Green synthesis of monolithic column incorporated with graphene oxide using room temperature ionic liquid and eutectic solvents for capillary electrochromatography

Development of a three-dimensional porous ionic liquid-chitosan-graphene oxide aerogel for efficient extraction and detection of polyhalogenated carbazoles in sediment samples

The three-dimensional porous ionic liquid-chitosan-graphene oxide aerogel (IL-CS-GOA) monolithic adsorbent with a through-hole structure was prepared using natural chitosan (CS) as the skeletal framework, graphene oxide (GO) as the support to provide mechanical strength, and ionic liquid (IL) as the porogen and modifier. The resulting IL-CS-GOA demonstrated a fluffy and porous structure with various pore sizes and excellent regeneration capability (over six cycles). Its specific surface area exceeded that of CS-GOA and IL-GOA by more than 7 times, enhancing its polyhalogenated carbazoles (PHCZs) adsorption capacity. Within 5 min, IL-CS-GOA (1.0 mg) exhibited adsorption amounts of 539 ng mg-1 for 3-bromocarbazole (3-BCZ), 716 ng mg-1 for 2,7-dibromocarbazole (2,7-BCZ), and 798 ng mg-1 for 1,3,6,8-tetrabromocarbazole (1,3,6,8-BCZ), showcasing its rapid mass transfer and high adsorption capabilities. IL-CS-GOA was utilized as the adsorbent for glass dropper extraction (GDE) in conjunction with gas chromatography-mass spectrometry (GC-MS/MS), to develop a highly efficient and accurate method for determining PHCZs in sediments. Under optimal conditions, the established method exhibited a wide linear range (0.4-250 ng g-1, r ≥ 0.9990), low detection limits (0.04-0.24 ng g-1), and satisfactory recoveries (80.5 %-93.8 %), enabling the accurate and rapid detection of PHCZs in sediment samples. This study presents a novel approach for creating three-dimensional porous aerogels, introduces a new form of sample pretreatment using GDE with a monolithic adsorbent, and offers a new method for the determination of PHCZs in environmental matrices.

Polydopamine Coating Doped with Graphene Oxide Enhances Enantioseparation of Capillary Column

How to improve the enantiomer separation efficiency of drugs is a hot topic. In this paper, polydopamine (PDA) coating doped with graphene oxide (GO) by physical adsorption was used to modify the capillary column to enhance the enantioseparation efficiency of the drugs. In the capillary electrochromatography (CEC) system, the novel capillary column with carboxymethyl-β-cyclodextrin (CM-β-CD) as a chiral selector has completed the enantioseparation of four basic drugs (propranolol, metoprolol, amlodipine and chlorpheniramine). The optimum separation conditions were obtained by optimizing the pH of the buffer, the concentration of organic modifier, the concentration of the chiral selector and the voltage, and the resolution and peak shape were significantly improved compared with uncoated bare-fused column. The stability and reproducibility of the new capillary column were satisfactory and the relative standard deviation of intra-day and inter-day was <3.2%, and of column-to-column was <4.8%. The rich functional groups of GO are key factors to improve the enantioseparation efficiency, which also indicates that nanomaterials with easy modification of functional groups and large specific surface area are excellent resources for capillary modification applications.

Functionalized monolithic columns: Recent advancements and their applications for high-efficiency separation and enrichment in food and medicine

The chromatographic column is the core of a high-performance liquid chromatography (HPLC) system, and must have excellent separation efficiency and selectivity. Therefore, functional modification materials for monolithic columns have been rapidly developed. This study is a systematic review of the recently reported functionalized monolithic columns. In particular, the study reviews the types of functional monomers under different modification conditions, as well as the separation and detection techniques combined with chromatography, and their development prospects. In addition, the applications of functionalized monolithic columns in food analysis, biomedicine, and the analysis of active ingredient of Chinese herbal medicines in recent years are also discussed. Also reviewed are the functionalized monolithic columns for qualitative and quantitative analysis. It provided a reference for further development and application of organic polymer monolithic columns.

Ionic Liquid Modified Porous Polymer as a Dispersive Filter Extraction Adsorbent for Simple, Sensitive, and Efficient Determination of Chlorotriazine Herbicides in Irrigation Water

Triazine herbicides (TRZHs) are widely used in agricultural production, but their improper use can threaten the environment and organisms. Herein, rapid extraction of four chlorotriazine herbicides (Cl-TRZHs) in irrigation water was achieved using an ionic liquid modified porous m-aminophenol formaldehyde resin (IL-MAPFR) as a dispersive filter extraction (DFE) adsorbent. The IL-MAPFR shows excellent adsorption performance for four Cl-TRZHs (simazine, cyanazine, atrazine, and terbuthylazine), with a large specific surface area (158.1 m² g^-1) and fast mass transfer (2 min). The adsorption process conforms to the pseudo-second-order kinetics and Freundlich isotherm models. The four Cl-TRZHs were concentrated 12-16-fold after the IL-MAPFR-DFE method. Coupled with high-performance liquid chromatography, an accurate and sensitive determination method for four Cl-TRZHs in irrigation water was established, with low detection limit (0.11-0.20 ng mL^-1), high recoveries (91.5-110%), and excellent precision (relative standard deviations (RSDs) ≤ 8.4%). This method provides technical support for agricultural irrigation water quality monitoring and has great application potential in water safety, especially pesticide residues.

