Bright-green-emissive nitrogen-doped carbon dots as a nanoprobe for bifunctional sensing, its logic gate operation and cellular imaging

Carbon dots as multifunctional fluorescent probe for Fe3+ sensing in ubiquitous water environments and living cells as well as lysine detection via "on-off-on" mechanism

Iron and amino acids are essential nutrients for living organisms, and their deficiency or excess can cause a range of diseases. Therefore, there is considerable interest in developing sensing assays capable of detecting these nutrients with sensitivity, selectivity, and multifunctionality even in complex environments. In this report, hydrothermally synthesized blue fluorescent carbon dots (C-dots) from zinc gluconate were utilized for the detection of Fe3+ and lysine via "on-off" and "on-off-on" mechanisms, respectively. Specifically, the Fe3+ sensing assay achieved a broad linear range of 0-200 μM and a low limit of detection (LOD) of 1.9 μM. It is worth mentioning that the assay was also well adapted to natural aqueous environments (e.g., lake water), and its linear detection range could be extended to 0-1000 μM with a LOD of 3.3 μM. Furthermore, the assay was also effective for intracellular Fe3+ tracking. Most importantly, the assay could also be applied for the quantitative detection of lysine with a linear range of 0-1200 μM and LOD of 8.6 μM. Systematic mechanistic studies revealed that Fe3+ sensing was based on a static quenching process between C-dots and Fe3+, whereas a stronger complexation might have formed between Fe3+ and Lys, leading to the release of C-dots and thus the recovery of fluorescence.

Facile and Green Synthesis of Carbon Dots from Melia Azedarach Leaves for pH Sensing and Cell Imaging

Carbon dots (CDs) have preeminent application prospects as a new star in the nanomaterials field. In this work, a green and facile method to synthesize the blue-emitting CDs was proposed with Melia azedarach leaves as the carbon precursors. Using nature materials without other expensive reagents and instruments, the processes were simple and environmental-friendly. The CDs had high fluorescence quantum yield (11.8%) and excellent luminescence properties. The size of them were among 1.5-2.5 nm and the emission spectrum exhibited a strong peak at 460 nm when excited at 380 nm. Additionally, the CDs were stable in most ions but sensitive to different pH values. As a result, a pH sensor was established for the detection of pH with a linear range of 3-10 pH. Moreover, it was demonstrated that the synthesized CDs had extremely low cytotoxicity. Due to their low toxicity and good biocompatibility, they entered into the A549 cells successfully for cell imaging.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Detection of mercury(II) and glutathione using a carbon dots-based "off-on" fluorescent sensor and the construction of a logic gate

In this paper, we proposed an efficient method for mercury(II) and glutathione detection using a fluorescent nanoprobe as a sensor. Carbon dots were synthesized from polyethyleneimine and ammonium citrate via a one-step hydrothermal method. The fluorescence of carbon dots was quenched since electron transfer occurred due to the interaction between mercury(II) and functional groups on the surface of carbon dots. Adding glutathione to the carbon dots-mercury(II) system, the fluorescence was recovered due to the stronger binding ability of glutathione to mercury(II). Based on the above-mentioned principle, this "off-on" fluorescent sensor can easily achieve the detection of mercury(II) and glutathione, which provided limits of detection of 22.45 nM and 61.89 nM, respectively. In this paper, the proposed method has been applied to detect mercury(II) and glutathione in real lake water and serum, respectively, and a logic gate for sensing glutathione was presented. The developed "off-on" fluorescent sensor with high sensitivity and selectivity has shown great potential for mercury(II) and glutathione detection in environmental and biosensing fields.

