Development of on-line monolith-based in-tube solid phase microextraction for the sensitive determination of triazoles in environmental waters

Silver nanoparticle-functionalized melamine-formaldehyde aerogel for online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons followed by HPLC-DAD analysis

Based on the π-metal interaction between silver nanoparticles (AgNPs) and aromatic compounds, AgNPs were in-situ grown to melamine-formaldehyde (MF) aerogel for improving the extraction performance to polycyclic aromatic hydrocarbons (PAHs). The AgNPs/MF aerogel was regulated through varing the concentration of reactants, and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray powder diffraction. As a new extraction coating, the AgNPs/MF aerogel was coated to stainless-steel wires for in-tube solid-phase microextraction (IT-SPME). The extraction effects of MF aerogels before and after the modification of AgNPs were compared, and the AgNPs greatly improved the extraction ability for PAHs reaching to 166.4 %. Combining IT-SPME with high performance liquid chromatographic detection, an online analytical system was constructed. Furthermore, the sampling volume and rate, concentration of organic solvent, and desorption time were optimized factor by factor. The online analytical method with low detection limits (0.003-0.010 μg L-1) and efficient enrichment factors (1998-3237) for PAHs was established, which fastly detected trace level of PAHs in drinking and environmental water samples. Compared with other methods, the method was comparable or better in the detection limit and linear range, indicating prospective application of the AgNPs/MF aerogel for sample preparation.

Dispersive magnetic solid phase extraction of triazole fungicides based on polybenzidine/magnetic nanoparticles in environmental samples

A polybenzidine-modified Fe3O4@SiO2 nanocomposite was successfully synthesized through a chemical oxidation method and employed as a novel sorbent in dispersive magnetic solid phase extraction (DMSPE) for the preconcentration and determination of three triazole fungicides (TFs), namely diniconazole, tebuconazole, and triticonazole in river water, rice paddy soil, and grape samples. The synthesis method involved a polybenzidine self-assembly coating on Fe3O4@SiO2 magnetic composite. Characterization techniques such as FT-IR, XRD, FESEM, EDX, and VSM were used to confirm the correctness of the synthesized nano-sorbent. The target TFs were determined in actual samples using the synthesized nanocomposite sorbent in combination with gas chromatography-flame ionization detection (FID). Several variables were carefully optimized , including the sample pH, sorbent dosage, extraction time, ionic strength, and desorption condition (solvent type, volume, and time). Under the optimized experimental conditions, the method exhibited linearity in the concentration range 5-1000 ng mL-1 for triticonazole and 2-1000 ng mL-1 for diniconazole and tebuconazole. The limits of detection (LOD) for the three TFs were in the range 0.6-1.5 ng mL-1. The method demonstrated acceptable precision with intra-day and inter-day relative standard deviation (RSD) values of less than 6.5%. The enrichment factors ranged from 248 to 254. Finally, the method applicability was evaluated by determining TFs in river water, rice paddy soil, and grape samples with recoveries in the range 90.5-106, indicating that the matrix effect was negligible in the proposed DMSPE procedure.

Trace-Level Determination of Triazole Fungicides Using Effervescence-Assisted Liquid-Liquid Microextraction Based on Ternary Deep Eutectic Solvent Prior to High-Performance Liquid Chromatography

A simple and sensitive preconcentration method, namely, effervescence-assisted liquid-liquid microextraction based on the ternary deep eutectic solvent method, was developed for enrichment of triazole fungicide residues prior to their determination by high-performance liquid chromatography coupled with UV detection. In this method, a ternary deep eutectic solvent (as extractant) was prepared by combination of octanoic acid, decanoic acid, and dodecanoic acid. The solution was well dispersed with sodium bicarbonate (as effervescence powder) without using auxiliary devices. In order to obtain relatively high extraction efficiency, analytical parameters were investigated and optimized. Under optimum conditions, the proposed method showed good linearity within the range of 1-1000 μg L^-1 with a coefficient for determination (R²) greater than 0.997. The low limits of detection (LODs) were in the range of 0.3-1.0 μg L^-1. The precisions were assessed from the relative standard deviations (RSDs) of retention time and peak area obtained from intra- (n = 3) and inter-day (n = 5 × 5) experiments, which were greater than 1.21 and 4.79%, respectively. Moreover, the proposed method provided high enrichment factors ranging from 112 to 142 folds. A matrix-match calibration method was used for analysis of real samples. Finally, the developed method was successfully applied for determination of the triazole fungicide in environmental water (near agricultural area), honey, and bean samples, and it represents a promising alternative method for analysis of triazoles. The recoveries of the studied triazoles were obtained in the range of 82-106% with an RSD less than 4.89.

