Highly fluorescent sensing of nitroaromatic explosives in aqueous media using pyrene-linked PBEMA microspheres

Tetraphenylethene-Based Cross-Linked Conjugated Polymer Nanoparticles for Efficient Detection of 2,4,6-Trinitrophenol in Aqueous Phase

The cross-linked conjugated polymer poly(tetraphenylethene-co-biphenyl) (PTPEBP) nanoparticles were prepared by Suzuki-miniemulsion polymerization. The structure, morphology, and pore characteristics of PTPEBP nanoparticles were characterized by FTIR, NMR, SEM, and nitrogen adsorption and desorption measurements. PTPEBP presents a spherical nanoparticle morphology with a particle size of 56 nm; the specific surface area is 69.1 m2/g, and the distribution of the pore size is centered at about 2.5 nm. Due to the introduction of the tetraphenylethene unit, the fluorescence quantum yield of the PTPEBP nanoparticles reaches 8.14% in aqueous dispersion. Combining the porosity and nanoparticle morphology, the fluorescence sensing detection toward nitroaromatic explosives in the pure aqueous phase has been realized. The Stern-Volmer quenching constant for 2,4,6-trinitrophenol (TNP) detection is 2.50 × 104 M-1, the limit of detection is 1.07 μM, and the limit of quantification is 3.57 μM. Importantly, the detection effect of PTPEBP nanoparticles toward TNP did not change significantly after adding other nitroaromatic compounds, indicating that the anti-interference and selectivity for TNP detection in aqueous media is remarkable. In addition, the spike recovery test demonstrates the potential of PTPEBP nanoparticles for detecting TNP in natural environmental water samples.

Application of aza-BODIPY as a Nitroaromatic Sensor

Nitroaromatic explosive detection with high sensitivity and selectivity is requisite for civilian and military safety and the ecosystem. In this study, aza boron dipyrromethene (aza-BODIPY) dye was selected as a fluorescent-based chemosensor against nitroaromatic compounds (NACs) including 2,4,6-trinitrophenol (picric acid, TNP), 2,4,6-trinitrotoluene (TNT), and 2,4-dinitrotoluene (DNT). This dye molecule exhibits sharp fluorescent behavior with high quantum yields beyond the near-infrared region (NIR) and is considered as a potential candidate for the detection of NACs. O'Shea's approach was used to synthesize tetraphenyl-conjugated aza-BODIPY molecules. Quenching of fluorescence emission of aza-BODIPY at 668 nm after the exposure to NACs was investigated under acetonitrile-water and acetonitrile-ethanol solvent conditions. The quenching responses and its mechanism were examined by considering the Stern-Volmer relationship Stern-Volmer constants (K_sv) for TNP (in water), TNP (in ethanol), TNT, and DNT, which are predicted to be 1420, 1215, 1364, and 968 M^-1, respectively, all of which are sufficiently above the limit of detection (LOD) values. Thus, the present study opens up the possibility of the usage of aza-BODIPY molecules as a low-cost, light-weight sensor for the detection of NAC explosives.

Polyaromatic Hydrocarbon (PAH)-Based Aza-POPOPs: Synthesis, Photophysical Studies, and Nitroanalyte Sensing Abilities

1,4-Bis(5-phenyl-2-oxazolyl)benzene (POPOP) is a common scintillation fluorescent laser dye. In this manuscript, the synthesis of 2-Ar-5-(4-(4-Ar'-1H-1,2,3-triazol-1-yl)phenyl)-1,3,4-oxadiazoles (Ar, Ar' = Ph, naphtalenyl-2, pyrenyl-1, triphenilenyl-2), as PAH-based aza-analogues of POPOP, by means of Cu-catalyzed click reaction between 2-(4-azidophenyl)-5-Ar-1,3,4-oxadiazole and terminal ethynyl-substituted PAHs is reported. An investigation of the photophysical properties of the obtained products was carried out, and their sensory response to nitroanalytes was evaluated. In the case of pyrenyl-1-substituted aza-POPOP, dramatic fluorescence quenching by nitroanalytes was observed.