Preparation of novel fluorescent probe based on carbon dots for sensing and imaging Fe(III) and pyrophosphate in cells and zebrafish

Ferric ions (Fe³⁺) and pyrophosphate anions (PPi) are involved in many physiological processes and play important roles in biological systems. The abnormal level of Fe³⁺ and PPi will cause serious damage to the environment and life. At present, the application of such probes in life, especially in vivo, is still very scarce. So, the development of a fluorescent probe to simultaneously detect Fe³⁺ and PPi has great significance to the health of the environment and organisms. Herein, nitrogen-doped carbon quantum dots (N-CDs) were synthesized via solvothermal treatment, using biuret and citric acid as precursors. The synthesized N-CDs showed highly selective and sensitive detection of Fe³⁺ through a photoluminescence quenching effect. The fluorescence of N-CDs quenched by Fe³⁺ could be restored with PPi, rendering the N-CDs/Fe³⁺ sensor promising for PPi detection ('OFF-ON'). The linear ranges of detection for Fe³⁺ and PPi were 3-30 and 2-12 μM, and the limits of detection were 2.71 and 1.12 μM, respectively. The practical applications of N-CDs were tested using tap water samples. Furthermore, N-CDs can be used for the detection and imaging of Fe³⁺ and PPi in HeLa cells and zebrafish owing to their excellent optical properties.

Fluorescent Carbon Dot-Supported Imaging-Based Biomedicine: A Comprehensive Review

Carbon dots (CDs) provide distinctive advantages of strong fluorescence, good photostability, high water solubility, and outstanding biocompatibility, and thus are widely exploited as potential imaging agents for in vitro and in vivo bioimaging. Imaging is absolutely necessary when discovering the structure and function of cells, detecting biomarkers in diagnosis, tracking the progress of ongoing disease, treating various tumors, and monitoring therapeutic efficacy, making it an important approach in modern biomedicine. Numerous investigations of CDs have been intensively studied for utilization in bioimaging-supported medical sciences. However, there is still no article highlighting the potential importance of CD-based bioimaging to support various biomedical applications. Herein, we summarize the development of CDs as fluorescence (FL) nanoprobes with different FL colors for potential bioimaging-based applications in living cells, tissue, and organisms, including the bioimaging of various cell types and targets, bioimaging-supported sensing of metal ions and biomolecules, and FL imaging-guided tumor therapy. Current CD-based microscopic techniques and their advantages are also highlighted. This review discusses the significance of advanced CD-supported imaging-based in vitro and in vivo investigations, suggests the potential of CD-based imaging for biomedicine, and encourages the effective selection and development of superior probes and platforms for further biomedical applications.

Ultrasonic-Assisted Synthesis of N-Doped, Multicolor Carbon Dots toward Fluorescent Inks, Fluorescence Sensors, and Logic Gate Operations

Over past decades, the multicolor carbon dots (M-CDs) have attracted enormous attentions due to their tunable photoluminescence and versatile applications. Herein, the nitrogen-doped (N-doped) M-CDs including green, chartreuse, and pink emissive CDs are successfully synthesized by ultrasonic treatment of kiwifruit juice with different additive reagents such as ethanol, ethylenediamine, and acetone. Owing to their strong fluorescence upon irradiation with 365 nm UV light, the highly water-soluble M-CDs present great potential in the anticounterfeit field as fluorescent inks. Particularly, the resulting green emission CDs (G-CDs) with excellent fluorescence and stability are applied as a label-free probe model for “on–off” detection of Fe3+. The fluorescence of G-CDs is significantly quenched by Fe3+ through static quenching. The nanoprobe demonstrates good selectivity and sensitivity toward Fe3+ with a detection limit of ~0.11 μM. Besides, the quenched fluorescence of G-CDs by Fe3+ can be recovered by the addition of PO43− or ascorbic acid (AA) into the CDs/Fe3+ system to realize the “off–on” fluorescent process. Furthermore, NOT and IMPLICATION logic gates are constructed based on the selection of Fe3+ and PO43− or AA as the inputs, which makes the G-CD-based sensors utilized as various logic gates at molecular level. Therefore, the N-doped M-CDs hold promising prospects as competitive candidates in monitoring the trace species, applications in food chemistry, anticounterfeit uses, and beyond.

