Confocal laser-induced fluorescence detector for narrow capillary system with yoctomole limit of detection

Liquid phase detection in the miniature scale. Microfluidic and capillary scale measurement and separation systems. A tutorial review

Microfluidic and capillary devices are increasingly being used in analytical applications while their overall size keeps decreasing. Detection sensitivity for these microdevices gains more importance as device sizes and consequently, sample volumes, decrease. This paper reviews optical, electrochemical, electrical, and mass spectrometric detection methods that are applicable to capillary scale and microfluidic devices, with brief introduction to the principles in each case. Much of this is considered in the context of separations. We do consider theoretical aspects of separations by open tubular liquid chromatography, arguably the most potentially fertile area of separations that has been left fallow largely because of lack of scale-appropriate detection methods. We also examine the theoretical basis of zone electrophoretic separations. Optical detection methods discussed include UV/Vis absorbance, fluorescence, chemiluminescence and refractometry. Amperometry is essentially the only electrochemical detection method used in microsystems. Suppressed conductance and especially contactless conductivity (admittance) detection are in wide use for the detection of ionic analytes. Microfluidic devices, integrated to various mass spectrometers, including ESI-MS, APCI-MS, and MALDI-MS are discussed. We consider the advantages and disadvantages of each detection method and compare the best reported limits of detection in as uniform a format as the available information allows. While this review pays more attention to recent developments, our primary focus has been on the novelty and ingenuity of the approach, regardless of when it was first proposed, as long as it can be potentially relevant to miniature platforms.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Open tubular liquid chromatography: Recent advances and future trends

Nano-liquid chromatography (nanoLC) is gaining significant attention as a primary analytical technique across various scientific domains. Unlike conventional high-performance LC, nanoLC utilizes columns with inner diameters (i.ds.) usually ranging from 10 to 150 μm and operates at mobile phase flow rates between 10 and 1000 nl/min, offering improved chromatographic performance and detectability. Currently, most exploration of nanoLC has focused on particle-packed columns. Although open tubular LC (OTLC) can provide superior performance, optimized OTLC columns require very narrow i.ds. (< 10 μm) and demand challenging instrumentation. At the moment, these challenges have limited the success of OTLC. Nevertheless, remarkable progress has been made in developing and utilizing OTLC systems featuring narrow columns (< 2 μm). Additionally, significant efforts have been made to explore larger columns (10-75 μm i.d), demonstrating practical applicability in many situations. Due to their perceived advantages, interest in OTLC has resurged in the last two decades. This review provides an updated outlook on the latest developments in OTLC, focusing on instrumental challenges, achievements, and advancements in column technology. Moreover, it outlines selected applications that illustrate the potential of OTLC for performing targeted and untargeted studies.

Capillary array electrophoresis imaging of biochemicals in tissue sections

It is of great significance to reveal the molecular distribution images in biological tissues, which has led to the bloom of mass spectrometry imaging. Unfortunately, its application is encountering the resistance of high technical barriers and equipment cost, as well as the inability to image substances that cannot be desorbed or ionized, or cannot be separated by their mass-to-charge ratios. Herein presented is a complementary and cost-effective method called capillary array electrophoresis (CAE) imaging. To have the information of molecules and their spatial location, a gridding cutter was fabricated to orderly dissect a tissue section into a leakproof array of micro wells enclosed by the grid-blade arrays. After in situ extraction and fluorophore-labeling of analytes, the samples in the wells were directly subjected to CAE-LIF (laser-induced fluorescence), and the molecular distribution images were depicted with the separated peaks. The practicability was demonstrated by CAE imaging of rat brain tissue sections with amino acid neurotransmitters (e.g., glutamine, 4-aminobutyric acid, alanine, glutamic acid and aspartic acid) as targets. The resultant images showed the global differences of molecular distributions, with a spatial resolution of 1000 μm that was presently determined by the well width but ultimately by the bore size of capillary (down to 10-50 μm). CAE imaging can hence be promising for its low cost, low technical barriers and abundant mechanisms to separate the charged and non-charged, chiral and non-chiral substances.

