs, and OCPs in water, foods, and biological samples was realized by coupling this fiber with gas chromatography-mass spectrometry (GC-MS). The detection limits were as low as 0.0370-0.657 ng/L, 0.0128-0.400 ng/L, and 0.0329-0.202 ng/L for PYs, OPPs, and OCPs, respectively. In addition, the environmental risks of these samples were assessed based on the above data. This work not only provided a straightforward technique for sensitive monitoring of pesticides in complex matrices but also presented a novel approach for the in-situ controlled growth of versatile adsorbents with broad-spectrum properties.

A three-dimensional hierarchical porous graphene aerogel as a fiber coating for headspace solid-phase microextraction: Enhancing the enrichment and detection of polychlorinated naphthalenes in fish

In this study, a novel three-dimensional hierarchical porous deep eutectic solvents-modified graphene aerogel (3D DES-GA) was synthesized for use as a solid-phase microextraction (SPME) fiber coating. The SPME fiber was characterized by its fluffy and hierarchical porous structure, uniform thickness, and rapid mass transfer capabilities. This fiber demonstrated a lifetime (≥160 uses) and excellent precision (with relative standard deviations of 2.4-6.6% for single fiber and 6.0-9.8% for fiber-to-fiber repeatability). The SPME fiber also exhibited remarkable extraction performance for polycyclic aromatic hydrocarbons and polychlorinated biphenyls, which are common persistent organic pollutants in environmental samples. When combined with gas chromatography-tandem mass spectrometry, the method allowed for high-efficiency extraction (enrichment factors ranging from 1225 to 4652 folds) and sensitive determination (limit of detection ranging from 0.010 to 0.056 pg g-1) of polychlorinated naphthalenes (PCNs) in complex samples. To validate this method, we applied it to the determination of four PCNs in five types of fish tissues. The results revealed the presence of 1-chloronaphthalene at concentrations of 7.0 ± 2.9-34.8 ± 2.1 pg g-1 and 1,4-dichloronaphthalene at concentrations of 6.0 ± 0.3-10.9 ± 1.4 pg g-1 in three fish species. Compared with reported sample pretreatment methods reported in the literature, this proposed headspace SPME method offers additional advantages, including simplicity of operation and reduced sample and organic solvent consumption.

Graphene-based nanomaterials as potential candidates for environmental mitigation of pesticides

Over the years, bioaccumulation of hazardous chemicals in the food chain has become a critical issue, resulting in numerous health risks. Environmental mitigation aims to clean up contaminated sites and eliminate hazardous materials from the air, water, or soil to restore the site to its original and safe condition. Pesticides constitute one of the most dangerous environmental pollutants which are generally used to increase crop production. Addressing the removal or treatment of pesticides has become pivotal in mitigating environmental threats. Diverse remediation methods are employed to protect the environment and public health. Graphene-based materials have emerged as promising candidates with exceptional properties, including excellent adsorption capacity due to their high surface area, strong hydrophilicity, and tunable properties. Owing to these properties, they have been attracting major research attention in the field of design and fabrication of materials for the mitigation of pesticides from the environment such as from contaminated food, water and other samples. Various physical, chemical and biological extraction techniques are adopted to remove pesticides. This review article provides an insight into the potential role of graphene-based materials in the environmental remediation of pesticides. We have focused on the removal of Organophosphates, Organochlorines, Carbamates and Pyrethroids present in water, fruit, vegetable and other samples, highlighting the urgent need for environmental remediation. While graphene-based materials hold potential for pesticide remediation, addressing challenges in scalable production, assessing long-term sustainability, and mitigating potential environmental impacts are critical steps for successful large-scale applications.

Cellulose Nanocrystals Induced Loose and Porous Graphite Phase Carbon Nitride/Porous Carbon Composites for Capturing and Determining of Organochlorine Pesticides from Water and Fruit Juice by Solid-Phase Microextraction

Herein, novel, loose, and porous graphite phase carbon nitride/porous carbon (g-C₃N₄@PC) composites were prepared by decorating cellulose nanocrystals (CNCs). The characterization results demonstrate that the as-prepared composites presented high specific surface areas, porous structures, and abundant chemical groups, with the modification of CNCs. In view of the unique advantages, g-C₃N₄@PC was used as the coating material for the solid-phase microextraction (SPME) of organochlorine pesticides (OCPs) in water and juice samples. The g-C₃N₄@PC-coated fibers showed better extraction efficiencies than commercial fibers (100/7 μm PDMS and PA) toward the OCPs, with the enrichment factors of the g-C₃N₄@PC-coated fibers 5-30 times higher than the latter. Using a gas chromatography-mass spectrometry (GC-MS) instrument, the g-C₃N₄@PC-coated fibers exhibited a gratifying analytical performance for determining low concentrations of OCPs, with a wide linear range (0.1-1600 ng L^-1 for water; 0.1-1000 ng L^-1 for juice), low limits of detection (0.0141-0.0942 ng L^-1 for water; 0.0245-0.0777 ng L^-1 for juice), and good reproducibility and repeatability in optimal conditions. The established method showed good sensitivity and recovery in the determination of OCPs in the water and fruit juice samples, which displayed broad prospects for analyzing organic pollutants from environmental samples.

Dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction for the determination of some pesticides in molasses samples

In this study, a sensitive analytical method was developed to determine some pesticides (cyprodinil, trifloxystrobin, prometryn, propachlor, fenitrothion, chlorpyrifos, profenofos, and phosalone) in molasses samples. Pesticides were extracted from samples by dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction and determined by gas chromatography-mass spectrometry analysis. In this method, pesticides in molasses samples were first extracted using a water-miscible solvent (acetonitrile) in the sugaring-out homogeneous liquid-liquid extraction stage. The sugar in the ratio of 84-88% naturally contained in the molasses sample enabled phase separation in the acetonitrile-water homogeneous mixture. Then acetonitrile phase containing pesticides was used as dispersing solvent in the second step of the process. Under the specified optimum conditions, the limit of detection was calculated between 0.8-6.1 ng/g and the limit of quantification was in the range of 2.5-20 ng/g. The relative standard deviation values of molasses samples containing 150 ng/g of each analyte were found to be lower than 4.9% intra-day and 5.6% for inter-day. This validated method has been successfully applied to different types of molasses.

Nitrogen-doped porous biochar derived from marine algae for efficient solid-phase microextraction of chlorobenzenes from aqueous solution

Nitrogen-doped porous biochar (NPB) with a large specific surface area, wide pore size distribution, graphitized structure, nitrogen doping, and hydrophobicity was fabricated by high-temperature modification of algal biochar with potassium carbonate. This NPB was then uniformly coated on stainless steel wire as a novel solid-phase microextraction (SPME) fiber. The extraction efficiency of NPB-coated fiber for seven chlorobenzenes (CBs) was excellent; it was 1.0-112.2 times higher than that of commercial SPME fibers. A trace determination method was developed for seven CBs in water with the optimized extraction conditions by NPB-coated fiber and gas chromatography-electron capture detector, which showed wide linear ranges (1-1000 ng L^-1), low detection limits (0.007-0.079 ng L^-1), great repeatability (2.5-6.5% for intra-day, and 3.1-6.8% for inter-day), and excellent reproducibility (3.5-6.3%, n = 5). The practicality of the developed method was evaluated using real water samples and showed great recoveries (89.55-105.19%). This study showed that low-cost biomass wastes could be converted to advanced biochar materials by a facile method, and displayed excellent performance in SPME applications.

Biocompatible chitosan-zinc oxide nanocomposite based dispersive micro-solid phase extraction coupled with HPLC-UV for the determination of rosmarinic acid in the extracts of medical plants and water sample

In the present research, a procedure was described for the recovery of rosmarinic acid (RA) from medical extract samples using chitosan‑zinc oxide nanoparticles as a biocompatible nanocomposite (CS-ZnO-NC). The dispersive micro-solid phase extraction (D-μ-SPE) of RA from the medical extract samples was investigated by using the prepared biocompatible composite as a solid phase. The HPLC-UV method was used for measuring the extracted RA. The important variables (pH, biocompatible composite mass, contact time, and volume of eluent) associated with the extraction process were analyzed by the application of central composite design (CCD). The achieved optimum values for the mentioned variables were 7.0, 10 mg, 4 min, and 180 μL, respectively. The extraction recovery (99.68%) obtained from the predicted model was in agreement with the experimental data (98.22 ± 1.33%). In addition, under the obtained optimum conditions and over the concentration in the range of 2-3500 ng mL-1, a linear calibration curve was obtained with R2 > 0.993. The limit of detection (LOD) and quantification (LOQ) values were computed, and the obtained ranges were respectively from 0.060 to 0.089 ng mL-1 and 0.201 to 0.297 ng mL-1. In addition, the enrichment factors were obtained in the range of 93.7-110.5 with preconcentration factor of 83.3. Therefore, the D-μ-SPE-HPLC-UV method could be used for analyzing RA in the samples of the extracts obtained from the medical plants and water with the recovery values of the analyte in the range of 96.6%-105.4% and the precision with relative standard deviation <5.7%.

