Sensitive and background-free determination of thiols from wastewater samples by MOF-5 extraction coupled with high-performance liquid chromatography with fluorescence detection using a novel fluorescence probe of carbazole-9-ethyl-2-maleimide

Highly Sensitive Fluorescent Sensing for Nitrobenzene of CdII Complexes Based on Three Isomers and a Bis-Imidazole Ligand

Detection of nitro pollutants is an important topic in environmental protection. A total of 3 Cd (II) complexes (1-3) based on 3 soft organic isomers, n-(3,5-dicarboxylato benzyloxy) benzoic acid (n = 2, 3 or 4-H3DBB), and a linear N-donor ligand, 3-bis(imidazole-l-ylmethyl) benzene (3-bibz), have been synthesized hydrothermally. Structural diversity of Complexes 1-3 displays the architectural 2D or 3D change: Complex 1 exhibits a 2D network featuring tri-nuclear metal units, Complex 2 is a 3D framework based on similar tri-nuclear metal units, and Complex 3 shows a 3D network with binuclear units. Fluorescent sensing properties exhibited in all these complexes have been discovered to detect nitrobenzene (NB) selectively and sensitively. In particular, Complex 3 possesses high sensitivity for NB with the lowest detection limit of 1.15 × 10-10 M. The results of the theoretical calculation verified the fluorescence detection mechanism of NB by these Cd-based complexes. Therefore, these Cd-based complexes might be used as excellent luminescent sensors for NB.

Recent Research Progress of Red-Emitting/Near-Infrared Fluorescent Probes for Biothiols

Small-molecule biological thiols, including cysteine (Cys), homocysteine (Hcy) and glutathione (GSH), occupy a vital position in physiological and pathological activities. Abnormal fluctuations of their concentrations are often closely connected with...

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Recent Materials Developed for Dispersive Solid Phase Extraction

Solid phase extraction (SPE) is an analytical procedure developed with the purpose of separating a target analyte from a complex sample matrix prior to quantitative or qualitative determination. The purpose of such treatment is twofold: elimination of matrix constituents that could interfere with the detection process or even damage analytical equipment as well as enriching the analyte in the sample so that it is readily available for detection. Dispersive solid phase extraction (dSPE) is a recent development of the standard SPE technique that is attracting growing attention due to its remarkable simplicity, short extraction time and low requirement for solvent expenditure, accompanied by high effectiveness and wide applicability. This review aims to thoroughly survey recently conducted analytical studies focusing on methods utilizing novel, interesting nanomaterials as dSPE sorbents, as well as known materials that have been only recently successfully applied in dSPE techniques, and evaluate their performance and suitability based on comparison with previously reported analytical procedures.

Extraction of Metal Ions with Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are crystalline porous materials composed of metal ions or clusters coordinated with organic linkers. Due to their extraordinary properties such as high porosity with homogeneous and tunable in size pores/cages, as well as high thermal and chemical stability, MOFs have gained attention in diverse analytical applications. MOFs have been coupled with a wide variety of extraction techniques including solid-phase extraction (SPE), dispersive solid-phase extraction (d-SPE), and magnetic solid-phase extraction (MSPE) for the extraction and preconcentration of metal ions from complex matrices. The low concentration levels of metal ions in real samples including food samples, environmental samples, and biological samples, as well as the increased number of potentially interfering ions, make the determination of trace levels of metal ions still challenging. A wide variety of MOF materials have been employed for the extraction of metals from sample matrices prior to their determination with spectrometric techniques.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Dispersive micro-solid phase extraction based on Fe3O4@SiO2@Ti-MOF as a magnetic nanocomposite sorbent for the trace analysis of caffeic acid in the medical extracts of plants and water samples prior to HPLC-UV analysis

In this work, Fe₃O₄@SiO₂@Ti-MOF-NCs, as an efficient sorbent, have been synthesized in a laboratory and utilized for extracting CA in the medical extracts of plants and water samples before their analysis by HPLC.