A comprehensive review on LED-induced fluorescence in diagnostic pathology

Sensitivity, specificity, mobility, and affordability are important criteria to consider for developing diagnostic instruments in common use. Fluorescence spectroscopy has been demonstrating substantial potential in the clinical diagnosis of diseases and evaluating the underlying causes of pathogenesis. A higher degree of device integration with appropriate sensitivity and reasonable cost would further boost the value of the fluorescence techniques in clinical diagnosis and aid in the reduction of healthcare expenses, which is a key economic concern in emerging markets. Light-emitting diodes (LEDs), which are inexpensive and smaller are attractive alternatives to conventional excitation sources in fluorescence spectroscopy, are gaining a lot of momentum in the development of affordable, compact analytical instruments of clinical relevance. The commercial availability of a broad range of LED wavelengths (255-4600 nm) has opened up new avenues for targeting a wide range of clinically significant molecules (both endogenous and exogenous), thereby diagnosing a range of clinical illnesses. As a result, we have specifically examined the uses of LED-induced fluorescence (LED-IF) in preclinical and clinical evaluations of pathological conditions, considering the present advancements in the field.

LIFGO: A modular laser-induced fluorescence detection system based on plug-in blocks

In this work, a laser-induced fluorescence (LIF) detection system built in a modular assembling mode was developed based on commercial LEGO blocks and 3D printed blocks. We designed and fabricated a variety of 3D printed building blocks fixed with optical components, including laser light source, filters, lens, dichroic mirror, photodiode detector, and control circuits. Utilizing the relatively high positioning precision of the plug-in blocks, a modular construction strategy was adopted using the flexible plug-in combination of the blocks to build a highly sensitive laser-induced fluorescence detection system, LIFGO. The LIFGO system has a simple structure which could be constructed by inexperienced users within 3 h. We optimized the structure and tested the performance of the LIFGO system, and its detection limits for sodium fluorescein solution in 100 μm i.d. and 250 μm i.d. capillaries were 7 nM and 0.9 nM, respectively. Based on the LIFGO system, we also built a simple capillary electrophoresis (CE) system and applied it to the analysis of DNA fragments to demonstrate its application possibility in biochemical analysis. The separation of 7 fragments in DL500 DNA markers were completed in 600 s. Because of the features of low cost (less than $100) and easy-to-build construction, we introduced the LIFGO system to the experimental teaching of instrumental analysis for undergraduate students. The modular construction form of the LIF detection system greatly reduces the threshold of instrument construction, which is conducive to the popularization of the LIF detection technique in routine laboratories as well as the reform of experimental teaching mode.

Extension of hydrodynamic chromatography to DNA fragment sizing and quantitation

Hydrodynamic chromatography (HDC) is a technique originally developed for separating particles. We have recently extended it to DNA fragment sizing and quantitation. In this review, we focus on this extension. After we briefly introduce the history of HDC, we present the evolution of open tubular HDC for DNA fragment sizing. We cover both the theoretical aspect and the experimental implementation of this technique. We describe various approaches to execute the separation, discuss its representative applications and provide a future perspective of this technique in the conclusion section of this review.

Handheld laser-induced fluorescence detection systems with different optical configurations

There is a growing urgent requirement for miniaturized laser-induced fluorescence (LIF) detection systems in many research fields. In this work, miniaturized LIF detectors with three different optical configurations of orthogonal, confocal, and oblique were developed, using a laser diode as the excitation source and a photodiode as the photodetector. The computer simulation and experimental methods were used to investigate the distributions of laser scattered light and fluorescent light near the detection window. Other conditions including the solution preparation, sample flow rate, alignment method and filter model were also optimized. Under the optimized conditions, the detection limits of sodium fluorescein for orthogonal and confocal LIF detectors were 40 pM and 50 pM, respectively, while the limit of detection (LOD) for oblique LIF detector were 1 nM (45°) and 7 nM (67.5°). We further built a fully integrated handheld orthogonal LIF detector with a total size of 50 × 20 × 46 mm³, a cost of $380, and a detection limit of 10 pM for sodium fluorescein. It is expected that such a LIF detector could be applied in field analysis as a portable instrument or in other analysis systems as a detection module.