Synthesis and Application of Fluorescent Polymer Micro- and Nanoparticles

Fluorescent polymer particles have witnessed an increasing interest in recent years, owing to their fascinating physicochemical properties as well as wide-ranging applications. In this review, the state-of-the-art research progress of fluorescent polymer particles in the past five years is summarized. First, the synthesis protocols for fluorescent polymer particles, including emulsion polymerization, precipitation polymerization, dispersion polymerization, suspension polymerization, nanoprecipitation, self-assembly, and post-polymerization modification, are presented in detail. Then, the applications of the resulting beguiling particles in anticounterfeiting, chemical sensing, and biomedicine, are illustrated. Finally, the challenges and opportunities that exist in the field are pointed out. This review aims to offer important guidance and stimulate more research attention to this rapidly developing field.

Tuning solvent-solute interactions enable visual colorimetric detection of nitro-aromatic explosives

The Janowski reaction is a critical reaction for visual colorimetric detection of nitro-aromatic explosives. However, the solvent effect is still not well explored. Herein, we report the solvent-dependent activity of the Janowski reaction between 2,4-dinitrotoluene (DNT)/2,4,6-trinitrotoluene (TNT) and NaOH. Four common solvents are studied. It is found that acetone with high donor number and low polarity is able to readily dissolve the product of Janowski reaction (Meisenheimer complexes) via Lewis acid-base interactions and solvation rules, facilitating the Janowski reactions between DNT/TNT and NaOH. Based on the color change of the Janowski reactions within acetone, a visual colorimetric assay is established. The present assay can detect DNT and TNT with a detection limit of 1.4 μM and 1.2 μM, which allows for naked-eye detection. In addition, this assay is highly selective and applicable to DNT/TNT detection in soil samples. Our work reveals the solvent effect on the Janowski reaction, providing a simple and rapid method for detection of nitro-aromatic explosives.

Random Copolymers of Styrene with Pendant Fluorophore Moieties: Synthesis and Applications as Fluorescence Sensors for Nitroaromatics

Five random copolymers comprising styrene and styrene with pendant fluorophore moieties, namely pyrene, naphthalene, phenanthrene, and triphenylamine, in molar ratios of 10:1, were synthesized and employed as fluorescent sensors. Their photophysical properties were investigated using absorption and emission spectral analyses in dichloromethane solution and in solid state. All copolymers possessed relative quantum yields up to 0.3 in solution and absolute quantum yields up to 0.93 in solid state, depending on their fluorophore components. Fluorescence studies showed that the emission of these copolymers is highly sensitive towards various nitroaromatic compounds, both in solution and in the vapor phase. The detection limits of these fluorophores for nitroaromatic compounds in dichloromethane solution proved to be in the range of 10−6 to 10−7 mol/L. The sensor materials for new hand-made sniffers based on these fluorophores were prepared by electrospinning and applied for the reliable detection of nitrobenzene vapors at 1 ppm in less than 5 min.

An enhanced fluorescence detection of a nitroaromatic compound using bacteria embedded in porous poly lactic-co-glycolic acid microbeads

The detection of explosive nitroaromatic compounds has caused worldwide concern for human safety. In this study, we introduce a fluorescent biosensor based on porous biocompatible microspheres loaded with a bioreporter for the detection of nitroaromatic compounds. Poly(lactic-co-glycolic acid) microbeads were designed as biosensors embedded with the bacterial bioreporters. The genetically engineered bacterial bioreporter can express a green fluorescent protein in response to nitroaromatic compounds (e.g., trinitrotoluene and dinitrotoluene). The modified surface structure in microbeads provides a large surface area, as well as easy penetration, and increases the number of attached bioreporters for enhanced fluorescent signals of biosensors. Moreover, the addition of the M13 bacteriophage in open porous microbeads significantly amplified the fluorescence signal for detection by the π-π interaction between peptides in the M13 bacteriophage and nitroaromatic compounds. The modification of the surface morphology, as well as the genetically engineered M13 phage, significantly amplifies the fluorescence signal, which makes the detection of explosives easier, and has great potential for the stand-off remote sensing of TNT buried in the field.

Computer vision vs. spectrofluorometer-assisted detection of common nitro-explosive components with bola-type PAH-based chemosensors

Computer vision (CV) algorithms are widely utilized in imaging processing for medical and personal electronics applications. In sensorics CV can provide a great potential to quantitate chemosensors' signals. Here we wish to describe a method for the CV-assisted spectrofluorometer-free detection of common nitro-explosive components, e.g. 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT), by using polyaromatic hydrocarbon (PAH, PAH = 1-pyrenyl or 9-anthracenyl) – based bola-type chemosensors. The PAH components of these chemical bolas are able to form stable, bright emissive in a visual wavelength region excimers, which allows their use as extended matrices of the RGB colors after imaging and digital processing. In non-polar solvents, the excimers have poor chemosensing properties, while in aqueous solutions, due to the possible micellar formation, these excimers provide “turn-off” fluorescence detection of DNT and TNT in the sub-nanomolar concentrations. A combination of these PAH-based fluorescent chemosensors with the proposed CV-assisted algorithm offers a fast and convenient approach for on-site, real-time, multi-thread analyte detection without the use of fluorometers. Although we focus on the analysis of nitro-explosives, the presented method is a conceptual work describing a general use of CV for quantitative fluorescence detection of various analytes as a simpler alternative to spectrofluorometer-assisted methods.

