Magnetic polyethyleneimine functionalized reduced graphene oxide as a novel magnetic sorbent for the separation of polar non-steroidal anti-inflammatory drugs in waters

A novel electrochemical aptasensor based on AgPdNPs/PEI-GO and hollow nanobox-like Pt@Ni-CoHNBs for procymidone detection

Herein, an aptasensor based on a signal amplification strategy was developed for the sensitive detection of procymidone (PCM). AgPd nanoparticles/Polenimine Graphite oxide (AgPdNPs/PEI-GO) was weaned as electrode modification material to facilitate electron transport and increase the active sites on the electrode surface. Besides, Pt@Ni-Co nanoboxes (Pt@Ni-CoHNBs) were utilized to be carriers for signaling tags, after hollowing ZIF-67 and growing Pt, the resulting Pt@Ni-CoHNBs has a tremendous amounts of folds occurred on the surface, enables it to carry a larger quantity of thionine, thus amplify the detectable electrochemical signal. In the presence of PCM, the binding of PCM to the signal probe would trigger a change in electrical signal. The aptasensor was demonstrated with excellent sensitivity and a low detection limit of 0.98 pg·mL-1, along with a wide linear range of 1 μg·mL-1 to 1 pg·mL-1. Meanwhile, the specificity, stability and reproducibility of the constructed aptasensor were proved to be satisfactory.

A magnetic molecularly imprinted polymer based on an eco-friendly deep eutectic solvent for the selective recognition of dichlorodiphenyl trichloroethane and its degradation products in fruits and vegetables

A new magnetic molecularly imprinted polymer was successfully synthesized using a ternary deep eutectic solvent derived from caffeic acid-choline chloride-formic acid as a functional monomer, thymol-menthol deep eutectic solvent as a template, ethylene glycol dimethacrylate as a cross-linker, potassium peroxodisulfate as an initiator, and aqueous ethanol solution (90% (v/v)) as a porogen. The synthesized material was characterized and applied for magnetic solid-phase extraction of dichlorodiphenyl trichloroethane and its degradation products. Optimization of the extraction condition was carried out using the central composite design and response surface methodology. The good analytical performance of magnetic solid phase extraction/gas chromatography‒mass spectrometry using the proposed adsorbent shows a wide linear range of 0.07-500 ng g-1 with R2 greater than 0.992. Low detection limits and quantitation limits were observed in the ranges of 0.01-2.00 ng g-1 and 0.07-2.50 ng g-1, respectively. The precisions shown in terms of relative standard deviations were lower than 7.0% for intraday (n=5) and 8.6% for interday (n=5 × 3) experiments. The proposed method was applied for preconcentration and determination of dichlorodiphenyl trichloroethane and its degradation products in fruit and vegetable samples. The satisfactory recoveries of the real samples at three spiked concentrations were obtained in the range of 79.1%-110.9% with RSDs lower than 7.5%. The findings highlight the importance of developing efficient sorbents for the enrichment of persistent organic pollutants in food matrices.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

Fabrication of polyethyleneimine functionalized magnetite nanoparticles for recyclable recovery of fucoidan from aqueous solution

Fucoidan is a kind of natural water-soluble fucose-rich sulfated polysaccharide with promising applications in the food and pharmaceutical industry. However, the traditional methods for fucoidan recovery from aqueous solution are expensive, time-consuming, and environmentally unfriendly. In this work, polyethyleneimine functionalized magnetite nanoparticles (PEI-MNPs) with well-defined core-shell structures were prepared by a Layer-by-Layer (LbL) approach using sodium tripolyphosphate (STPP) as a cross-linker. The as-prepared PEI-MNPs showed improved adsorption capability towards fucoidan at pH 4-8 due to the high density of cationic groups on the surfaces and the absence of internal pores. It was found that the adsorption process of fucoidan onto PEI-MNPs can reach to equilibrium in 50 min at room temperature. The maximum qe derived from the Langmuir isotherm at room temperature was 169.1 mg per g at a pH of 7. A selective fucoidan capture over a model protein BSA can be realized by adjusting pH (6-8) and salt concentration (0.5-2.5 M). The PEI-MNPs loading with fucoidan can be isolated from the final products by a neodymium magnet and regenerated by 4 M NaCl solution as stripping reagent. Therefore, this novel kind of PEI-MNP could be a promising candidate for highly efficient and recyclable recovery of fucoidan from an aqueous solution.