Rapid polymerization of polyhedral oligomeric siloxane-based zwitterionic sulfoalkylbetaine monolithic column in ionic liquid for hydrophilic interaction capillary electrochromatography

A novel polyhedral oligomeric siloxane (POSS)-based zwitterionic monolithic capillary column was prepared via one-pot polymerization in ionic liquid porogen, using N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl)ammonium betaine (DMMSA) and methacrylic ethyl trimethylammonium chloride (META) as binary functional monomers, and methacryl substituted POSS as cross-linker. The pore structure, permeability and homogeneity were well tuned by optimizing the polymerization conditions. The resultant monolith was characterized by scanning electron microscopy, nitrogen adsorption/desorption isotherm and Fourier transform infrared spectroscopy. The incorporation of zwitterionic ligand (DMMSA), quaternary amine group (META) and rigid POSS skeleton endows the hybrid organic-silica monolith with high hydrophilicity, electrostatic interaction and good mechanical stability, as well as a tunable electroosmotic flow over wide pH range. A close investigation of capillary electrochromatographic separations of different types of polar compounds such as bases, nucleosides and benzoic acids on such stationary phase exhibited a retention independent column efficiency up to 118,000 plates/m (thiourea), as well as a mixed-mode hydrophilic interaction chromatography (HILIC) retention mechanism including weak electrostatic interaction, hydrophobic interaction and anion exchange.

A graphene oxide-molybdenum disulfide composite used as stationary phase for determination of sulfonamides in open-tubular capillary electrochromatography

A graphene oxide-molybdenum disulfide (GO-MoS₂) composite was synthesized and utilized as the highly efficient stationary phase of open-tubular capillary electrochromatography (OT-CEC). The characterization results indicated that GO-MoS₂ composite was successfully synthesized. The GO-MoS₂-coated capillary column was prepared by covalent immobilization method for the determination of seven sulfonamides. The baseline separation of seven sulfonamides was achieved by GO-MoS₂-coated capillary column. The linear range was 0.05-100 μg/mL for sulfisomidine, sulfathiazole, sulfamerazine, phthalylsulfathiazole and sulfacetamide, 0.1-100 μg/mL for sulfamonomethoxine and sulfachloropyridazine with a satisfactory correlation coefficients (R²) > 0.9994. This developed OT-CEC method was successfully applied to determinate of seven sulfonamides in environmental water and milk samples with good recoveries of 85.77% - 109.10% and 80.03% - 109.97%, respectively. These results indicated that GO-MoS₂-coated capillary column possessed good stability and repeatability.

Recent developments of monolithic and open-tubular capillary electrochromatography (2017-2019)

Capillary electrochromatography, which combined the high selectivity of high-performance liquid chromatography and the high separation efficiency of capillary electrophoresis, is an attractive separation tool. In this review, the developments on monolithic and open tubular capillary electrochromatography during 2017 to August 2019 are summarized. Considering the development of novel stationary phases is the most active research field in capillary electrochromatography, monolithic capillary electrochromatography is classified according to the polymer-based and hybrid monolithic columns, while open-tubular capillary electrochromatography is categorized by cyclodextrin, silica, polymer, nanomaterials, microporous materials, and biomaterials-based open tubular columns.

An organic polymer monolith modified with an amino acid ionic liquid and graphene oxide for use in capillary electrochromatography: application to the separation of amino acids, β-blockers, and nucleotides

The preparation of an organic polymer monolithic column modified with an amino acid ionic liquid and graphene oxide (AAIL-GO) and its application to capillary electrochromatography (CEC) was described. The AAIL tetramethylammonium-L-arginine was bonded to a monolithic column that was previously modified with graphene oxide by using an hydrochloride/N-hydroxysuccinimide coupling reaction. The morphology of a poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith was examined by scanning electron microscopy. The incorporation of AAIL and graphene oxide was detected by infrared spectroscopy and elemental analysis. The resulting monolithic column produced a strong and stable electroosmotic flow from the anode to the cathode in the pH range from 3 to 9. Compared with a column modified with AAIL or graphene oxide only, the AAIL-GO-modified column has a better separation ability for amino acids, β-blockers, and nucleotides (the resolution of three amino acids: 2.231 and 2.036, β-blockers: 2.779 and 2.470 and nucleotides: 8.345 and 3.321). Molecular modeling was applied to demonstrate the separation mechanism of small molecules which showed a good support for experimental results. Graphical abstract Schematic representation of capillary electrochromatography (CEC) systems with an amino acid ionic liquid-graphene oxide modified organic polymer monolithic column as stationary phases for separation of amino acids, β-blockers, and nucleotides.

Polymer Science and Engineering Using Deep Eutectic Solvents

The green and versatile character of deep eutectic solvents (DES) has turned them into significant tools in the development of green and sustainable technologies. For this purpose, their use in polymeric applications has been growing and expanding to new areas of development. The present review aims to summarize the progress in the field of DES applied to polymer science and engineering. It comprises fundamentals studies involving DES and polymers, recent applications of DES in polymer synthesis, extraction and modification, and the early developments on the formulation of DES–polymer products. The combination of DES and polymers is highly promising in the development of new and ‘greener’ materials. Still, there is plenty of room for future research in this field.

Advances in capillary electro-chromatography

Capillary electrochromatography (CEC) is a micro-scale separation technique which is a hybrid between capillary electrophoresis (CE) and liquid chromatography (LC). CEC can be performed in packed, monolithic and open-tubular columns. In recent three years (from 2016 to 2018), enormous attention for CEC has been the development of novel stationary phases. This review mainly covers the development of novel stationary phases for open-tubular and monolithic columns. In particular, some biomaterials attracted increasing interest. There are no significant breakthroughs in technology and principles in CEC. The typical CEC applications, especially chiral separations are described.

Preparation and evaluation of a green solvent-based molecularly imprinted monolithic column for the recognition of proteins by high-performance liquid chromatography

A protein-based molecularly imprinted monolithic column was synthesized based on ionic liquids (ILs) and deep eutectic solvents (DESs) in a stainless steel column (50 mm × 4.6 mm id).