Simplified computer vision-assisted algorithm for the excimer fluorescence "turn-off" detection of nitro-analytes in aqueous media is described.

Detection of Nitroaromatics by Pyrene-Labeled Starch Nanoparticles

Starch nanoparticles (SNPs) were hydrophobically modified by using 1-pyrenebutyric acid (PyBA) with degrees of substitution (DS) between 0.0006 and 0.11. Fluorescence quenching studies were conducted on the pyrene-labeled starch nanoparticles (Py-SNPs) in dimethyl sulfoxide (DMSO) and water with nitromethane (NM), 4-mononitrotoluene (MNT), 2,6-dinitrotoluene (DNT), and 2,4,6-trinitrotoluene (TNT) to assess the mode of quenching of the pyrene labels in the two solvents. In DMSO where pyrene, starch, and the quenchers were soluble, a decrease in fluorescence signal was the result of dynamic encounters between the excited pyrene labels and the nitrated quenchers. In water where starch could be dispersed but pyrene and the nitroaromatic compounds (NACs) were sparingly soluble, quenching took place through the binding of NACs to pyrene aggregates. Py(11)-SNPs (Py-SNPs with a DS of 0.11)-coated filter papers (Py-CFPs) were prepared as fluorescence sensors. The fluorescence emitted by Py-CFPs was quenched to 25% of its original value within 10 ± 2, 72 ± 20, and 23 ± 4 s upon exposure to vapors of MNT, DNT, and TNT, respectively. When known amounts of NACs were deposited onto Py-CFPs, their limit of detection (LOD) when the fluorescence decreased by more than 3 standard deviations (3σ) from its original value equaled 9.2 ± 0.8, 3.3 ± 0.5, and 0.20 ± 0.02 ng/mm² for MNT, DNT, and TNT, respectively. These response times and LODs were among the best values reported to date in the scientific literature for fluorescence sensors. The selectivity of the Py-CFPs toward NACs was also investigated by comparing their response to the presence of non-nitrated aromatics, amines, and aromatic ketones. Quenching was only observed with the latter family of chemicals tested, but with much lower efficiency compared to TNT, thus reflecting some level of selectivity toward this specific NAC.

A silicon-cored tetraphenyl benzene derivative with aggregation-induced emission enhancement as a fluorescent probe for nitroaromatic compounds detection

Two benzene with multiple contiguous phenyl substituent derivatives, namely, 1, 2, 3, 4-tetraphenyl benzene (TPB) and bis(1,2,3,4-tetraphenylbenzene-yl) diphenylsilane (TPB-Si), were synthesized by the Knoevenagel/Diels-Alder method. TPB and TPB-Si both showed aggregation-induced emission enhancement (AIEE) properties in tetrahydrofuran/water mixtures. The fluorescence-quenching behaviors of the two compounds with different nitroaromatic compounds were also investigated. TPB and TPB-Si both showed low detection limit, high sensitivity, and high quenching efficiency in detecting nitroaromatic compounds. Furthermore, the two compounds in aggregate state exhibited much better detection abilities than in THF solution. And TPB-Si exhibited better detection ability than TPB in both solution and aggregate state. The reason could be attributed to the special tetrahedral molecular structure of TPB-Si, which was demonstrated by theoretical calculations and crystal structures. Moreover, TPB-Si in solid film also exhibited excellent detection performance to nitroaromatic explosive vapor. This work may serve as a basis for designing new organic materials with great efficiency and sensitivity in fluorescence detection.

Turn-on fluorescent sensor for the detection of lipopolysaccharides based on a novel bispyrenyl terephtalaldehyde-bis-guanylhydrazone

A “turn-on” bispyrenyl sensor for lipopolysaccharide detection with unique molecular conformations exhibits excimer emission with sensitivity down to nanomolar.