Amine-bilayer-functionalized cellulose-chitosan composite hydrogel for the efficient uptake of hazardous metal cations and catalysis in polluted water

Herein, we represent a novel ecofriendly bilayer-amine group incorporated microcrystalline cellulose (MCC)/chitosan (CS) hydrogel, fabricated via integrating polydopamine (PDA) and polyethyleneimine (PEI) for reliable and effective extraction of copper (Cu²⁺), zinc (Zn²⁺), and nickel (Ni²⁺) ions from effluents. Owing to abundant adsorptive sites, the MCC-PDA-PEI/CS-PDA-PEI hydrogel showed excellent Cu²⁺, Zn²⁺, and Ni²⁺ adsorbabilities of ~434.8, ~277.7, and ~261.8 mg/g, respectively, in a single-ion adsorption system with the adsorption kinetics and isotherm complied with pseudo-second-order and Langmuir models, respectively. In a multi-ion adsorption system, hydrogel removes mixed metal cations with slightly higher selectivity for Cu²⁺. In accordance with X-ray photoelectron and Fourier-transform-infrared spectrometric analyses, a plausible binding mechanism of metal cations on the as-prepared hydrogel was proposed by chelation between hydrogel functional groups and metal ions. In the repetitive adsorption/desorption experiments, the hydrogel retained >40% metal ion adsorption and desorption capacities after four cycles. Furthermore, the Cu²⁺-adsorbing hydrogel could serve as a support for the in situ development of Cu nanoparticles, which showed excellent catalytic performance as demonstrated by the transformation of 4-nitrophenol (4-NP) to 4-aminophenol. This work provides a novel ecofriendly, reusable, and highly-efficient adsorbent, as well as a biocatalyst for remediation of heavy metal cations and 4-NP polluted effluents.

Fe3O4@PDA@PEI Core-Shell Microspheres as a Novel Magnetic Sorbent for the Rapid and Broad-Spectrum Separation of Bacteria in Liquid Phase

Bacterial infection is a significant cause of morbidity and mortality to humans worldwide. Thus, a method for nonspecific, sensitive, and rapid enrichment of such bacteria is essential for bacteria detection and treatment. This study demonstrates a self-made core-shell Fe3O4@Polydopamine@Polyethyleneimine magnetic beads (Fe3O4@PDA@PEI MBs) with a high density positive charge-based magnetic separation scheme for the broad-spectrum rapid enrichment of microorganisms in the liquid phase. MBs with a high-density positive charge have a strong electrostatic attraction to most microorganisms in nature. Our scheme is as follows: (1) wrapping dopamine (DA) on the iron oxide through self-polymerization and wrapping PEI on the outermost shell layer in a mode of crosslinking with the PDA; (2) subsequently, the Fe3O4@PDA@PEI MBs were used to concentrate microorganisms from the sample solution; (3) performing magnetic separation and calculating the adsorption efficiency. The as-prepared Fe3O4@PDA@PEI MBs composite was carefully characterized by zeta potential analysis, Value stream-mapping (VSM), transmission electron microscopy (TEM), and Fourier transforms infrared spectrometry (FT-IR). In this study, both gram-positive and gram-negative bacteria could be captured in three minutes through electrostatic interaction. Furthermore, the adsorption efficiency on gram-negative (>98%) is higher than that on gram-positive (>95%), allowing for a simple, rapid assay to enrich organisms in resource-limited settings.

