Separation and determination of silver nanoparticle in environmental water and the UV-induced photochemical transformations study of AgNPs by cloud point extraction combined ICP-MS

Transformation of Mercuric Ions to Mercury Nanoparticles in Diatom Chaetoceros curvisetus

Particulate HgS play crucial roles in the mercury (Hg) cycle. Approximately 20-90% of dissolved Hg can be transformed into particulate HgS by algae. However, detailed knowledge regarding these particles, including sizes and distribution, remains unknown. The present study explored the formation, distribution, and excretion of mercury nanoparticles (HgNPs) in diatom Chaetoceros curvisetus. The results demonstrated that HgNPs (HgS nanoparticles, 29.6-66.2 nm) formed intracellularly upon exposure to 5.0-100.0 μg L-1 Hg(II), accounting for 12-27% of the total Hg. HgNP concentrations significantly increased with increasing intracellular Hg(II) concentrations, while their sizes remained unaffected. HgNPs formed intracellularly and partly accumulated inside the cells (7-11%). Subsequently, the sizes of intracellular HgNPs gradually decreased to facilitate expulsion, 21-50% of which were excreted. These suggested the vital roles of HgNPs in comprehending marine Hg fate. Their unique physicochemical properties and bioavailability would influence Hg biotransformation in the ocean. Additionally, both intracellular and extracellular HgNPs contributed to Hg settling with cells, ultimately leading to Hg burial in sediments. Overall, these findings further deepened our understanding of Hg biotransformation and posed challenges in accurately estimating marine Hg flux and Hg burial.

In-situ formation of the adsorbent based on octadecylamine for the extraction of Ag+ ions from aqueous solutions and its determination by microinjection flame atomic absorption spectrometry

In this research, a dispersive solid phase extraction procedure based on changing the solubility of octadecylamine with pH was proposed to determine Ag+ ions in different water samples. For this purpose, first, the pH of sample solution containing the analyte was adjusted to 10.5. Then desired volume of the octadecylamine dissolved in acidic solution was injected into the solution. Because of the low solubility of octadecylamine in alkaline solution, a cloudy state was formed. The produced octadecylamine particles acted as a complexing agent for Ag+ ions and adsorbent for the formed complex. The obtained cloudy solution was centrifuged and the sedimented particles were removed and dissolved in a diluted nitric acid solution. It was injected into a flame atomic absorption spectrometry to determine the extracted amounts of the analyte. The effect of important parameters such as the amount of octadecylamine, volume of nitric acid, and centrifugation and vortexing conditions on the extraction efficiency of the procedure was studied and optimized. In optimal conditions, the developed method showed a linear range of 0.50-200 µg L-1. The limits of detection and quantification were 0.18 and 0.50 µg L-1, respectively. Extraction recovery was 93.6%. The relative standard deviations were less than 4%. The effectiveness of the method was investigated by determination of Ag+ ions in water and wastewater samples.

A Review of Analytical Techniques for the Determination and Separation of Silver Ions and Its Nanoparticles

Many articles have already been published dealing with silver ions and its nanoparticles, but mostly from the environmental and toxicological point of view. This article is a review focused on the various analytical techniques and detection platforms used in the separation and determination of mentioned above species, especially on the trace concentration level. Commonly used are optical methods because of their high sensitivity and easy automation. The separation methods are mainly used for the separation and preconcentration of silver particles. Their combination with other analytical techniques, mainly inductively coupled plasma mass spectrometry (ICP-MS) leads to very low detection limits of analysis. The electrochemical methods are also powerful and perspective mainly because of the fabrication of new sensors designed for silver determination. All methods may be combined with each other to achieve a synergistic improvement of analytical parameters with an impact on sensitivity, selectivity and reliability. The paper comprises a review of all three types of analytical methods on the determination of trace quantities of silver ions and its nanoparticles.

Dissolved metal ion removal by online hollow fiber ultrafiltration for enhanced size characterization of metal-containing nanoparticles with single-particle ICP-MS

Single particle-inductively coupled plasma mass spectrometry (SP-ICP-MS) is a powerful tool for size-characterization of metal-containing nanoparticles (MCNs) at environmentally relevant concentrations, however, coexisting dissolved metal ions greatly interfere with the accuracy of particle size analysis. The purpose of this study is to develop an online technique that couples hollow fiber ultrafiltration (HFUF) with SP-ICP-MS to improve the accuracy and size detection limit of MCNs by removing metal ions from suspensions of MCNs. Through systematic optimization of conditions including the type and concentration of surfactant and complexing agent, carrier pH, and ion cleaning time, HFUF completely removes metal ions but retains the MCNs in suspension. The optimal conditions include using a mixture of 0.05 vol.% FL-70 and 0.5 mmol/L Na₂S₂O₃ (pH = 8.0) as the carrier and 4 min as the ion cleaning time. At these conditions, HFUF-SP-ICP-MS accurately determines the sizes of MCNs, and the results agree with the size distribution determined by transmission electron microscopy, even when metal ions also are present in the sample. In addition, reducing the ionic background through HFUF also lowers the particle size detection limit with SP-ICP-MS (e.g., from 28.3 to 14.2 nm for gold nanoparticles). This size-based ion-removal principle provided by HFUF is suitable for both cations (e.g., Ag⁺) and anions (e.g., AuCl₄^-) and thus has good versatility compared to ion exchange purification and promising prospects for the removal of salts and macromolecules before single particle analysis.