An In Situ Formation of Ionic Liquid for Enrichment of Triazole Fungicides in Food Applications Followed by HPLC Determination

An in situ formation of ionic liquid was used for preconcentration of four triazole fungicides in food samples. The microextraction method was used for the first time in the literature for preconcentration of triazole fungicides. In the developed method, tributylhexadecylphosphonium bromide ([P₄₄₄₁₂]Br) and potassium hexafluorophosphate (KPF₆) were used for the formation of hydrophobic ionic liquid. After centrifugation, the fine microdroplets were produced in one step, providing the extraction step in a quick and environmentally friendly manner. The functional group of the hydrophobic ionic liquid was investigated using FT-IR. Various extraction parameters were studied and optimized. In the extraction method, 0.01 g of [P₄₄₄₁₂]Br and 0.01 g of KPF₆, centrifugation at 4500 rpm for 10 min were used. The optimized technique provided a good linear range (90-1000 μg L^-1) and high extraction recovery, with a low limit of detection (30-50 μg L^-1). Methods for the proposed in situ formation of ionic liquid were successfully applied to honey, fruit juice, and egg matrices. The recoveries were obtained in a satisfactory range of 62-112%. The results confirmed the suitability of the proposed microextraction method for selective extraction and quantification of triazole fungicides.

A novel polyhedral oligomeric silsesquioxane-based hybrid monolith as a sorbent for on-line in-tube solid phase microextraction of bisphenols in milk prior to high performance liquid chromatography-ultraviolet detection analysis

An on-line in-tube solid-phase microextraction (in-tube SPME) coupled with high-performance liquid chromatography (HPLC) method was proposed based on a novel polyhedral oligomeric silsesquioxane (POSS)-hybrid monolith for the determination of four bisphenols (BPs) in milk. The monolith was synthesized using acrylamide (AM) and monomethacrylate-functionalized POSS (mono-MA-POSS) as functional monomers to copolymerize with ethylene dimethacrylate (EDMA). Due to the abundant hydrogen bonding, π-π and hydrophobic interaction sites, the synthetic monolith displayed satisfying extraction performance for target BPs. Under the optimized conditions, the developed on-line in-tube SPME-HPLC method exhibited low limits of detection (LODs) (0.030-0.055 ng mL^-1). The spiked recoveries were between 85.4 % and 111.8 %, and the relative standard deviations (RSDs) were less than 3.5 % for all the analytes. The results showed that the proposed method provided alternative for the analysis of BPs in complex samples.

Extraction and electrochemical sensing of pesticides in food and environmental samples by use of polydopamine-based materials

Polydopamine has high adsorption capacities for pollutants such as pesticides in food and environmental matrices. Consequently, it has found applications in some sorbent-based micro-extraction techniques such as solid phase micro-extraction and magnetic solid phase extraction. This paper gives a detailed review of the application of polydopamine-based adsorbents for the extraction of pesticides in food and environmental matrices using these techniques. The adhesive properties of polydopamine have made it to be a suitable material for the immobilisation of the components of electrochemical sensors used to detect pesticides in food and environmental matrices. This paper also gives a comprehensive review on the application of polydopamine in electrochemical sensors such as acetylcholinesterase sensors, molecularly imprinted sensors and aptasensors. The use of polydopamine-based adsorbents during the extraction and electrochemical sensing of pesticides in food and environmental matrices is not free of challenges. In this review, the challenges encountered during the use of polydopamine-based adsorbents are also discussed.

Application of magnetic nanomaterials in magnetic in-tube solid-phase microextraction

Development of magnetic nanomaterials has greatly promoted the innovation of in-tube solid-phase microextraction. This review article gives an insight into recent advances in the modifications and applications of magnetic nanomaterials for in-tube solid-phase microextraction. Also, different magnetic nanomaterials which have recently been utilized as in-tube solid-phase microextraction sorbents are classified. This study shows that magnetic nanomaterials have gained significant attention owing to large specific surface area, selective absorption, and surface modification. Magnetic in-tube solid-phase microextraction has been applied for the analysis of food samples, biological, and environmental. However, for full development of magnetic in-tube SPME, effort is still needed to overcome limitations, such as mechanical stability, selectivity and low extraction efficiency. To achieve these objectives, research on magnetic in-tube SPME is mainly focused in the preparation of new extractive phases.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Determination of Volatile Water Pollutants Using Cross-Linked Polymeric Ionic Liquid as Solid Phase Micro-Extraction Coatings

Ionic liquids found a wide application in catalysis and extraction due to their unique properties. Herein, ethylene glycol dimethacrylate as the cross-linker and 1-vinyl-3- butylimidazolium tetrafluoroborate as functional monomer via thermally initiated free-radical polymerization was prepared as a novel copolymer solid phase micro-extraction (SPME) coating. A surface modified stainless-steel wire was implemented as the substrate. Factors affecting the extraction performances of the copolymer, including the molar ratio of monomers to cross-linkers, the amount of porogen agent, and polymerization time were evaluated and optimized. To evaluate the extraction performance, five commonly seen polycyclic aromatic hydrocarbons (PAHs) were taken as the analytical targets. The potential factors affecting extraction efficiency were optimized. The as-prepared SPME device, coupled with gas chromatography, was successfully applied for the determination of PAHs in water samples. The wide linear range, low detection limit, good reproducibility, selectivity, and excellent thermal stability indicate the promising application of the newly developed SPME fiber in environmental monitoring as well as in other samples having complex matrices.