Dual-Mode Fluorescence and Visual Fluorescent Test Paper Detection of Copper Ions and EDTA

In this study, blue-emission carbon dots were prepared from the legumes of the vegetable Pisum sativum Linn. by one-step carbonization. The fluorescence of a carbon dot (CDs) solution can be quenched by copper ions and recovered by ethylenediaminetetraacetic acid (EDTA). In addition, two kinds of visual fluorescent filter papers were prepared. Finally, a dual-mode fluorescence and visual fluorescent test paper was employed for the detection of copper ions and EDTA. The simple synthesis method and the high safety enable this material to have more application possibilities.

A Review of Off-On Fluorescent Nanoprobes: Mechanisms, Properties, and Applications

With the development of nanomaterials, fluorescent nanoprobes have attracted enormous attention in the fields of chemical sensing, optical materials, and biological detection. In this paper, the advantages of "off-on" fluorescent nanoprobes in disease detection, such as high sensitivity and short response time, are attentively highlighted. The characteristics, sensing mechanisms, and classifications of disease-related target substances, along with applications of these nanoprobes in cancer diagnosis and therapy are summarized systematically. In addition, the prospects of "off-on" fluorescent nanoprobe in disease detection are predicted. In this review, we presented information from all the papers published in the last 5 years discussing "off-on" fluorescent nanoprobes. This review was written in the hopes of being useful to researchers who are interested in further developing fluorescent nanoprobes. The characteristics of these nanoprobes are explained systematically, and data references and supports for biological analysis, clinical drug improvement, and disease detection have been provided appropriately.

A novel carbon dot/polyacrylamide composite hydrogel film for reversible detection of the antibacterial drug ornidazole

A carbon dot/polyacrylamide (CDs/PAM) composite hydrogel film with stable fluorescence performance was fabricated by merging a hydrogel film and carbon dots (CDs) with blue fluorescence, which were prepared by hydrothermal synthesis using anhydrous citric acid and acrylamide as carbon sources. The obtained CDs/PAM composite hydrogel film exhibited a good fluorescence quenching effect on ornidazole (ONZ), and can be used for the quantitative detection of ONZ. In the ONZ concentration range of 5–60 μM, a good linear relationship between the fluorescence quenching efficiency of the CDs/PAM composite hydrogel film and the concentration of ONZ solution was obtained with a low detection limit of 2.35 μM. In addition, the detection system has good selectivity and strong anti-interference capacity, and can be used in repeated cycles for detection.

A novel carbon dot/polyacrylamide composite hydrogel film with stable blue fluorescence performance was fabricated by merging a hydrogel film and carbon dots, which was used for highly selective and quantitative detection of ONZ in real samples.

Ratiometric fluorescent sensors for sequential on-off-on determination of riboflavin, Ag+ and l-cysteine based on NPCl-doped carbon quantum dots

The fluorescent sensor, especially ratiometric fluorescent sensor, is one of the most important applications for CQDs, which is becoming a research hotspot. Herein, carbon quantum dots co-doped with nitrogen, phosphorus and chlorine (NPCl-CQDs) were synthesized by acid-base neutralization reaction exothermic carbonization method. The as-fabricated NPCl-CQDs could emit blue fluorescence and possess excellent fluorescence properties. Based on the FRET, multifunctional and ratiometric fluorescent sensors for "on-off-on" sequential determination of riboflavin, Ag⁺, and Cys with good selectivity and high sensitivity were established. The linear range of riboflavin, Ag⁺, and Cys are 0.50-10.18 μM and 15.89-27.76 μM, 0.66-1.46 mM and 1.50-4.20 mM, and 0.01-0.15 μM and 0.15-0.36 μM with the limit of detection of 3.50 nM, 26.38 μM, and 0.96 nM, respectively. Furthermore, the sensors were successfully used to determine riboflavin, Ag⁺, and Cys in tablets, river water, and human urine with the recoveries of 95.2-104.0%, 95.6-102.0%, and 94.8-106.4%, respectively. More importantly, the as-constructed "on-off-on" NPCl-CQDs-based ratiometric fluorescent sensors were applied for detecting riboflavin, Ag⁺, and Cys in HeLa cells with satisfying results. The finding of this study shows the feasibility and effectiveness of the NPCl-CQDs as the available ratiometric fluorescent sensors for the determination of riboflavin, Ag⁺, and Cys in real samples and living cells.