Characterization of AgNPs and AuNPs in sewage sludge by single particle inductively coupled plasma-mass spectrometry

This study develops for the first time an analytical method for the characterization of silver and gold nanoparticles in sewage sludge. The evaluation of the effect of temperature, extracting agent and centrifugation speed and time on the extraction yield was carried out through a multifactorial analysis of variance which allows us to select 289 g, 5 min and 20 mM sodium pyrophosphate tetrabasic as optimal extraction conditions. Under these conditions, the analysis of the extract by single particle inductively coupled plasma-mass spectrometry provided recovery percentages of 70 ± 2% and 56 ± 1% for silver and gold nanoparticles, respectively. Moreover, the complementary results obtained upon analysis of these extracts by transmission electron microscopy and single particle inductively coupled plasma-mass spectrometry showed that the developed method did not modify the original size and shape of these nanoparticles during the extraction procedure. Size detection limits of 23 nm and 16 nm as well as number concentration limits of 3.12 × 10⁹ particles kg^-1 and 1.38 × 10⁹ particles kg^-1 were obtained for silver and gold nanoparticles, respectively. Moreover, a stability study of silver and gold nanoparticles in sewage sludge for 12 months showed differences between the two nanoparticle types. Although the sizes were not affected during the 12 months, silver nanoparticles underwent an oxidation process from 6 months onwards, which was reflected in an increase in the percentage of ionic silver from 14 ± 1% at 6 months to 24 ± 2% at 12 months. The developed methodology represents a simple, reliable and fast tool for detecting, quantifying and assessing the stability of nanoparticles in an important environmental sample such as sewage sludge.

Cloud point extraction (CPE) combined with single particle -inductively coupled plasma-mass spectrometry (SP-ICP-MS) to analyze and characterize nano-silver sulfide in water environment

Silver Nanoparticles (Ag-NPs), an emerging type of pollutant, might occur various physical and chemical transformations, which would affect its environmental fate, transformation and biological effects. Sulfurization is the most common conversion of Ag-NPs, accompanied by the formation of nano-silver sulfide (Ag₂S-NPs). The method of Ag₂S-NPs analysis and characterization is of great significance for assessing the environmental risks of Ag. In this study, cloud point extraction (CPE) and Single Particle-Inductively Coupled Plasma-Mass Spectrometry (SP-ICP-MS) were used in combination to establish a simple and reliable analysis method to quantify Ag₂S-NPs in water, with the morphology unchanged. Non-Ag₂S-NPs were dissociated into Ag⁺ firstly, and Ag₂S-NPs and Ag⁺ were separated by CPE, followed by SP-ICP-MS analysis. The extraction rate based on particle number concentration was between (76.19 ± 0.56) % to (106.35 ± 0.00) % in environmental waters. Compared with the (76.96 ± 2.18) nm Ag₂S-NPs spiked, the particle size extracted increased slightly with (94.19 ± 2.72) nm- (97.25 ± 0.22) nm as the large-size Ag₂S-NPs originally presented in waters, instead of agglomeration. This method could be generally applicable to the analysis of Ag₂S-NPs in waters, and provide ideas for other metal sulfide nanoparticles (MS-NPs), which has certain significance.

Silver Nanoparticles and Ionic Silver Separation Using a Cation-Exchange Resin. Variables Affecting Their Separation and Improvements of AgNP Characterization by SP-ICPMS

Silver nanoparticles (AgNPs) are frequently found in everyday products and, as a consequence, their release into the environment cannot be avoided. Once in aquatic systems, AgNPs interact with natural constituents and undergo different transformation processes. Therefore, it is important to characterize and quantify AgNPs in environmental waters in order to understand their behavior, their transformation, and their associated toxicological risks. However, the coexistence of ionic silver (Ag⁺) with AgNPs in aquatic systems is one of the greatest challenges for the determination of nanosilver. Ion-exchange resins can be used to separate Ag⁺ from AgNPs, taking advantage of the different charges of the species. In this work, Dowex 50W-X8 was used to separate Ag⁺ and AgNPs in order to easily determine AgNP concentrations using inductively coupled plasma optical emission spectroscopy. The separation methodology was successfully applied to river water samples with different ratios of Ag⁺ and AgNPs. However, the methodology is not useful for wastewater samples. The described methodology also demonstrated an improvement in the determination of the particle size of AgNPs present in river waters by single particle inductively coupled plasma mass spectrometry when a significant amount of Ag⁺ is also present.

