A new strategy for the modification of a carbon paste electrode with carrageenan hydrogel for a sensitive and selective determination of arsenic in natural waters

Nanostructured electrochemical sensor applied to the electrocoagulation of arsenite in WWTP effluent

A sensitive electroanalytical method for the determination of arsenite, based on a heterostructure of aminated multiwalled carbon nanotubes and gold nanoparticles, was applied in an electrocoagulation (EC) treatment for the elimination of arsenite. A sensitive quantitative response was obtained in the determination of As³⁺ in a secondary effluent from a wastewater treatment plant from Santiago (Chile). The preconcentration stage was optimized through a Central Composite Face design, and the most sensitive peak current was obtained at 200 s and -600 mV of time and accumulation potential, respectively, after a differential pulse voltammetry sweep. Electroanalytical determination was possible in an interval between 42.89 and 170.00 μg L^-1 with a detection limit of 0.39 μg L^-1, obtaining recoveries over 99.1%. The developed method was successfully applied in an electrocoagulation treatment to remove 250 μg L^-1 of arsenite from a polluted effluent in a batch system. Complete arsenite removal was achieved using a steel EC system with a current density of 6.0 mA cm^-2 in less than 3 min of treatment.

A comprehensive review on the removal of noxious pollutants using carrageenan based advanced adsorbents

Rapid industrial development is associated with high discharge of toxic pollutants into the environment. The industries discharge their wastewater containing organic pollutants directly into the water system without treating them that has posed many serious threats to environmental protection. The use of bioadsorbents for the removal of such toxic pollutants from the waste water due to its simple synthesis, easy operation, effectiveness, and economic viability have emerged a new dimension in the wastewater treatment approaches. Various adsorbents have been prepared to examine their adsorption capacity against different adsorbates, but, to attain sustainability, biocompatibility, and biodegradation, bio-adsorbents have been found to won the battle. Seaweed derived polysaccharide; Carrageenan (CR) has been proven to be an excellent adsorbent for the wastewater treatment. It has been successfully modified with various components to form CR based-magnetic composites, hydrogels, nanoparticle modified CR composites and many others to enrich and diversify its properties. In this review, we have explained the adsorption behaviour of various carrageenan based adsorbents for the removal of different dyes. The influence of various parameters such as the effect of initial concentration, adsorbent dosage, contact time, pH, temperature, and ion concentration on dye adsorption is well explained. This paper also summarizes the structure, morphology, swelling ability, and thermal stability of carrageenan. The data also expounds on the adsorption capacity, kinetic model, isotherm model, and nature of the adsorption process. Different types of solvents are used for the regeneration and reusability of carrageenan adsorbents and their regeneration studies and desorption efficiency is well-explained. The adsorption mechanism of dyes onto carrageenan based adsorbents has been well described in this review. This review provides a deep insight about the use of carrageenan based adsorbents for the wastewater treatment.

Electrochemical investigations and theoretical studies of biocompatible niacin-modified carbon paste electrode interface for electrochemical sensing of folic acid

The modified electrode–analyte interaction is critical in establishing the sensing mechanism and in developing an electrochemical sensor. Here, the niacin-modified carbon paste electrode (NC/CPE) was fabricated for electrochemical sensing applications. The two stable structures of the niacin were optimized and confirmed by the absence of negative vibrational frequency, at B3LYP and B3LYP-GD3BJ level and 6–311 g** basis set. The physical and quantum chemical quantities were used to explain the molecular stability and electronic structure-related properties of the niacin. The natural bond orbital (NBO) analysis was performed to disclose the donor–acceptor interactions that were a critical role in explaining the modifier–analyte interaction. The fabricated NC/CPE was used for the determination of folic acid (FA) in physiological pH by cyclic voltammetry (CV) method. The limit of detection (LOD) for FA at NC/CPE was calculated to be 0.09 µM in the linear concentration range of 5.0 µM to 45.0 µM (0.2 M PBS, pH 7.4) by CV technique. The analytical applicability of the NC/CPE was evaluated in real samples, such as fruit juice and pharmaceutical sample, and the obtained results were acceptable. The HOMO and LUMO densities are used to identify the nucleophilic and electrophilic regions of niacin. The use of density functional theory-based quantum chemical simulations to understand the sensory performance of the modifier has laid a new foundation for fabricating electrochemical sensing platforms.

A electrochemical biosensor for As(III) detection based on the catalytic activity of Alcaligenes faecalis immobilized on a gold nanoparticle-modified screen-printed carbon electrode

A electrochemical biosensor for As(III) determination has been developed by immobilization of the Alcaligenis faecalis bacteria on gold nanoparticle-modified screen-printed carbon electrode (AuNPs-SPCE). The detection of As(III) is due to the catalytic activity of arsenite oxidase enzyme which oxidizes As(III) to As(V) producing an analytical signal. To enhance the performance of the biosensor, was optimized the amount of bacteria, amount of glutaraldehyde and incubation time applied in the preparation of the electrode, in addition to the effect of pH and applied potential. The analytical application was carried out applying 300 mV (pH = 7) obtaining a LOD of 6.61 μmol L^-1 (R = 0.9975) and 700 mV (pH = 12) obtaining a LOD of 1.84 μmol L^-1 (R = 0.9983). AF/AuNPs-SPCE was applied to the determination of total arsenic in Loa river water samples after reduction, with satisfactory results.

Comparative Electroanalytical Studies of Graphite Flake and Multilayer Graphene Paste Electrodes

In this paper, the fabrication, surface characterisation and electrochemical properties of graphite flake (GFPE) and multilayer graphene (MLGPE) paste electrodes are described. The Raman investigations and scanning electron microscopy were used to analyze and compare structure of both carbon materials. The electroanalytical performance of both electrodes was examined and compared on the basis of the square-wave and cyclic voltammetric behavior of acetaminophen and model redox systems. Results of those studies revealed that GFPE has a larger electroactive surface area and better conductive properties, whilst MLGPE demonstrate better analytical characteristic in case of acetaminophen (AC) determination. AC determination was developed using square wave voltammetry (SWV) and square wave stripping voltammetry (SWSV). For both working electrodes, the process of accumulation enabled us to obtain an extended linear range and to lower the detection limit. In pharmaceutical formulations, AC was determined with good recovery.