Two-Dimensional Cytometry Platform for Single-Particle/Cell Analysis with Laser-Induced Fluorescence and ICP-MS

A two-dimensional cytometry platform (CytoLM) with high sensitivity and high temporal resolution is developed for single-particle and single-cell sampling and analysis. First, a Dean flow-assisted vortex capillary cell sampling (VCCS) unit confines the sample stream in curved flow and drives to focus and align the particles or cells in a small probe volume. By coupling VCCS to a laser-induced fluorescence (LIF) detector with data acquisition and processing capability, a high-throughput single-particle/cell analysis system (VCCS-LIF) was established. The particle analysis throughput of 119.42/s and a detection recovery of 78.20 ± 1.75% were achieved at a density of 9.16 × 10⁴/mL for fluorescent particles, and the cell analysis throughput is 48.20/s at a density of 1.5 × 10⁵/mL. Second, the CytoLM platform is constructed by hyphenating VCCS-LIF with inductively coupled plasma mass spectrometry (ICP-MS). In the analysis of HepG2 cells by Ag⁺ incubation and AO staining, 10,760 fluorescence bursts and 3068 MS events were observed in 240 s. Invalid signals due to undispersed cells were controlled at 3.80% for LIF and 1.01% for MS, with a proportion of effective signal of >96.20%. After peak identification and integral processing of the original data, the statistical results including peak area, height, width, and spacing are obtained concurrently and the information on concentration and elemental quantification of single cells is evaluated. CytoLM facilitates high-throughput, multi-dimensional, and multi-parameter characterization of particles and cells, and it may provide vast potential in life science analysis.

Liquid Chromatographic Separation Using a 2 μm i.d. Open Tubular Column at Elevated Temperature

We have experimentally demonstrated the extraordinarily high resolving power of liquid chromatography (LC) using a narrow open tubular (OT) column. In this work, we show that we can further increase its efficiency, peak capacity, and separation speed by elevating the operation (or column) temperature; all of these three numbers can be improved without mutual compromises. We use a mixture of five amino acids as a sample and show that we can increase the efficiency by 34%-260% and the separation speeds by 7%-10% by raising the operation temperature from 30 to 70 °C. When we use a 2 μm i.d. × 80 cm in length OT column coated with OTMS at a temperature of 70 °C, we can frequently obtain peak capacities of 700-800 within 20-30 min for separating cytochrome C digests. By increasing the column length to 160 cm, we can obtain a peak capacity of 2720 within 143 min for separating a complex peptide sample. This peak capacity is the highest peak capacity to date for one-dimensional LC separations. Importantly, heating the column is easy to implement and does not cost much, and many commercial LC systems already have compartments to control column temperatures. Running LC using a narrow OT column at an elevated temperature should broaden the applications of OT-LC in chemical and biochemical analyses.

Radiometric characterisation of light sources used in analytical chemistry - A review

Light sources are an indispensable component of an overwhelmingly large number of analytical methods. Radiometric characterisation of light sources in analytical chemistry is therefore of fundamental importance. This review presents up to date knowledge on methods to characterise radiometric properties of light sources in terms of radiometric power, irradiance, brightness, luminous efficacy, luminous efficiency and emission spectra, all of which are crucial parameters for their use in analytical chemistry. Special attention is paid to radiometric characterisation of new generations of light sources with focus on miniaturised and low-cost light sources suitable for portable analytical instrumentation. Miniaturised light sources, especially new generations of solid-state light sources including solution processable quantum dot light emitting diodes (QLEDs), organic LEDs (OLEDs) as well as conventional LEDs and lasers, are radiometrically characterised through various spectrophotometric, actinometric as well as new facile radiometric methods. Although the areas of analytical use of new light sources including QLEDs, OLEDs as well as other important light sources such as deep ultraviolet (DUV) and infrared LEDs in analytical chemistry are yet to reach their potential, their radiometric characterisation opens future options for their wider deployment in analytical chemistry.