A novel high-performance liquid chromatography-fluorescence analysis coupled with in situ degradation-derivatization technique for quantitation of organophosphorus thioester pesticide residues in tea

A novel high-performance liquid chromatography-fluorescence analysis in combination with in situ degradation-derivatization (ISD-D) technique was developed for simultaneous determination of seven organophosphorus thioester pesticides (OPTPs) in tea. The ISD-D technique was based on degradation of OPTPs by a nucleophilic substitution reaction between phenylbutane-1,2,3-trione-2-oxime and OPTPs, which can give thiol degradation products (DPs). The thiol DPs obtained were derivatized with the novel derivatization reagent N-(4-(carbazole-9-yl)-phenyl)-N-maleimide (NCPM) in a syringe. Attractively, NCPM itself did not fluoresce, whereas the derivatives of the thiol DPs fluoresced intensely, with excitation and emission maxima at 290 nm and 368 nm, respectively, which extraordinary reduced the background interference and increased the detection sensitivity for thiol DPs. Excellent linearity (R² > 0.995) for all OPTPs was achieved, with limits of detection and limits of quantitation ranging from 0.23 to 0.45 μg/kg and from 0.75 to 1.43 μg/kg, respectively. Satisfactory recoveries ranging from 90.5% to 96.0% were obtained for all OPTPs. The ISD-D technique provided a novel and sensitive strategy for quantitation of trace amounts of OPTPs in real samples. Graphical abstract ᅟ.

Covalent Modification of Biomolecules through Maleimide-Based Labeling Strategies

Since their first use in bioconjugation more than 50 years ago, maleimides have become privileged chemical partners for the site-selective modification of proteins via thio-Michael addition of biothiols and, to a lesser extent, via Diels-Alder (DA) reactions with biocompatible dienes. Prominent examples include immunotoxins and marketed maleimide-based antibody-drug conjugates (ADCs) such as Adcetris, which are used in cancer therapies. Among the key factors in the success of these groups is the availability of several maleimides that can be N-functionalized by fluorophores, affinity tags, spin labels, and pharmacophores, as well as their unique reactivities in terms of selectivity and kinetics. However, maleimide conjugate reactions have long been considered irreversible, and only recently have systematic studies regarding their reversibility and stability toward hydrolysis been reported. This review provides an overview of the diverse applications for maleimides in bioconjugation, highlighting their strengths and weaknesses, which are being overcome by recent strategies. Finally, the fluorescence quenching ability of maleimides was leveraged for the preparation of fluorogenic probes, which are mainly used for the specific detection of thiol analytes. A summary of the reported structures, their photophysical features, and their relative efficiencies is discussed in the last part of the review.

Functional group effect of isoreticular metal–organic frameworks on heavy metal ion adsorption

We examined adsorption behavior of some MOFs having different functional groups in their pillar structures for adsorption of some heavy metal ions.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Core-Shell Metal-Organic Frameworks/Molecularly Imprinted Nanoparticles as Absorbents for the Detection of Pyrraline in Milk and Milk Powder

A novel core-shell metal-organic framework coated with a dummy template molecularly imprinted polymer (MOF@DMIP) was synthesized by one-pot bulk polymerization for the detection of pyrraline in food samples. The pyrraline analogue pyrrolidine-3-carboxylic acid was used as the template because of its lower cost, and MIL-101 was used as the MOF core owing to its numerous inherent advantages, including high chemical and hydrothermal stabilities. MIL-101@DMIP was used to detect trace pyrraline in foods by solid-phase extraction combined with high-performance liquid chromatography. It exhibited the advantages of faster mass transport, excellent sensitivity, and selectivity. Under optimum conditions, the detection limit of this system was 40.7 μg L^-1, and a linear range was from 5 × 10^-7 to 2 × 10^-3 mol L^-1, within relative standard deviations of 4.46-6.87%. The recoveries ranged from 92.23 to 103.87%, indicating the excellent ability of the prepared MIL-101@DMIP to recognize pyrraline in complex food matrices and its potential for application in pyrraline detection.

A Europium ion post-functionalized indium metal–organic framework hybrid system for fluorescence detection of aromatics

A Eu³⁺-functionalized indium metal–organic framework hybrid system is employed as a fluorescent probe for the discrimination of BTEX in both the liquid and the gas phase.