Poly(glyceryl monomethacrylate-co-ethylene glycol dimethacrylate) monolithic columns with incorporated bare and surface modified gluconamide fumed silica nanoparticles for hydrophilic interaction capillary electrochromatography

Itaconic Acid-Based Organic-Polymer Monolithic Column for Hydrophilic Capillary Electrochromatography and Its Application in Pharmaceutical Analysis

Itaconic acid is an excellent hydrophilic monomer owing to the dicarboxylic group possessing strong polarity. This study reports on the preparation of a new organic-polymer monolithic column poly(itaconic acid-co-3-(acryloyloxy)-2-hydroxypropyl methacrylate) (poly(IA-co-AHM)) featuring excellent hydrophilic chromatography ability and its application in pharmaceutical analysis. The monolithic column was successfully synthesized by using the monomer itaconic acid and the cross-linker AHM through an in situ copolymerization method. Optical microscopy, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were employed for the characterization of the poly(IA-co-AHM) monolithic column, and all of these demonstrated that the prepared itaconic acid-based monolithic column exhibited satisfactory permeability and a homogeneous porous structure. Owing to the carboxylic groups of itaconic acid, a cathodic electroosmotic flow (EOF) was generated on the itaconic acid-based monolithic column among the pH ranges of the mobile phase from 4.0 to 9.0. Depending on the powerful hydrophilic interactions, different kinds of polar substances, including thioureas, nucleoside drugs, sulfonamides, and polypeptides, were separated efficiently by the itaconic acid-based monoliths poly(IA-co-AHM). The separations of polar compounds were successfully realized, even at a lower level of 50% acetonitrile content on this monolithic column. The highest column efficiencies corresponding to N,N'-dimethylthiourea and idoxuridine were 102 720 and 124 267 N/m, respectively. The poly(IA-co-AHM) monolithic column displayed excellent repeatability, whose relative standard deviations (RSDs) of the retention time and peak area were both lower than 5.0%. All experimental results demonstrated that the new itaconic acid-functionalized monolithic column was greatly appropriate to separate the polar compounds under the HILIC mode.

Macrocyclic Antibiotics as Effective Chiral Selectors in Liquid Chromatography for Enantiomeric Separation of Pharmaceutical Compounds: A Review

Chiral separation techniques play a crucial role in the pharmaceutical industry, where the enantiomeric purity of drugs can have a significant impact on their efficacy and safety. Macrocyclic antibiotics are highly effective chiral selectors used in various chiral separation techniques, including LC, HPLC, SMB, and TLC, offering reproducible results and a wide range of applications. However, developing robust and efficient immobilization mechanisms for these chiral selectors remains a challenge. This review article focuses on various immobilization approaches, such as immobilization, coating, encapsulation, and photosynthesis, that have been applied to immobilize macrocyclic antibiotics on their support. Commercially available macrocyclic antibiotics for conventional liquid chromatography include Vancomycin, Norvancomycin, Eremomycin, Teicoplanin, Ristocetin A, Rifamycin, Avoparcin, Bacitracin, and others. In addition, capillary (nano) liquid chromatography has also been used in chiral separation utilizing Vancomycin, Polymyxin B, Daptomycin, and Colistin Sulfate. Macrocyclic antibiotic-based CSPs have been extensively applied due to their reproducible results, ease of use, and broad range of applications, capable of separating a large number of racemates.

Hydrophobic AEROSIL®R972 Fumed Silica Nanoparticles Incorporated Monolithic Nano-Columns for Small Molecule and Protein Separation by Nano-Liquid Chromatography