A Two-Dimensional Affinity Capture and Separation Mini-Platform for the Isolation, Enrichment, and Quantification of Biomarkers and Its Potential Use for Liquid Biopsy

Biomarker detection for disease diagnosis, prognosis, and therapeutic response is becoming increasingly reliable and accessible. Particularly, the identification of circulating cell-free chemical and biochemical substances, cellular and subcellular entities, and extracellular vesicles has demonstrated promising applications in understanding the physiologic and pathologic conditions of an individual. Traditionally, tissue biopsy has been the gold standard for the diagnosis of many diseases, especially cancer. More recently, liquid biopsy for biomarker detection has emerged as a non-invasive or minimally invasive and less costly method for diagnosis of both cancerous and non-cancerous diseases, while also offering information on the progression or improvement of disease. Unfortunately, the standardization of analytical methods to isolate and quantify circulating cells and extracellular vesicles, as well as their extracted biochemical constituents, is still cumbersome, time-consuming, and expensive. To address these limitations, we have developed a prototype of a portable, miniaturized instrument that uses immunoaffinity capillary electrophoresis (IACE) to isolate, concentrate, and analyze cell-free biomarkers and/or tissue or cell extracts present in biological fluids. Isolation and concentration of analytes is accomplished through binding to one or more biorecognition affinity ligands immobilized to a solid support, while separation and analysis are achieved by high-resolution capillary electrophoresis (CE) coupled to one or more detectors. When compared to other existing methods, the process of this affinity capture, enrichment, release, and separation of one or a panel of biomarkers can be carried out on-line with the advantages of being rapid, automated, and cost-effective. Additionally, it has the potential to demonstrate high analytical sensitivity, specificity, and selectivity. As the potential of liquid biopsy grows, so too does the demand for technical advances. In this review, we therefore discuss applications and limitations of liquid biopsy and hope to introduce the idea that our affinity capture-separation device could be used as a form of point-of-care (POC) diagnostic technology to isolate, concentrate, and analyze circulating cells, extracellular vesicles, and viruses.

Spherical Dichroic Reflector Improves Limit of Detection in Laser-Induced Fluorescence Detection

A miniature laser-induced fluorescence (mLIF) detector utilizing a novel spherical dichroic reflector (SDR), an unconventional long working distance high magnification objective, an uncommon broadband emission-matched excitation filter pair, and a silicon-based photodiode detector assembly instead of a photomultiplier tube was developed and evaluated. The detection cell was placed at the spherical center of the SDR instead of the regular focus, yielding a 1.8× signal-to-noise ratio (SNR) improvement. Different from previous works, the use of a 40× objective with a long working distance of 5.38 mm and a broadband BP 527-70 nm emission filter with matched BP 450-30 nm excitation filter improved SNR to 4.6× and 1.9×, respectively. By flow injection analysis (FIA) evaluation, the limit of detection (LOD; 3σ method) for fluorescein sodium was 1.5 × 10^-13 M or 8.9 fluorescein molecules in 98 pL detection volume, which was the lowest level of LIFs evaluated by FIA mode. The analysis of three kinds of amino acids with LODs at sub pM to fM level (the lowest levels, hundreds of times lower than previous works using normal capillary) demonstrated the potential of the mLIF in ultratrace analysis of biological and environmental samples, including low copy molecules in a single cell.