Facile construction of superhydrophobic hybrids of metal-organic framework grown on nanosheet for high-performance extraction of benzene homologues

Encapsulating functional nanomaterials within the bulk of metal-organic frameworks (MOFs) offers the opportunity to construct high-performance hybrid coating materials for solid phase microextraction (SPME). In this work, we proposed the facile synthesis of a superhydrophobic MOF composite material (_NSZIF-8^Si) by growing ZIF-8 on Mn_xO_y nanosheet (NS) and subsequently depositing short-chain polysiloxane on the surface of the composite. A novel SPME fiber was successfully prepared based on the _NSZIF-8^Si composite. The _NSZIF-8^Si fiber possessed outstanding thermal stability (up to 450 °C). In headspace SPME of BTEX, the home-made fiber exhibited extraction efficiencies much higher than the commercially available PDMS fiber. This phenomenon was due to the synergetic cooperation of the π-π stacking and the hydrophobic interactions between the _NSZIF-8^Si coating and the analyte molecules, as well as the increased aspect ratio of the MOF grown on the nanosheet. The established method achieved wide linearity (5-2000 ng L^-1) and low LODs (0.02 ng L^-1 to 0.21 ng L^-1). Satisfactory recoveries were obtained in the analysis of real water samples collected from the Pearl River, indicative of the good reliability of the established method for real-scenario applications. This work might provide critical insights in constructing novel NS/MOF composite materials for the development of high-performance SPME fiber coatings.

Applications of Graphene and Its Derivatives in Chemical Analysis

In this review, the applications of graphene and its derivatives in the chemical analysis have been described. The properties of graphene materials which are essential for their use in chemical and biochemical analysis are characterized. The materials are used in sensors and biosensors, in electrochemistry, in chromatography and in the sample preparation techniques. Chemical and electrochemical sensors containing graphene materials are useful devices for detecting some chemical and biochemical compounds. Chromatographic columns for HPLC with graphene containing stationary phases may be used for separation of polar and nonpolar components of some specific mixtures. Graphene materials could be successfully employed during sample preparation for analysis with SPE, magnetic SPE, and SPME techniques. HighlightsThe review of the applications of graphene (G) and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), in chemical and biochemical analysis is proposed.The electron donor-acceptor and proton donor-acceptor interactions for the graphene based materials - analytes systems and their impact on the analysis results are discussed, particularly:    i) in electrochemistry,ii) in chromatography,iii) in modern sample preparation techniquesiv) in sensors of different types.The essence of the thermal stability and the nomenclature of the graphene based materials in their different applications in chemical systems of different classes was discussed (and suggested).The benefits of using SPME fibers with immobilized graphene materials have been presented in detail.

Meso-/microporous carbon as an adsorbent for enhanced performance in solid-phase microextraction of chlorobenzenes

There is urgent demand for the design of advanced coating materials for solid-phase microextraction (SPME) for water quality monitoring and assessment because of the global occurrence of chlorobenzenes (CBs). In this study, we proposed a dual-order activation method in which potassium hydroxide is used to modify pre-activated calcium citrate to synthesize a highly developed meso-/microporous carbon (MMC). The as-obtained MMC presented well-developed porosity with a super-high specific surface area (2638.09 m² g^-1), abundant meso-/micropores (0.5-10 nm), high hydrophobicity, excellent thermal stability (>720 °C), and a partly graphitized structure. As a coating material for headspace-SPME, the MMC-coated fiber exhibited outstanding extraction capability for CBs (up to 48.5 times higher than that of commercial fibers), which may be attributed to multiple interactions between the MMC and the pollutants, including size selectivity, micropore filling, π-π stacking and hydrophobicity. Finally, a satisfactory method using an MMC-coated fiber coupled with gas chromatography and electron capture detection was developed with good linearity (1-1000 ng L^-1, R² > 0.9982), high enrichment efficiencies (enrichment factors, 861-7819), low limits of detection (0.003-0.072 ng L^-1), excellent repeatability (0.7-5.3%) and reproducibility (1.7-5.1%), and outstanding recoveries (90.18-103.02%) when applied to determine trace CBs in real water samples. These results suggest that MMC is a promising coating material for the SPME of CBs.

Applications of three-dimensional graphenes for preconcentration, extraction, and sorption of chemical species: a review

This review (with 115 refs) summarizes applications of 3-dimensional graphene (3DGs) and its derivatives in the fields of preconcentration, extraction, and sorption. Following an introduction into the field (including a definition of the materials treated here), the properties and synthetic strategies for 3DGs are described. The next section covers applications of 3DG-based adsorbents in solid phase extraction of organic species including drugs, phthalate esters, chlorophenols, aflatoxins, insecticides, and pesticides. Another section treats applications of 3DGs in solid phase microextraction of species such as polycyclic aromatic hydrocarbons, alcohols, and pesticides. We also describe how the efficiency of assays may be improved by using these materials as a sorbent. A final section covers conclusions and perspectives. Graphical abstract Graphical abstract contains poor quality and small text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.Tiff file of graphical abstract was attached. Schematic presentation of synthesis of three-dimensional graphene (3DG) from two-dimensional graphene (2DG) with self-assembly, template-assisted and direct deposition methods. Application of 3DG-based nanoadsorbents in direct immersion-solid phase microextraction (DI-SPME), headspace-SPME (HS-SPME), magnetic-solid phase extraction (Magnetic-SPE), dispersive-SPE, and magnetic sheet-SPE.