A new feature of hydrophobic fumed silica nanoparticles (HFSNPs) when they apply to the preparation of monolithic nano-columns using narrow monolithic fused silica capillary columns (e.g., 50-µm inner diameter) was presented. The monolithic nano-columns were synthesized by an in-situ polymerization using butyl methacrylate (BMA) and ethylene dimethacrylate (EDMA) at various concentrations of AEROSIL^®R972, called HFSNPs. Dimethyl formamide (DMF) and water were used as the porogenic solvents. These columns (referred to as HFSNP monoliths) were successfully characterized by using scanning electron microscopy (SEM) and reversed-phase nano-LC using alkylbenzenes and polyaromatic hydrocarbons as solute probes. The reproducibility values based on run-to-run, column-to-column and batch-to-batch were found as 2.3%, 2.48% and 2.99% (n = 3), respectively. The optimized column also indicated promising hydrophobic interactions under reversed-phase conditions, while the feasibility of the column allowed high efficiency and high throughput nano-LC separations. The potential of the final HFSNP monolith in relation to intact protein separation was successfully demonstrated using six intact proteins, including ribonuclease A, cytochrome C, carbonic anhydrase isozyme II, lysozyme, myoglobin, and α-chymotrypsinogen A in nano-LC. The results showed that HFSNP-based monolithic nanocolumns are promising materials and are powerful tools for sensitive separations.

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded octadecyl ligands for use in reversed-phase capillary electrochromatography

A carboxy precursor monolithic column, namely poly(carboxy ethyl acrylate-co-ethylene glycol dimethacrylate) was first produced in a 100 μm i.d. fused-silica capillary and subsequently surface bonded with n-octadecyl (C₁₈ ) ligands by a post-polymerization functionalization process with octadecylamine in the presence of N,N´-dicyclohexylcarbodiimide. The bonding of octadecyl ligands was achieved via an amide linkage between the carboxy functions of the precursor monolith and the amino group of the octadecylamine compound. The resulting C₁₈ monolith exhibited a very low electroosmotic flow (EOF), a fact that required the incorporation of small amounts of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) in the polymerization solution to produce a precursor monolith with fixed negative charges of sulfonate groups. This may indicate that the conjugation of the carboxy functions with octadecylamine occurred to a large extent so that the amount of residual carboxy functions was sparsely dispersed and not enough to produce a desirable EOF. The EOF velocity of the C₁₈ column having fixed negative charges provided by the incorporated AMPS increased with increasing ACN content of the mobile phase signaling an increased binding of mobile phase ions to the polar amide linkages near the monolithic surface, and a decreased viscosity of the mobile phase, both of which would result in increased EOF velocity. The C₁₈ monolithic column constituted a novel nonpolar sorbent for reversed-phase capillary electrochromatography for nonpolar solutes, e.g., alkylbenzenes, alkylphenyl ketones, and polyaromatic hydrocarbons, and slightly polar compounds including phenol and chlorophenols. The C₁₈ monolithic column exhibited relatively high selectivity toward chlorophenols differing by one chloro substituent.

Precursor carboxy-silica for functionalization with interactive ligands. I. Carbodiimide-assisted preparation of silica-bonded stationary phases with octadecyl, naphthyl, and anthracenyl ligands: Comparison of their selectivity and retentivity

A precursor carboxy-silica support was introduced for grafting retentive ligands for use in high-performance liquid chromatography. This support was prepared by sequentially reacting 5 μm silica particles with vinyltrimethoxysilane and then thioglycolic acid. The carboxy-silica thus obtained was subsequently functionalized with octadecylamine, 2-naphthylamine, or 2-aminoanthracene by on-column reactions via a carbodiimide conjugation reaction. The carbodiimide with its zero-length carboxyl-to-amine coupling ability works by activating the surface carboxyl groups of the precursor support for direct reaction with the primary amines of octadecylamine, 2-naphthylamine, or 2-aminoanthracene via amide bond formation. These reactions series, which are applied for the first time in high-performance liquid chromatography column fabrication, yielded the octadecyl-, naphthyl-, and anthracenyl-silica columns. The three columns were evaluated for their reversed-phase chromatography retention properties with alkylbenzenes, alkylphenyl ketones, nitroalkanes, benzene and toluene derivatives, polyaromatic hydrocarbons, and nitro-substituted amino acids. The naphthyl- and anthracenyl-silica exhibited a good selectivity and efficiency toward most of the aromatic analytes when compared to the octadecyl-silica. Nitro-substituted amino acids containing electron withdrawing groups showed greater selectivity than other analytes on the aromatic-based columns than the C₁₈ column. This is because of the ability of the π electron system of the analyte to accept electrons from the aromatic-based stationary phase (a Lewis base).