Laser-induced fluorescence detector with a fiber-coupled micro GRIN lens for capillary electrophoresis

Capillary electrophoresis coupled with sheath-flow laser-induced fluorescence (LIF) detection has been shown to offer outstanding sensitivity for chemical and biochemical analysis. However, a major drawback remains with the complexity of the optical configuration traditionally employed. Here we present a simplified confocal optics based on fiber optics and micro gradient-index (GRIN) lenses for modular optical design in capillary electrophoresis with laser-induced fluorescence. We demonstrate the use of the optical system with a sheath-flow cuvette as the laser-induced fluorescence detector for capillary electrophoresis. The system's performance was established with concentration detection limits of 8±2pM and mass detection limits of 57 zeptomole for a standard sodium fluorescein sample.

Visual and real-time imaging focusing for highly sensitive laser-induced fluorescence detection at yoctomole levels in nanocapillaries

We developed a highly sensitive laser-induced fluorescence detection system, involving visual and real-time imaging focusing instead of the use of fluorescent reagents, for the detection of analytes in nanocapillaries.

Quantification of Low Copy Number Proteins in Single Cells

We have developed an ultrasensitive and highly selective method to quantify low copy number intracellular proteins in a single cell using a low-cost laser-induced fluorescence (LIF) detector and a BV605 fluorescent probe. Active caspase3 proteins in cells were labeled by corresponding antibody-BV605 fluorescent binding, and a cell was injected into a 20 cm × 50 μm i.d. capillary column, followed by in situ lysis and capillary electrophoresis (CE)-LIF analysis. About seven active caspase3 protein molecules in a detection volume of 91 pL could be detected. In our method, cross-bounding proteins other than active caspase3 could be separated and distinguished by differences of retention time. By using Si photodiode assembly as a fluorescent detector instead of PMT, the dynamic range of the LIF is over 4 orders of magnitude. In this experiment, we found that the number of active caspase3 molecules in 98 single Jurkat cells were from 629 to 12171, reflecting significant heterogeneity among the cells although they were from the same batch. For extended application, it could also be applied to quantify other types of low copy number proteins in a single cell as long as the corresponding antibodies are provided. This high-sensitive method could also be a promising tool for earlier cancer diagnosis and related disease pathway research which is relevant to low copy number proteins. In addition, this low-cost system could also be easily expanded to an array system for high-throughput quantitation of low copy proteins in single cells.

Ultrafast Gradient Separation with Narrow Open Tubular Liquid Chromatography

Separation speed and resolution are two important figures of merit in chromatography. Often, one gains the speed at the cost of the resolution, and vice versa. Scientists have employed short-packed columns for ultrafast separations but encountered challenges such as limited mobile phase velocity, extra-column effect caused band broadening, and column packing difficulty. We have recently demonstrated ultrahigh resolutions of narrow open tubular liquid chromatography (NOTLC); this allows us to trade some of the resolution for speed. In this work, we explored NOTLC for ultrafast LC separations. We used a 2.7 cm (effective length) narrow open tubular (NOT) column and showed a baseline separation of 6 amino acids in less than 700 ms. Ways to further increase the speed were discussed. Using short narrow open tubular (NOT) columns to perform ultrafast separation we overcame the challenges from using short packed columns. To demonstrate the feasibility of using this ultrafast separation technique for practical applications, we separated complex protein digests; peptides were nicely resolved in ∼1 min.

Experimentally Validating Open Tubular Liquid Chromatography for a Peak Capacity of 2000 in 3 h