Carbon Dots-Based Logic Gates

Carbon dots (CDs)-based logic gates are smart nanoprobes that can respond to various analytes such as metal cations, anions, amino acids, pesticides, antioxidants, etc. Most of these logic gates are based on fluorescence techniques because they are inexpensive, give an instant response, and highly sensitive. Computations based on molecular logic can lead to advancement in modern science. This review focuses on different logic functions based on the sensing abilities of CDs and their synthesis. We also discuss the sensing mechanism of these logic gates and bring different types of possible logic operations. This review envisions that CDs-based logic gates have a promising future in computing nanodevices. In addition, we cover the advancement in CDs-based logic gates with the focus of understanding the fundamentals of how CDs have the potential for performing various logic functions depending upon their different categories.

"On-off-on" detection of Fe3+ and F-, biological imaging, and its logic gate operation based on excitation-independent blue-fluorescent carbon dots

A fluorescent nanoprobe based on carbon dots (CDs) has been facilely synthesized by a one-step hydrothermal pyrolysis of salicylic acid and utilized for the sequential detection of Fe³⁺ and F^- in vitro. The fluorescence of CDs can be extinguished dramatically by Fe³⁺ based on static quenching and subsequently recovery upon addition of F^- due to the formation of stabler FeF₃. The probe exhibits high selectivity and sensitivity toward Fe³⁺ and F^- with a good linearity in the range of 10-300 μM and 0.1-200 μM, respectively, and a low detection limit of 52 nM and 8.5 nM, respectively. More importantly, as-prepared CDs with exceedingly fluorescence stability, negligible toxicity and superior biocompatibility have been expanded for detection Fe³⁺ and F^- in living cell and Escherichia coli. Furthermore, an "AND" logic gate based on as-obtained CDs has been constructed.

One-step preparation of single-layered graphene quantum dots for the detection of Fe3

Single-layer graphene quantum dots are highly desirable while their facile and controllable preparations remain challenging. Herein, single-layered graphene quantum dots (sl-GQDs) were developed via a facile one-step hydrothermal synthesis, with citric acid and β-cyclodextrin (CD) as starting materials. The sl-GQDs decorated with CD molecules emit green fluorescence with a quantum yield of 5.34%, and exhibit a good response exclusively to ferric ions for their structural oxygenous groups. The linear range of the proposed sensor for ferric ions was found in a wide concentration range of 0-85 μM. The detection limit is about 0.26 μM. The sl-GQDs based sensing platform also demonstrates its feasibility in real water sample analysis with recoveries of 93.8%-101.5%.

Dual-emission carbon dots for ratiometric detection of Fe3+ ions and acid phosphatase

We have developed a simple and convenient route to prepare fluorescent carbon dots with dual emission peaks respectively at 470 and 570 nm. The prepared dual-emission carbon dots can be used for ratiometric detection of Fe3+ ions in the range from 0 to 50 μmol·L-1 with 0.8 μmol·L-1 detection limit based on the fluorescence quenching at 570 nm. The quenched fluorescence induced by Fe3+ ions could be recovered by pyrophosphate. We further used the carbon dots-Fe3+ ions-pyrophosphate mixed system for ratiometric detection of acid phosphatase in the range from 0.08 to 6.75 μg·mL-1 with 0.01 μg·mL-1 detection limit.