An Electrochemical Molecularly Imprinted Polymer Sensor for Rapid β-Lactoglobulin Detection

Facile detection of β-lactoglobulin is extraordinarily important for the management of the allergenic safety of cow's milk and its dairy products. A sensitive electrochemical sensor based on a molecularly imprinted polymer-modified carbon electrode for the detection of β-lactoglobulin was successfully synthesized. This molecularly imprinted polymer was prepared using a hydrothermal method with choline chloride as a functional monomer, β-lactoglobulin as template molecule and ethylene glycol dimethacrylate as crosslinking agent. Then, the molecularly imprinted polymer was immobilized on polyethyleneimine (PEI)-reduced graphene oxide (rGO)-gold nanoclusters (Au-NCs) to improve the sensor's selectivity for β-lactoglobulin. Under optimal experimental conditions, the designed sensor showed a good response to β-lactoglobulin, with a linear detection range between 10-9 and 10-4 mg/mL, and a detection limit of 10-9 mg/mL (S/N = 3). The developed electrochemical sensor showed a high correlation in the detection of β-lactoglobulin in four different milk samples from the market, indicating that the sensor can be used with actual sample.

Applications of covalent organic frameworks and their composites in the extraction of pesticides from different samples

Pesticides are used extensively in a wide range of applications and due to their high rate of consumption, they are ubiquitous in the different media and samples like environment, water sources, air, soil, biological materials, wastes (liquids, solids or sludges), vegetables and fruits, where they can persist for long periods. Pesticides often have hazardous side effects and can cause a range of harmful diseases like Parkinson, Alzheimer, asthma, depression and anxiety, cancer, etc, even at low concentrations. To this end, extraction, pre-concentration and determination of pesticides from various samples presents significant challenges caused by sample complexity and the low concentrations of them in many samples. Often, direct extraction and determination of pesticides are impossible due to their low concentrations and the complexity of samples. The main goals of sample preparation are removing interfering species, pre-concentrating target analyte/s and converting the analytes into more stable forms (when needed). The most popular approach is solid-phase extraction due to its simplicity, efficiency, ease of operation and low cost. This method is based on using a wide variety of materials, among which covalent organic frameworks (COFs) can be identified as an emerging class of highly versatile materials exhibiting advantageous properties, such as a porous and crystalline structure, pre-designable structure, high physical and chemical stability, ease of modification, high surface area and high adsorption capacity. The present review will cover recent developments in synthesis and applications of COFs and their composites for extraction of pesticides, different synthesis approaches of COFs, possible mechanisms for interaction of COFs-based adsorbents with pesticides and finally, future prospects and challenges in the fabrication and utilization of COFs and their composites for extraction of pesticides.

Nanoplatform-Integrated Miniaturized Solid-Phase Extraction Techniques: A Critical Review

Preparation of the biological samples is one of the most critical steps in sample analysis. In past decades, the liquid-liquid extraction technique has been used to extract the desired analytes from complex biological matrices. However, solid-phase extraction (SPE) gained popularity due to versatility, simplicity, selectivity, reproducibility, high sample recovery %, solvent economy, and time-saving nature. The superior extraction efficiency of SPE can be attributed to the development of advanced techniques, including the nanosorbents technology. The nanosorbent technology significantly simplified the sample preparation, improved the selectivity, diversified the application, and accelerated the sample analysis. This review critically expands on the to-date advancements reported in SPE with particular regards to the nanosorbent technology.

Fabrication of polyethyleneimine modified magnetic microporous organic network nanosphere for efficient enrichment of non-steroidal anti-inflammatory drugs from wastewater samples prior to HPLC-UV analysis