The advancements in life science research mandate effective tools capable of analyzing large numbers of samples with low quantities and high complexities. As an essential analytical tool for this research, liquid chromatography (LC) encounters an ever-increasing demand for enhanced resolving power, accelerated analysis speed, and reduced limit of detection. Although theoretical studies have indicated that open tubular (OT) columns can produce superior resolving power under comparable elution pressures and analysis times, ultrahigh-resolution and ultrahigh-speed open tubular liquid chromatography (OTLC) separations have never been reported. Here we present experimental results to demonstrate the predicted potential of this technique. We use a 2 μm i.d. × 75 cm long OT column coated with trimethoxy(octadecyl)silane for separating pepsin/trypsin digested E. coli lysates and routinely produce exceptionally high peak capacities (e.g., 1900-2000 in 3-5 h). We reduce the column length to 2.7 cm and exhibit the capability of OTLC for ultrafast separations. Under an elution pressure of 227.5 bar, we complete the separation of six amino acids in ∼800 ms and resolve these compounds within ∼400 ms. In addition, we show that OTLC has low attomole limits of detection (LOD) and each separation requires samples of only a few picoliters. Importantly, no ultrahigh elution pressures are required. With the ultrahigh resolution, ultrahigh speed, low LOD, and low sample volume requirement, OTLC can potentially be a powerful tool for biotech research, especially single cell analysis.

Narrow, Open, Tubular Column for Ultrahigh-Efficiency Liquid-Chromatographic Separation under Elution Pressure of Less than 50 bar

We report that we can achieve extremely high separation efficiencies using a narrow, open, tubular (NOT) column for liquid-chromatographic separations, and we can carry out these separations under an elution pressure of no more than 50 bar. To improve the separation efficiency in packed-column liquid chromatography, one of the most effective approaches is to reduce the monodispersed-particle sizes. A direct consequence of reduced particle size is an increased elution pressure. High efficiencies have been obtained in ultrahigh-performance liquid chromatography (UPLC) using 1-2 μm or even submicron particles, and high elution pressures (greater than 1000 bar) are commonly used to carry out these separations. Open, tubular (OT) columns have been predicted to be the most efficient columns for high-efficiency liquid-chromatographic separations, as long as the column diameter is sufficiently small (1-2 μm). However, high efficiencies have not yet been publically reported, possibly because of the challenges (such as picoliter-volume detection, nanocapillary-column preparation, low sample loadability, etc.) of utilizing 1-2 μm diameter capillaries. In this paper, we show how we overcame these problems and achieved extremely high separation efficiencies using a 2 μm inner diameter capillary. We see 200+ apparent peaks with a peak capacity of 810 within 54 min when separating a sample from trypsin-digested cytochrome C, and we count 440 apparent peaks with a peak capacity of 1640 within 172 min when separating a sample from pepsin/trypsin-digested Escherichia coli cell lysate.

A compact and low-cost laser induced fluorescence detector with silicon based photodetector assembly for capillary flow systems

A compact and low-cost laser induced fluorescence (LIF) detector based on confocal structure for capillary flow systems was developed and applied for analysis of Her2 protein on single Hela cells. A low-power and low-cost 450 nm laser diode (LD) instead of a high quality laser was used as excitation light source. A compact optical design together with shortened optical path length improved the optical efficiency and detection sensitivity. A superior silicon based photodetector assembly was used for fluorescence detection instead of a photomultiplier (PMT). The limit of detection (LOD) for fluorescein sodium was 3 × 10^-12 M or 165 fluorescein molecules in detection volume measured on a homemade capillary electroosmotic driven (EOD)-LIF system, which was similar to commercial LIFs. Compared to commercial LIFs, the whole volume of our LIF was reduced to 1/2-1/3, and the cost was less than 1/3 of them.

A narrow open tubular column for high efficiency liquid chromatographic separation

We report a great feature of open tubular liquid chromatography when it is run using an extremely narrow (e.g., 2 μm inner diameter) open tubular column: more than 10 million plates per meter can be achieved in less than 10 min and under an elution pressure of ca. 20 bar.

Miniaturized high-performance liquid chromatography instrumentation

Miniaturized high performance liquid chromatography (HPLC) has attracted increasing attention for its potential in high-throughput analyses and point-of-care applications. In this review we highlight the recent advancements in HPLC system miniaturization. We focus on the major components that constitute these instruments along with their respective advantages and drawbacks as well as present a few representative miniaturized HPLC systems. We discuss briefly some of the applications and also anticipate the future development trends of these instrumental platforms.