Strong hydrophilic monolithic column functionalized with amphiphilic benzyl quinine for capillary electrochromatography and application in pharmaceutical analysis

An innovative strong hydrophilic organic polymer monolithic column of poly(N-benzylquininium chloride-co-1, 3, 5-triacryloylhexahydro-1, 3, 5-triazine) (poly(NBQ-co-TAT)) has been successfully synthesized through in situ copolymerization for capillary electrochromatography. The amphiphilic monomer NBQ and the strong polar cross-linker TAT are firstly used in hydrophilic electrochromatography by taking advantage of the exhibition of hydrophilicity at lower levels of organic solvent and ease formation of porous structure. The monolithic column poly(NBQ-co-TAT) shows powerful hydrophilic selectivity with mobile phase containing more than 60% organic solvent. The introduction of NBQ and TAT enlarges the sources of functional monomers and cross-linkers for HILIC. Due to the presence of the positively charged group in NBQ, an anodic electroosmotic flow is generated with the change of pH values from 2.0 to 12.0. The monolithic column was used for the separations of thioureas, phenols, xanthines, nucleobases, acidic substances and pharmaceuticals. The highest column efficiency for N, N'-dimethylthiourea is 1.15 × 10⁵ N m^-1. The application of the monolithic column for a real sample, cytochrome C digestion indicates its great potential in practical application.

Various Strategies in Post-Polymerization Functionalization of Organic Polymer-Based Monoliths Used in Liquid Phase Separation Techniques

This review article is aimed at summarizing the various strategies that have been developed so far for post-polymerization functionalization (PPF) of organic polymer-based monoliths used in liquid phase separation techniques, namely HPLC at all scales and capillary electrochromatography (CEC). The reader will find the organic reactions performed on monolithic columns for grafting the chromatographic ligands needed for solving the separation problems on hand. This process involves therefore the fabrication of template monoliths that carry reactive functional groups to which chromatographic ligands can be covalently attached in a post-polymerization kind of approach. That is, the template monolith that has been optimized in terms of pore structure and other morphology can be readily modified and tailor made on column to fit a particular separation. The review article will not only cover the various strategies developed so far but also describe their separation applications. To the best of our knowledge, this review article will be the first of its kind.

Gold nanoparticles-functionalized monolithic column for enantioseparation of eight basic chiral drugs by capillary electrochromatography

Poly(glycidyl methacrylate)-co-(ethylene dimethacrylate) [poly(GMA-co-EDMA)] monoliths were prepared, and used as a support to attach gold nanoparticles (AuNP) via Au-S bond. Pepsin, acting as a chiral selector, was linked to the surface of the carboxyl-modified AuNP through a hydrochloride/N-hydroxysuccinimide coupling reaction. The material was characterized by scanning electron microscopy, energy dispersive X-ray spectrometry, transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy and N₂ adsorption-desorption isotherm. The pepsin@AuNP@poly(GMA-co-EDMA) monolith showed preferable enantioselectivity for hydroxychloroquine (HCQ), chloroquine (CHQ), hydroxyzine (HXY), labetalol (LAB), nefopam (NEF), clenbuterol (CLE), amlodipine (AML) and chlorpheniramine (CHL) in capillary electrochromatography (CEC). These racemic drugs were monitored at the maximum absorption wavelength (220 nm for HXQ, CHQ, HXY, LAB, NEF; 240 nm for AML; 215 nm for CLE, CHL). In comparison with the pepsin@poly(GMA-co-EDMA) monolith loaded with 5 nm AuNP, the pepsin@poly(GMA-co-EDMA) monolith loaded with 13 nm AuNP shows significantly enhanced enantiomeric resolution (HCQ: 0.62 → 3.45; CHQ: 0.60 → 2.11; HXY: 0.49 → 2.30; LAB: 1.03 → 2.45, 1.45 → 3.46, 0 → 0.67; NEF: 0.53 → 1.29; CLE: 0.42 → 0.56; AML: 0 → 0.83; CHL: 0.24 → 0.55). Pepsin concentration, buffer pH value, buffer concentration and applied voltage were investigated in detail with (±) HCQ and (±) HXY as model analytes. The reproducibility of intra-day, inter-day and column-to-column were explored, and found to be satisfactory. Graphical abstractSchematic presentation of the preparation of gold nanoparticles (AuNP) modified.