Development of novel functionalized adsorbents for efficient magnetic solid phase extraction (MSPE) is essential for promoting their versatile applications in sample pretreatment. Herein, we report the fabrication of a new polyethyleneimine-600 decorated magnetic microporous organic network nanosphere (Fe₃O₄@MON-PEI₆₀₀) for effective MSPE of trace non-steroidal anti-inflammatory drugs (NSAIDs) from different water samples. The core-shelled Fe₃O₄@MON-PEI₆₀₀ integrates the synergistic effects of Fe₃O₄, MON and PEI₆₀₀, providing facile and effective extraction to NSAIDs via multiple hydrogen bonding, π-π and hydrophobic interactions. The inner MON shell employs π-π and hydrophobic interaction sites and the outer PEI-600 coat acts as the hydrogen bonding doner/receptor, which affords good extraction performance for NSAIDs. Under optimal conditions, the Fe₃O₄@MON-PEI₆₀₀-MSPE-HPLC-UV method gives wide linear range (0.14-400 μg L^-1), low limits of detection (0.042-0.149 μg L^-1), good precisions (intra-day and inter-day RSDs < 4.5%, n = 6), and large enrichment factors (97.0-98.2). Extraction mechanisms and selectivity of Fe₃O₄@MON-PEI₆₀₀ are evaluated in detail. Moreover, Fe₃O₄@MON-PEI₆₀₀ is successfully applied to enrich the trace NSAIDs in different water samples with the concentrations of 0.7 and 0.8 μg L^-1 for 1-naphthylacetic acid, 0.5 and 0.1 μg L^-1 for naproxen as well as 0.7 μg L^-1 for ibuprofen, respectively. The developed method not only affords a novel and efficient magnetic adsorbent for NSAIDs in aqueous media at trace level, but also provides a new strategy for the rational design and synthesis of multiple functionalized MON composites in sample pretreatment.

Magnetic N-rich carbon nitride framework material for the high selectivity extraction and determination of La(III)

A novel magnetic C₃N₅ framework material (Fe₃O₄/C₃N₅) was developed as a high selectivity extractant for La(III) determination in food samples. The Fe₃O₄/C₃N₅ material was synthesized by thermal deammoniation method and has larger surface area (100.3 m² g^-1) and more effective adsorption sites compared with that of individual C₃N₅ material (19.4 m² g^-1). It was proved that Fe₃O₄/C₃N₅ material displayed excellent selectivity and adsorption capacity for La(III). In addition, adsorption isotherm and kinetic data indicated that La(III) adsorption based on Fe₃O₄/C₃N₅ material is a monolayer adsorption which is compatible with Langmuir model and follows a pseudo-second-order kinetic equation. By using Fe₃O₄/C₃N₅ material as extractant, an analytical method was established with low limits of detection (3σ, n = 6) of 10.4 μg L^-1, reasonable recoveries ranged from 86% to 106% and good precision with the RSD less than 10.7%. The analytical method was further applied to the determination of trace La(III) in food sample. It evinced that the concentration of La(III) in sea fish is 13.2 μg kg^-1 and the content of ¹³⁸La is 0.138 μg kg^-1, which is 1.03% of total La(III).

Application of magnetic nanomaterials in bioanalysis

The importance of magnetic nanomaterials and magnetic hybrid materials, which are classified as new generation materials, in analytical applications is increasingly understood, and research on the adaptation of these materials to analytical methods has gained momentum. Development of sample preparation techniques and sensor systems using magnetic nanomaterials for the analysis of inorganic, organic and biomolecules in biological samples, which are among the samples that analytical chemists work on most, are among the priority issues. Therefore in this review, we focused on the use of magnetic nanomaterials for the bioanalytical applications including inorganic and organic species and biomolecules in different biological samples such as primarily blood, serum, plasma, tissue extracts, urine and milk. We summarized recent progresses, prevailing techniques, applied formats, and future trends in sample preparation-analysis methods and sensors based on magnetic nanomaterials (Mag-NMs). First, we provided a brief introduction of magnetic nanomaterials, especially their magnetic properties that can be utilized for bioanalytical applications. Second, we discussed the synthesis of these Mag-NMs. Third, we reviewed recent advances in bioanalytical applications of the Mag-NMs in different formats. Finally, recently literature studies on the relevance of Mag-NMs for bioanalysis applications were presented.

