Aqueous biphasic systems formed by deep eutectic solvent and new-type salts for the high-performance extraction of pigments

Aqueous biphasic systems developed with deep eutectic solvents and polymer for the efficient extraction of pigments from beverages

Novel aqueous biphasic systems (ABSs) developed with benzyl-based quaternary ammonium salts-deep eutectic solvents (DESs) and polypropylene glycol (PPG) were herein proposed. The liquid-liquid equilibrium and the partitioning behavior of pigments in the systems were addressed. The results suggested that the shorter the carbon chain length of the DES, the easier to form two phases. The analysis of mixed samples showed that the selective separation was achieved in the ABSs, including 99.47% of tartrazine in the DES-rich phase and 98.47% of sudan III in the PPG-rich phase. Additionally, the systems were successfully applied to the extraction of pigments from the actual beverage samples with recoveries ranging from 93.43% to 102.15%. Furthermore, the study on the separation mechanism indicated that the hydrogen bonding played a significant role in the separation process. All the above results highlight the proposed DES/polymer-based ABSs have great advantages in selective and high-performance separation of pigments from beverages.

Extraction of Gallic Acid and Ferulic Acid for Application in Hair Supplements

Food supplements based on antioxidants and vitamins are often prescribed to correct inefficiencies in the human diet and delay diseases such as premature aging and alopecia (temporary or permanent hair loss), given the free radical scavenging activity of these biomolecules. By reducing the concentration of reactive oxygen species (ROS), which promote abnormal hair follicle cycling and morphology, follicle inflammation and oxidative stress are reduced, minimising the effects of these health issues. Gallic acid (GA), which is significantly present in gallnuts and in pomegranate root bark, and ferulic acid (FA), commonly found in brown rice and coffee seeds, are very important antioxidants for the preservation of hair colour, strength and growth. In this work, these two secondary phenolic metabolites were successfully extracted in the Aqueous Two-Phase Systems (ATPS) {ethyl lactate (1) + trisodium citrate (2) + water (3)} and {ethyl lactate (1) + tripotassium citrate (2) + water (3)} at 298.15 K and 0.1 MPa, moving towards the application of these ternary systems in extracting antioxidants from biowaste and their a posteriori processing as food supplements for hair fortification. The studied ATPS provided biocompatible and sustainable media for the extraction of gallic acid and ferulic acid, yielding low mass losses (<3%) and contributing to an eco-friendlier production of therapeutics. The most promising results were obtained for ferulic acid, which attained maximum partition coefficients (K) of 15 ± 5 and (3 ± 2) · 10¹ and maximum extraction efficiencies (E) of (92.7 ± 0.4)% and (96.7 ± 0.4)% for the longest tie-lines (TLL = 69.68 and 77.66 m%) in {ethyl lactate (1) + trisodium citrate (2) + water (3)} and {ethyl lactate (1) + tripotassium citrate (2) + water (3)}, respectively. Moreover, the effect of pH on the UV-Vis absorbance spectra was studied for all the biomolecules to minimise errors in solute quantification. Both GA and FA were found to be stable at the used extractive conditions.

Fabrication and characterization of magnetic molecularly imprinted polymer based on deep eutectic solvent for specific recognition and quantification of vanillin in infant complementary food

A magnetic molecularly imprinted polymer based on deep eutectic solvent was synthesized for specific identification and quantification of vanillin. Fe₃O₄@SiO₂-CC and deep eutectic solvent were applied as the carrier of magnetic material and functional monomer, respectively. According to composition and morphology characterizations and adsorption kinetics, the imprinted polymer had excellent advantages on adsorption capacity and identification specificity for vanillin compared with non-imprinted polymer, while its reusability still remained stable. According to the high-performance liquid chromatography, the detection method based on imprinted polymer produced satisfactory analytical results. The limit of quantification was 0.2 μg·mL^-1. The mean spiked recoveries for vanillin ranged from 91.2% to 100.2% with intra- and inter-day precision were both less than 7.2%. Compared to traditional extraction methods, this method presented best adsorption and extraction performances. In summary, the method could be further applied to the specific separation and quantification of vanillin in infant complementary food.

Extraction and Stabilization of Betalains from Beetroot (Beta vulgaris) Wastes Using Deep Eutectic Solvents

Deep eutectic solvents (DES) using magnesium chloride hexahydrate [MgCl₂·6H₂O] and urea [U] proportions (1:1) and (2:1), were prepared for their use as extracting and stabilizer agents for red and violet betalains from beetroot (Beta vulgaris) waste. The synthetized DES [MgCl₂·6H₂O] [U] showed similar properties to eutectic mixtures, such as, liquid phase, low melting points and conductivity, thermal stability, and variable viscosity. In turn, betalain DES extracts (2:1) exhibited compatibility in the extraction and recovery of betalains from beetroot wastes, showing a betalain content comparable to that of betalain extracts. Betalain stability was determined by degradation tests; the exposure conditions were visible light (12 h), molecular oxygen from atmospheric air and environmental temperature (20–27 °C) for 40 days. The kinetic curves of the betalain degradation of water samples depicted a first-order model, indicating the alteration of a violet colouration of betalains from beetroot waste for 5–7 days. However, betalains from DES extracts were kept under visible light for 150 days, and for 340 days in storage (amber vessels), achieving a stability of 75% in comparison with initial beet extracts.