Determination and characterization of metal nanoparticles in clams and oysters

With the extensive application of nanotechnology, metal nanoparticles (MNPs) have been widely used, thus are universally detected in the environment. This has caused increasingly concerns due to their toxicity and the potential health risks they pose to humans. In this work, the concentrations and particle size distributions of MNPs and concentrations of associated metal ionic species in shellfish seafood (clams and oysters) were investigated using single particle inductively coupled plasma mass spectrometry (sp-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). The MNPs in the clam and oyster tissues were extracted via an alkaline digestion method with a recovery rate of 95.9% (for gold nanoparticles (AuNPs)). Then total concentrations of 41 metal elements were measured in the two types of seafood, of which 20 were selected for sp-ICP-MS analysis. The results showed that 5 types of MNPs were detectable in clams (Y, La, Ce, Pr, Gd) and 5 types of MNPs were detectable in oysters (Y, La, Ce, Pr, Nd). Size distributions of MNPs in clams and oysters were in the range of 35-55 nm and 30-65 nm, respectively. Nanoparticle concentrations in clams and oysters ranged from 0.6 to 37.7 ng/g and 4.2-19.7 ng/g, and accounted for 3.4%-50% and 5.5%-46% of the total metal content, respectively. Based on this analysis, the health risks of metals in the two kinds of seafood were evaluated by comparing the Provisional Tolerable Weekly Intake (PTWI) with limits recommended by the World Health Organization (WHO)/Food and Agriculture Organization (FAO). These results provide important information about the presence of metal nanoparticles in seafood and, to the best of our knowledge, this is the first time that the nanoparticles of rare earth elements have been detected and reported in bivalve mollusc tissues.

Removal of silver nanoparticles in aqueous solution by activated sludge: Mechanism and characteristics

The increasing production and use of silver nanoparticles (AgNPs) have attracted more and more attention due to their environmental and health risks. Municipal sewage biological treatment unit has been playing an important role in the removal of AgNPs. This study investigated the mechanism and characteristics of AgNPs and their removal from aqueous solution by activated sludge. Results from Scanning Electron Microscope and Energy Dispersive Spectrometer (SEM/EDS) showed that mixed AgNPs were immobilized by activated sludge. It was shown by X-ray photoelectron spectroscopy (XPS) that the fixed AgNPs had an oxidation state of +1. It was inferred by fourier transform infra-red (FTIR) spectra that AgNPs were adsorbed by activated sludge via binding with its primary amino (R-NH₂) radical groups on the surface. These results revealed that the major mechanism for the removal of AgNPs by activated sludge was adsorption. The experiment data were in agreement with the Langmuir and Redlich-Peterson isotherms. The maximum adsorption capacity ranged from 12-32 mg g^-1 at temperatures of 10-30 °C. Thermodynamic experiment showed that the adsorption of AgNPs by activated sludge was a spontaneous and endothermic reaction. The adsorption kinetics data were in good agreement with the pseudo-second-order model. The factor results indicated that the adsorption of AgNPs onto activated sludge was influenced by electrostatic repulsion, agglomeration, and the process of oxidation and sulfurization.

Assessing the environmental occurrence and risk of nano-silver in Hunan, China using probabilistic material flow modeling

Using a probabilistic material flow analysis model, we investigate the mass balance and occurrence of nano-silver in the environment of Hunan, renowned as "the home to non-ferrous metals" in China. The model builds on China-specific production and environmental information and incorporates sulfidation of nano-silver in urban wastewater treatment systems. We predict that the bulk of nano-silver (>90%), primarily originating from production and consumption of nano-silver products, ends up in sewage treatment plants (STPs, 5.3t/a), followed by the landfill (4.7t/a). More than 99% of nano-silver in STPs reacts with sulfide and thus does not appear in effluents. Direct release of nano-silver from production and consumption is identified as the dominant source of nano-silver in the environment, most of which enters surface water (0.71t/a). As such, regulation of direct emissions from production and consumption of nano-silver products can be of priority for local environmental management. The modeled regional concentrations (modes) of nano-silver are 0.9ng/L in surface water, 20ng/kg in soil, 6.9μg/kg in sediment, and negligible in the air, which agree well with measurements in the modeled region. Based on the modeled concentrations, we calculate that the risk characterization ratio is <1 in the air, surface water and soil, which means that nano-silver currently poses no risk to organisms living in these environmental compartments.

Size characterization of silver nanoparticles after separation from silver ions in environmental water using magnetic reduced graphene oxide

This study involved the synthesis of magnetic reduced graphene oxide (M-rGO) using a co-precipitation method and examined its resultant adsorption properties for mixtures containing silver ions and silver nanoparticles (AgNPs). The results indicate that M-rGO preferentially adsorbs silver ions in mixtures containing AgNPs, enabling the size characterization of smaller AgNPs (<60nm) at ultra-trace concentration levels to be more attainable. The sorbents after adsorption could be easily recovered through an external magnet. The AgNPs retained in solution were characterized using single-particle ICPMS (SP-ICPMS). The adsorption behavior of silver ions on M-rGO was well fitted with the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model, with the conclusion that the adsorption of silver ions occurred primarily through the chemical bond effect and the heterogeneous surface of the sorbent. Finally, the application of M-rGO with the approach developed herein to actual environmental water samples was successful.