High Quantum Yield Fluorescent Carbon Nanodots for detection of Fe (III) Ions and Electrochemical Study of Quenching Mechanism

Carbon nanodots (CNDs) offer potential applications in photocatalysis, optoelectronics, bio-imaging, and sensing due to their excellent photoluminescence (PL) properties, biocompatibility, aqueous solubility, and easy functionalization. Recent emphasis on CNDs in the selective detection of metal ions is due to the growing concern for human and environmental safety. In this work, two types of fluorescent carbon nanodots (CNDs) are synthesized economically from ethylene diamine (E-CNDs) or urea (U-CNDs) in a single step microwave process. The as-prepared CNDs exhibit excellent PL at an excitation wavelength of 350 nm with a quantum yield of 64% for E-CNDs and 8.4% for U-CNDs with reference to quinine sulfate. Both E-CNDs and U-CNDs demonstrate high selectivity towards Fe (III) ions among different metal ions, by fluorescence quenching in a dose dependent manner. The limit of detection of E-CNDs and U-CNDs is observed to be 18 nM and 30 nM, respectively, in the linear response range of 0-2000 μM with a short response time (seconds). The CNDs detect Fe (III) ions in tap water and serum sample with no spiking and the recovery was ~100% with the Fe (III) samples. Cellular internalization studies confirm the localization of the CNDs and the optical imaging sensing of Fe (III) ions inside living cells. A charge transfer fluorescence quenching mechanism, specifically between the CNDs and Fe (III), is proposed and examined using cyclic voltammetry. The overall characteristics of the E-CNDs provides a potential sensing platform in highly sensitive and selective detection of Fe (III) ions.

A label-free nano-probe for sequential and quantitative determination of Cr(VI) and ascorbic acid in real samples based on S and N dual-doped carbon dots

A fluorescent sulfur and nitrogen dual-doped carbon dots (S,N-CDs) was prepared by a simple and one-step acid-base neutralization and exothermic carbonization method. Hexavalent chromium (Cr(VI)) could effectively quench the fluorescence of S,N-CDs based on inner filter effect (IFE) and dynamic quenching, whereas ascorbic acid (AA) could recover the fluorescence of S,N-CDs/Cr(VI) because of IFE weakening. So an "on-off-on" and label-free nano-probe consecutive determination of Cr(VI) and AA was constructed. This nano-probe system demonstrated excellent selectivity and sensitivity to Cr(VI) and AA with linear range of 0.065-198 μmol/L (3.38-10,296 μg/L) and 6.6-892 μmol/L (1.16-157 mg/L), respectively. Meanwhile, the as-prepared S,N-CDs possess low toxicity and could be used for multi-color cell imaging in SMMC 7721 cells. More importantly, this nano-probe was successfully employed for detection of Cr(VI) in tap water and AA in food samples. In view of its simple detection condition, rapid response, wide linear range, low detection limit and inexpensive instrument, the as-constructed nano-probe system could have a wide range of potential application, including water quality monitoring and evaluation, food inspection and testing and biomedical analysis.

Fabrication of a Luminescence-Silent System Based on a Post-Synthetic Modification Cd-MOFs: A Highly Selective and Sensitive Turn-on Luminescent Probe for Ascorbic Acid Detection

A unique three-dimensional luminescent metal-organic framework (Cd-MOFs), [Cd(tpbpc)₂]·2H₂O·DMF (Htpbpc = 4'-[4,2';6',4″]-terpyridin-4'-yl-biphenyl-4-carboxylic acid; DMF = dimethylformamide), was synthesized and structurally characterized; it exhibits excellent luminescent property and structural stability in aqueous solutions. Interestingly, an unparalleled luminescence-silent system CrO₄^2-@Cd-MOFs was successfully fabricated by postsynthetic modification of metal-organic frameworks. This luminescence-silent system represents a highly selective and sensitive turn-on luminescent responding to ascorbic acid. First, this advanced fluorescent sensor displays excellent performance for CrO₄^2- ions with a quenching of fluorescence intensity originating from fluorescence resonance energy transfer (FRET) mechanism. What's more, the fluorescent intensity of CrO₄^2-@Cd-MOFs system can be recovered (turn-on) for sensing ascorbic acid because of the elimination of FRET process. Such a novel fabrication strategy should offer the guidance to develop various MOFs-implicated luminescence-silent systems as "turn-on" sensors for detection of specific chemicals.