Recent developments of monolithic and open-tubular capillary electrochromatography (2017-2019)

Capillary electrochromatography, which combined the high selectivity of high-performance liquid chromatography and the high separation efficiency of capillary electrophoresis, is an attractive separation tool. In this review, the developments on monolithic and open tubular capillary electrochromatography during 2017 to August 2019 are summarized. Considering the development of novel stationary phases is the most active research field in capillary electrochromatography, monolithic capillary electrochromatography is classified according to the polymer-based and hybrid monolithic columns, while open-tubular capillary electrochromatography is categorized by cyclodextrin, silica, polymer, nanomaterials, microporous materials, and biomaterials-based open tubular columns.

Fast fabrication and modification of polyoctahedral silsesquioxane-containing monolithic columns via two-step photo-initiated reactions and their application in proteome analysis of tryptic digests

A fast and robust approach was developed to fabricate and modify hybrid monolithic columns via two-step photo-initiated reactions. At first, acrylopropyl polyoctahedral silsesquioxane (acryl-POSS) and 3-(triallyl silyl) propyl acrylate (TAPA) were chosen as precursors to synthesize poly (POSS-co-TAPA) monolithic column (monolith I) via photo-initiated free-radical polymerization within 10 min, which left lots of allyl groups on the surface of monolith. Secondly, two thiol-containing compounds, penicillamine and 1-octadecanethiol (ODT), were introduced to modify the prepared poly (POSS-co-TAPA) column via photo-initiated thiol-ene click reaction within 20 min. Finally, three resulting monolithic columns were applied to separate phenolic, anilines and antibiotics mixtures. These mixtures were baseline-separated on the monolith modified with penicillamine (monolith II), exhibiting better selectivity than both pristine monolith I and that modified with ODT (monolith III). Additionally, these columns were further used for separation of tryptic digest of HeLa cells by cLC-MS/MS. The 5071 unique peptides mapped to 2442 proteins were identified from HeLa cells digest on monolith II, which were superior over those on monolith III, but slightly lower than those on monolith I. These results demonstrated that these POSS-containing columns exhibited great separation ability for complex samples.

Covalent organic framework incorporated chiral polymer monoliths for capillary electrochromatography

A covalent organic framework, Schiff base network-1 (SNW-1), was synthesized and incorporated into cellulase based poly(glycidyl methacrylate-co-ethylene dimethacrylate) (cellulase@poly(GMA-EDMA-SNW-1)) monolith to afford a novel chiral stationary phase for capillary electrochromatography (CEC). SNW-1 is attractive as a stationary phase for CEC because it not only features high surface areas but also provides conjugate structures and abundant amine groups to give π-π electrostatic stacking and hydrogen bonding property. Incorporation of SNW-1 into monolithic column could improve the column efficiency and increase the interactions between the tested racemates and the stationary phase thus significantly improved their CEC separation. The obtained monoliths were characterized by scanning electron microscopy, elemental analysis and nitrogen adsorption. Moreover, effects of SNW-1 concentration, immobilization pH of cellulase and CEC conditions were also investigated. Under the optimized conditions, the cellulase@poly(GMA-EDMA-SNW-1) monolith exhibited excellent enantioseparation performance for eight pairs of different classes of chiral drugs including β-blockers, antihistamines and anticoagulants. Satisfactory repeatability was achieved with relative standard deviations for intra-day, inter-day and column-to-column runs less than 4.5%, and batch-to-batch runs less than 6.8%. The experiment results reveal that the combination of the versatile features of monoliths and unique properties of SNW-1 could be a promising strategy for chiral separation.

Advances in capillary electro-chromatography

Capillary electrochromatography (CEC) is a micro-scale separation technique which is a hybrid between capillary electrophoresis (CE) and liquid chromatography (LC). CEC can be performed in packed, monolithic and open-tubular columns. In recent three years (from 2016 to 2018), enormous attention for CEC has been the development of novel stationary phases. This review mainly covers the development of novel stationary phases for open-tubular and monolithic columns. In particular, some biomaterials attracted increasing interest. There are no significant breakthroughs in technology and principles in CEC. The typical CEC applications, especially chiral separations are described.

Click chemistry at the microscale

This manuscript reviews recent developments in click chemistry in microscale systems.