Overview of Sample Preparation and Chromatographic Methods to Analysis Pharmaceutical Active Compounds in Waters Matrices

In the environment, pharmaceutical residues are a field of particular interest due to the adverse effects to either human health or aquatic and soil environment. Because of the diversity of these compounds, at least 3000 substances were identified and categorized into 49 different therapeutic classes, and several actions are urgently required at multiple steps, the main ones: (i) occurrence studies of pharmaceutical active compounds (PhACs) in the water cycle; (ii) the analysis of the potential impact of their introduction into the aquatic environment; (iii) the removal/degradation of the pharmaceutical compounds; and, (iv) the development of more sensible and selective analytical methods to their monitorization. This review aims to present the current state-of-the-art sample preparation methods and chromatographic analysis applied to the study of PhACs in water matrices by pinpointing their advantages and drawbacks. Because it is almost impossible to be comprehensive in all PhACs, instruments, extraction techniques, and applications, this overview focuses on works that were published in the last ten years, mainly those applicable to water matrices.

Recent advances in the application of magnetic Fe3O4 nanomaterials for the removal of emerging contaminants

Emerging contaminants (ECs) are widely distributed and potentially hazardous to human health and the ecological system. However, traditional wastewater treatment techniques are not sufficient to remove ECs. Magnetic nanomaterials are made of ferromagnetic or superparamagnetic magnetic elements such as iron and nickel, which can be easily separated from the aqueous solution, making them ideal adsorbents for contaminants in water. This review focused on the synthesis approaches of magnetic Fe₃O₄ nanoparticles (MFNs), as well as surface modification in order to improve their stability and functional diversity. Also, a detailed summary on the state-of-art application of magnetic nanomaterials on the removal of ECs was addressed. Additionally, challenges and future prospective of applying magnetic nanomaterials into real-world cases were discussed, in which the green and simple synthesis and evaluation of the toxic effects of MFNs are still of great challenge. This work summarizes the recent progress of using magnetic nanomaterials as promising and powerful tools in the treatment of ECs-contaminated water, benefiting researchers interested in nanomaterials and environmental studies.

Gas Chromatographic and Spectrophotometric Determination of Diclofenac Sodium, Ibuprofen, and Mefenamic Acid in Urine and Blood Samples

Objectives

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely used for the treatment of acute to chronic pain. A simple, fast, and reliable gas chromatographic (GC) method with flame ionization detection has been developed for the determination of NSAIDs such as diclofenac sodium, ibuprofen, and mefenamic acid after derivatization with ethyl chloroformate.

Materials and Methods

The GC conditions were optimized as elution from a DB-1 column (30 mx0.32 mm id) at column temperature 150 °C for 3 min, followed by a heating rate of 20 °C/min up to 280 °C and a hold time of 5 min. The nitrogen flow rate was 2.5 mL/min. For spectrophotometric studies, the absorbance was measured against methanol at a wavelength of 200-500 nm.

Results

The calibration curves were linear within 2-10 μg/mL with limits of detection of 0.4-0.6 μg/mL of each drug. The derivatization elution, separation, and quantitation were repeatable (n=3) with relative standard deviation (RSD) within 3.9%. The method was applied for the analysis of the drugs from pharmaceutical formulations and the results of the analysis agreed with labeled values with RSDs within 0.5-3.9%. The results were also confirmed by standard addition method. The percent recovery was calculated with spiked deproteinized human blood serum and urine samples and % recovery of the drugs was obtained within 96-98% with RSDs within 3.1%.

Conclusion

The validated method proved its ability for the assay of NSAIDs in bulk and dosage form in a short analysis time. The method was also useful for the analysis of biological samples.