A spherical metal-organic coordination polymer for the microextraction of neonicotinoid insecticides prior to their determination by HPLC

The authors describe a new spherical metal-organic coordination polymer (MOCP) for use as an adsorbent in solid-phase microextraction (SPME). By applying the ions Co(II), Fe(II), Cu(II), and Zn(II) in these polymers, MOCP with different morphology were obtained. The respective coatings for SPME display different extraction efficiency towards neonicotinoid insecticides (neo-nics). The Co(II)@MOCP coating displays an improved extraction capability for neo-nics when compared to the four commercially available coatings studied. Following extraction with the Co(II)@MOCP-coated fiber, the neo-nics were eluted using 1 mL of trifluoroacetic acid/acetonitrile solution and quantified by high performance liquid chromatography. The method, when applied to spiked honey samples, has good linearity (0.5-600 μg kg^-1) and a low limit of detection (0.05-0.15 μg kg^-1). The precision (n = 6) for a single fiber was in the range of 3.6-8.3%. The reproducibility (for n = 5) from fiber-to-fiber ranges between 5.4 and 8.8%. The Co(II)@MOCP-coated fiber can be reused more than 80 times without any apparent reduction in its performance. In addition, the relative recoveries from spiked honey samples are very good (91.5%-103.5%). Graphical abstract A spherical metal-organic coordination polymer (MOCP) was synthesized under the regulation of Co(II) and used for the solid-phase microextraction (SPME) of neonicotinoid insecticides found in honey.

Review of Sample Preparation Techniques for the Analysis of Selected Classes of Pesticides in Plant Matrices

The aim of this article is to present the trends in extraction techniques applied for the isolation of pesticides from plant matrix. To fully compare the effectiveness of different extraction techniques, it was required to analyze compounds with possibly wide spectrum of physicochemical properties. Hence, compounds representing neonicotinoids, pyrethroids, sulfonylureas and phenylamides were selected. Based on literature studies, it may be concluded that there are three main approaches to make the analytical procedures for pesticides determination more effective: (i) the optimization of extraction conditions, however, according to ANOVA conducted on the collected literature data, not all parameters influence the extraction process equally; chemometric studies based on literature reports may lead to the conclusion that the most favorable conditions (criterion: analyte recovery, repeatability) for neonicotinoid, pyrethroid and sulfonylurea herbicide extraction from plant tissues are provided by QuEChERS - extraction with acetonitrile, while the mixtures of PSA and GCB (for neonicotinoids), and PSA, GCB, C18 (for pyrethroids) should be used in d-SPE step. For sulfonylurea compounds and metalaxyl it was impossible to identify a sorbent(s) that cleans up the extract more effectively than the others; (ii) to develop a new generation of sorbents; however, the range of their applicability is limited, mainly due to difficulties in their synthesis; (iii) to develop the new extraction techniques with as few "trouble spots" as possible.

Analysis of organochlorine pesticides in surface water of the Songhua River using magnetoliposomes as adsorbents coupled with GC-MS/MS detection

A simple and effective method based on magnetic separation has been developed for the extraction of organochlorine pesticides (OCPs) from river water samples using magnetoliposomes as adsorbents. This method avoided the time-consuming column passing process of loading large volume samples in traditional SPE through the rapid isolation of magnetoliposomes with an adscititious magnet. Lipid bilayers formed on the surface of Fe₃O₄ showed great adsorptive tendency towards analytes through hydrophobic interactions, and zwitterions headgroups endowed the outer surface of magnetoliposomes with hydrophilicity to improve the dispersing property of adsorbents in the sample matrix. The target analytes were detected by gas chromatography-tandem mass spectrometry, and the limits of detection obtained are in the range of 0.04-0.35ngL^-1. The relative standard deviations of intra- and inter-day are in the range of 2-5% and 4-7%, respectively. The proposed method was employed for analysis of six OCPs in the surface water samples from two cities along the Songhua River in different seasons. Compared with the traditional methods, the proposed method could reduce the consumption of the organic solvent and shorten the sample preparation time.

Electrophoretic deposition of ordered mesoporous carbon nitride on a stainless steel wire as a high-performance solid phase microextraction coating

An electrophoretic deposition approach was developed to fabricate a robust ordered mesoporous carbon nitride (MCN) coating for solid-phase microextraction.