A Review of the Use of Eutectic Solvents, Terpenes and Terpenoids in Liquid–liquid Extraction Processes

Diverse and abundant applications of the eutectic solvents have appeared in the last years. Their promising tunable properties, eco-friendly character and the possibility of being prepared from numerous compounds have led to the publication of numerous papers addressing their use in different areas. Terpenes and terpenoids have been employed in the formulation of eutectic solvents, though they also have been applied as solvents in extraction processes. For their hydrophobic nature, renewable character, low environmental impact, cost and being non-hazardous, they have also been proposed as possible substitutes of conventional solvents in the separation of organic compounds from aqueous streams, similarly to hydrophobic eutectic solvents. The present work reviews the application of eutectic solvents in liquid–liquid extraction and terpenes and terpenoids in extraction processes. It has been made a research in the current state-of-the-art in these fields, describing the proposed applications of the solvents. It has been highlighted the scale-up feasibility, solvent regeneration and reuse procedures and the comparison of the performance of eutectic solvents, terpenes and terpenoids in extraction with conventional organic solvents or ionic liquids. Ultimately, it has been also discussed the employ of predictive methods in extraction, the reliability of thermodynamic models in correlation of liquid–liquid equilibria and simulation of liquid–liquid extraction processes.

New guidelines for testing "Deep eutectic solvents" toxicity and their effects on the environment and living beings

Deep eutectic solvents (DESs) were described at the beginning of this century as an alternative to ionic liquids (ILs) in green chemistry. Despite their obvious sustainable advantages as reaction media, there is still controversy about their potential toxicity. Most of the ecotoxicity assays done up to now involving DESs are based on antibiograms. This is not a good approach due to the high density and viscosity of most DESs already described. Additionally, antibiograms do not allow continuous monitoring of neither cellular growth nor changes on physicochemical parameters like culture acidification due to cellular growth or DESs metabolization. This work starts by displaying advantages and disadvantages of the DESs toxicity assays already reported. Then, using a new DES recently described and Escherichia coli as a model microorganism, liquid cultures with continuous monitoring of pH, temperature, shaking and optical density have been used, for the first time, to quantify potential toxicity of the DES as well as the degree of the cellular tolerance (in preadapted and non-preadapted cells). The results obtained show that this new DES is not toxic for E. coli at concentrations up to 300 mM and cellular preadaptation was crucial for the cells to grow. At concentrations between 300 mM and 450 mM, cells can tolerate this DES. Above 600 mM, the DES is toxic causing complete inhibition of growth. This toxicity is not only due to the chemical composition of the DES, but also due to the high acidification of the media caused by the DES hydrolysis during cellular growth. The consequences of sterilization procedures on the DES stability are also analysed into detail, finding that sterilization by autoclave promotes DES hydrolysis. From these results, new guidelines are proposed for furthers studies aiming to characterize and quantify DESs toxicity.

Aqueous biphasic systems formed by hydrophilic and hydrophobic deep eutectic solvents for the partitioning of dyes

Two kinds of hydrophobic deep eutectic solvents (DESs), including hexafluoroisopropanol (HFIP)-based DESs and polypropylene glycol 400 (PPG400)-based DESs, were synthesized to construct aqueous biphasic systems (ABSs) with choline chloride (ChCl)-based hydrophilic DESs for the first time, respectively. Three kinds of dyes with different hydrophobicity, including tartrazine, methylene blue and sudan Ⅲ, were chosen as the target analytes to evaluate the partitioning behaviors of the DES/DES ABSs. The effect of the types of hydrophilic DESs on dyes extraction were investigated and ChCl-glycol (ChCl-G) was selected as the phase-forming component. Then the partitioning of dyes in diverse DES/DES ABSs with different hydrophobicity was addressed by altering the carbon chain length of hydrogen bond accepter (HBA) in hydrophobic DES and changing the molar ratio of HBA: hydrogen bond donor (HBD) in hydrophilic DES. The results proved that in the ABSs of HFIP-based DES/DES, the sudan Ⅲ tended to migrate to the hydrophobic DES-rich phase with the increased carbon chain length of hydrophobic DES and was inclined to transfer to the hydrophilic DES-rich phase with the increasing proportion of G in ChCl-G. Afterwards, the methylene blue was chosen to explore the influence factors of the extraction process. And the results showed that the adjusting of pH value could achieve a complete opposite distribution of methylene blue in PPG400-based DES/DES ABSs. Besides, extraction of dyes in real samples were evaluated and recoveries of 92.3%-106.1% were achieved. Moreover, the analysis of mixed samples demonstrated that 88.64% of tartrazine and 92.63% of methylene blue were enriched into the hydrophilic phase, while nearly all of the sudan Ⅲ was moved into the hydrophobic phase. In addition, the phase-forming components could be reused according to the regeneration studies. Method validation proved the good precision, repeatability and stability of the established method. At last, the extraction mechanism was further investigated by dynamic light scattering (DLS) and transmission electron microscope (TEM). It turned out the formation of DES-dye aggregates might be responsible for the separation process. Above all, the results highlighted the possibility of the DES/DES ABSs as tunable systems for the partitioning of dyes with different hydrophobicity.