Amine-functionalized magnetic activated carbon as an adsorbent for preconcentration and determination of acidic drugs in environmental water samples using HPLC-DAD

In the present study, a convenient and highly effective method was developed for the quantification of acidic drugs in wastewater and river water samples. Ultrasonic-assisted magnetic solid phase extraction employing magnetic waste tyre-based activated carbon nanocomposite functionalized with [3-(2-aminoethylamino)propyl]trimethoxysilane as a cost-effective and efficient adsorbent was used for the extraction and preconcentration of acidic drugs (naproxen [NAP], ketoprofen (KET) and diclofenac [DIC]). The quantification of target analytes was achieved by high‐performance liquid chromatography with diode array detector. Under optimum conditions, the detection limit, quantification limit and relative standard deviation obtained for the analytes of interest ranged from 0.38 to 0.76, 1.26 to 2.54 µg L−1 and 2.02 to 4.06%, respectively. The applicability of the developed method was assessed by the spike recovery tests and the relative recoveries proved that the method is reliable for the determination of acidic drugs in wastewater. Thereafter, the method was applied successfully for the determination of NAP, KET and DIC in river water, influent and effluent wastewater.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.

Amine functionalized egg albumin hydrogel with enhanced adsorption potential for diclofenac sodium in water

The removal of diclofenac sodium (DFS) from wastewater has attracted increasing attention because it is within the extensively prescribed nonsteroidal anti-inflammatory drugs and pose ecotoxicity. Therefore, fabrication of versatile adsorbents of low-cost, higher-effectiveness and excellent recyclability is significant for the treatment of DFS contaminated wastewater. This work reports a promising biobased egg albumin (ALB) hydrogel functionalized with a large density of adsorptive amine sites via polyethyleneimine (PEI). The composite ALB/PEI hydrogel demonstrated an excellent DFS removal capacity, i.e. 232.5 mg/g, in an optimum experimental condition (pH∼6; contact time∼180 min; adsorbent dosage∼0.5 g/L) which revealed to be considerably higher or competitive than many reported adsorbents. The adsorption isotherms better accorded with the Langmuir model and the kinetics with the pseudo second-order model, indicating the mono-layer chemisorption process. Besides, the regeneration steps up to four sequential adsorption/desorption cycles demonstrated an excellent reusability. The Fourier-transform infrared spectrometry (FTIR), and X-ray photoelectron spectroscopy (XPS) results implied that the adsorption process followed via the electrostatic interactions, hydrogen bonding, and π-π stacking between the functionality of hydrogel and aromatic rings of DFS. Considering the low-cost, and an excellent DFS removal capacity, the natural composite ALB/PEI hydrogel could be a promising adsorbent for the treatment of DFS contaminated wastewater.

Facile preparation of magnetic covalent organic framework-metal organic framework composite materials as effective adsorbents for the extraction and determination of sedatives by high-performance liquid chromatography/tandem mass spectrometry in meat samples

RATIONALE

Sedatives, which are prone to cause residues in animals, have been abused in modern animal husbandry. Long-term consumption of contaminated meat products would be unfavorable to the human nervous system. Taking into account public health and food safety, it was essential to develop an effective method for the enrichment and detection of sedatives in meat.

METHODS

Fe₃ O₄ @TbBd@ZIF-8 composites were synthesized by using Fe₃ O₄ nanoparticles as a magnetic core and 1,3,5-triformylbenzene (Tb) and benzidine (Bd) as two building blocks to form Fe₃ O₄ @TbBd. Furthermore, the zeolitic imidazolate framework-8 (ZIF-8) was modified on the surface of the Fe₃ O₄ @TbBd. In addition, Fe₃ O₄ @TbBd@ZIF-8 was used as a magnetic solid-phase extraction (MSPE) adsorbent of typical animal sedatives in pork samples. Mass spectrometry analysis was conducted by electrospray ionization triple-quadrupole mass spectrometry in positive-ion multiple reaction monitoring mode.

RESULTS

By combining the optimized MSPE approach with high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS), an accurate and sensitive method for the determination of sedatives was developed. The method exhibited good linearity in the range of 0.03-70 μg/kg with the correlation coefficient (R² ) ranging from 0.9982 to 0.9999, high sensitivity with limits of detection (LODs) ranging from 0.04 to 0.2 μg/kg, and high precision with relative standard deviation (RSD) less than 5.5%. The adsorption behaviors of Fe₃ O₄ @TbBd@ZIF-8 towards sedatives were more suitably described by a pseudo-second-order kinetic and Freundlich isotherm model.