Analytical methods to analyze pesticides and herbicides

Presented in this paper is an annual review of literatures published in 2018 on topics relating to analytical methods for pesticides and herbicides. According to the different techniques, this review is divided into six sections, including extraction methods; chromatographic or mass spectrometric techniques; electrochemical techniques; spectrophotometric techniques; chemiluminescence and fluorescence methods; and biochemical assays. PRACTITIONER POINTS: Totally 134 relevant research articles are summarized. The review is divided into six parts according to the techniques. Chromatographic and mass spectrometric methods are the most widely used.

Facile synthesis of magnetic zinc metal-organic framework for extraction of nitrogen-containing heterocyclic fungicides from lettuce vegetable samples

We present a simple method for the fabrication of a magnetic amino-functionalized zinc metal-organic framework based on a magnetic graphene oxide composite. The resultant framework exhibited a porous 3D structure, high surface area and good adsorption properties for nitrogen-containing heterocyclic fungicides. The adsorption process and capacity indicated that the primary adsorption mechanism might be hydrogen bonding and π-π conjugation. In addition, an optimized protocol for magnetic solid phase extraction was developed (such as adsorbent content, pH, and desorption solvent), and utilized for the extraction of nitrogen-containing heterocyclic fungicides from vegetable samples. Quantitation by high performance liquid chromatography coupled with tandem mass spectrometry offered a detection limit of 0.21-1.0 μg/L (S/N = 3) with correlation coefficients larger than 0.9975. These results demonstrate that magnetic amino-functionalized zinc metal-organic framewor is a promising adsorbent for the extraction and quantitation of nitrogen-containing heterocyclic fungicides.

Efficient enrichment of triazole fungicides from fruit and vegetable samples by a spherical porous aromatic framework

A porous aromatic framework was synthesized and utilized as a novel SPME coating for efficient enrichment of triazole fungicides.

An organic-inorganic hybrid silica aerogel prepared by co-precursor method for solid-phase microextraction coating

In order to improve the extraction performance of silica aerogel, an organic-inorganic hybrid silica aerogel was developed as the coating of solid-phase microextraction (SPME). It was prepared via the co-precursor reaction between tris(triethoxysilylpropyl)amine and tetraethyl orthosilicate. Coupled with gas chromatography, the hybrid silica aerogel-coated SPME fiber was evaluated using polycyclic aromatic hydrocarbons (PAHs). Compared to silica aerogel, the hybrid silica aerogel displayed better extraction performance, peak areas of PAH analytes were increased by about 2 times. The affecting parameters including extraction time, extraction temperature, ionic strength, stirring rate and desorption time were optimized, and an analytical method was established with wide linear ranges (0.005-20 μg L^-1, 0.010-20 μg L^-1, 0.100-20 μg L^-1), good correlation coefficients (0.9967-0.9994), low limits of detection (0.001-0.030 μg L^-1) and limits of quantitation (0.005-0.100 μg L^-1). Satisfactory extraction repeatability (RSD≤6.1%, n = 3) and preparation repeatability (RSD ≤ 9.8%, n = 3) were also obtained. Compared to the reported coatings and the commercial coating, the organic-inorganic hybrid silica aerogel has higher or comparable sensitivity, better repeatability, and shorter extraction time and longer service life. The established method was used for the detection of lake water and rain water, and some targets were quantified successfully.

3D cryogel composites as adsorbent for isolation of protein and small molecules

A green and promising sample pretreatment method was successfully established, which efficiently isolated proteins and small molecules in human serum. This method was achieved based on the multifunctional polymer, cryogel, as a solid phase extraction (SPE) monolith easily equipped in a syringe. The cryogel (pDC/GO-DE) was composed of diallyldimethyl ammonium chloride (DC) and 2-hydroxyethyl methacrylate (HE), which was further modified with graphene oxide (GO) and N-diethylethanamine hydrobromide (DE). Various proteins, including bovine serum albumin (BSA), lysozyme (Lys), γ-globulins, immunoglobulin G (IgG), transferrin, small molecules (ribavirin, adenosine, ofloxacin, estriol, rutin, amoxicillin, ibuprofen, 1-methyl-3-phenyl-propylamine, and benzylamine) and their mixtures were successively studied as model analytes to evaluate the new material and demonstrate the isolation mechanism, which was mainly dependent on mixed-mode ion-exchange and the hybrid hydrophobicity-hydrophilicity property of pDC/GO-DE cryogel. Moreover, the three-dimensional macroporous structure contributed to the underlying size-selective isolation. When 10 times diluted human serum was used as the sample, more than 95% of proteins were adsorbed within 10 min under physiological conditions, and the interference matrix in serum was also efficiently reduced. After recycling three times, the extraction ratio of proteins in human serum was still higher than 90%. When four small molecules (camptothecin, ribavirin, 1-methyl-3-phenylpropylamine and ofloxacin) were added to blank human serum, their recoveries were within 65.6-81.8%, and were comparable to those obtained by protein precipitation method (63.7-83.2%).