Highly luminescent N-doped carbon dots from black soya beans for free radical scavenging, Fe3+ sensing and cellular imaging

The novel N doped carbon dots (N-CDs) were readily fabricated through one-step pyrolysis method from black soya beans. The obtained N-CDs possessed excellent photoluminescence properties with quantum yield of 38.7 ± 0.64% and dual responsive properties towards free radical and Fe3+. The N-CDs exhibited favorable radical scavenging activity (RSA) against 1,1-diphenyl-2-picrylhydrazyl (DPPH) and superoxide anion radicals. Fe3+ could induce photoluminescence quenching of N-CDs through static quenching characteristics. The possible quenching mechanism was presented. Combining with negligible toxicity and preferable biocompatibility, the N-CDs were extended to imaging intracellular Fe3+. As an attractive candidate, the N-CDs demonstrated a great potential in free radical scavenging, sensing and cellular imaging.

A reversible fluoride chemosensor for the development of multi-input molecular logic gates

A reversible chemosensor for the development of a multi-input molecular logic gate was shown.

A review on nanostructured carbon quantum dots and their applications in biotechnology, sensors, and chemiluminescence

Carbon quantum dots (CQDs) are a member of carbon nanostructures family which have received increasing attention for their photoluminescence (PL), physical and chemical stability and low toxicity. The classical semiconductor quantum dots (QDs) are semiconductor particles that are able to emit fluorescence by excitation. The CQDs is mainly referred to photoluminescent carbon nanoparticles less than 10 nm, with surface modification or functionalization. Contrary to other carbon nanostructures, CQDs can be synthesized and functionalized fast and easily. The fluorescence origin of the CQDs is a controversial issue which depends on carbon source, experimental conditions, and functional groups. However, PL emissions originated from conjugated π-domains and surface defects have been proposed for the PL emission mechanisms of the CQDs. These nanostructures have been used as nontoxic alternatives to the classical heavy metals containing semiconductor QDs in some applications such as in-vivo and in-vitro bio-imaging, drug delivery, photosensors, chemiluminescence (CL), and etc. This paper will introduce CQDs, their structure, and PL characteristics. Recent advances of the application of CQDs in biotechnology, sensors, and CL is comprehensively discussed.

Halogen bond triggered aggregation induced emission in an iodinated cyanine dye for ultra sensitive detection of Ag nanoparticles in tap water and agricultural wastewater

Aggregation induced emission (AIE) has emerged as a powerful method for sensing applications. Based on AIE triggered by halogen bond (XB) formation, an ultrasensitive and selective sensor for picomolar detection of Ag nanoparticles (Ag NPs) is reported. The dye (CyI) has an iodine atom in its skeleton which functions as a halogen bond acceptor, and aggregates on the Ag NP plasmonic surfaces as a halogen bond donor or forms halogen bonds with the vacant π orbitals of silver ions (Ag⁺). Formation of XB leads to fluorescence enhancement, which forms the basis of the Ag NPs or Ag⁺ sensor. The sensor response is linearly dependent on the Ag NP concentration over the range 1.0–8.2 pM with an LOD of 6.21 pM (σ = 3), while for Ag⁺ it was linear over the 1.0–10 μM range (LOD = 2.36 μM). The sensor shows a remarkable sensitivity for Ag NPs (pM), compared to that for Ag⁺ (μM). The sensor did not show any interference from different metal ions with 10-fold higher concentrations. This result indicates that the proposed sensor is inexpensive, simple, sensitive, and selective for the detection of Ag NPs in both tap and wastewater samples.

Based on AIE triggered by halogen bond (XB) formation, we established an ultrasensitive and selective sensor for picomolar detection of Ag nanoparticles (Ag NPs).