CONCLUSIONS

The proposed MSPE-HPLC/MS/MS method was successfully applied to the determination of sedatives in real samples and showed excellent applicability. Several sedatives were detected in the selected meat samples. The developed method was shown to be facile, sensitive and accurate for sedative detection and also showed great prospects for determination of sedatives from other complex samples.

Polyamine-Modified Magnetic Graphene Oxide Nanocomposites and HPLC-MS/MS Allow the Determination of Two Indolic Derivatives in Strong-Aroma Types of Base Baijiu

Simultaneous detection of 3-indoleacetic acid (IAA) and 3-indolepropionic acid (IPA) in strong-aroma types of base Baijiu (base SAB) is crucial for elucidating the metabolic pathway of 3-methylindole during the base SAB brewing. Herein, a novel magnetic poly(allylamine)-modified graphene oxide (GO@PAA@Fe₃O₄) was synthesized as extraction sorbent, followed by high performance liquid chromatography mass spectrometry HPLC-MS/MS. As a surface modifier of GO, the introduction of PAA and Fe₃O₄ provided more adsorption sites for IAA and IPA, mainly through the generation of H-bonding sites. Moreover, modified by an activation step, the capacity of the activated GO@PAA@Fe₃O₄ for the adsorption of IAA and IPA was 2.1-3.4 times higher than that of unactivated material. The adsorptions of IAA and IPA on GO@PAA@Fe₃O₄ were fitted to the pseudo-second-order kinetic model and Langmuir isotherm, respectively. Under the optimal conditions, IAA and IPA were determined in 16-base SAB for the first time, and their concentrations ranged from 0.6 to 11.3 and 0.7 to 18.7 μg/L, respectively.

Magnetic N-doped 3D graphene-like framework carbon for extraction of cephalexin monohydrate and ceftiofur hydrochloride

Magnetic N-doped 3D graphene-like framework carbon (Fe₃O₄@N-3DFC) was prepared via direct pyrolysis of sodium citrate and further hydrothermal reaction, and employed in the extraction of two cephalosporin antibiotics including cephalexin monohydrate and ceftiofur hydrochloride. The scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectroscopy and X-ray diffraction were employed to confirm the successful synthesis of 3DFC-based adsorbents (3DFCs) including 3DFC, Fe₃O₄@3DFC and Fe₃O₄@N-3DFC. Fe₃O₄@N-3DFC sorbent with 3D graphene-like honeycomb architecture combined magnetic and N doping shows the attractive features including graphene carbon sheets, hierarchical porous structure, good wettability and higher surface affinity for cephalosporin antibiotics. Furthermore, the comparison of extraction efficiency with raw 3DFC and Fe₃O₄@3DFC sorbent also confirmed the superiority of Fe₃O₄@N-3DFC sorbent. Under optimized conditions, good linearity lines were obtained with the determination coefficients from 0.9953 to 0.9995. The limit of detections were in the range of 0.20-0.45 μg L^-1 and 0.03-0.10 μg L^-1 for cephalexin and ceftiofur, respectively. The spiked extraction recoveries were between 81.59% and 98.35% with the relative standard deviation values less than 6.98%. Combined with high performance liquid chromatography, Fe₃O₄@N-3DFC based magnetic solid-phase extraction was successfully applied in river water and zebrafish samples analysis.

Mixed Matrix Membrane Tip Extraction Coupled with UPLC–MS/MS for the Monitoring of Nonsteroidal Anti-Inflammatory Drugs in Water Samples

An ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method, in combination with a mixed matrix membrane microextraction method for the quantification of nonsteroidal anti-inflammatory drugs (NSAIDs) in environmental water samples, is reported. The extraction device was prepared by casting well-dispersed polymeric bonded octadecyl (C18) particles in a cellulose triacetate matrix solution onto commercially available 200 μL micropipette tips. The membrane formed contains 25% of the adsorbent loading amount and was firmly attached to the inner wall of the membrane tip. The dynamic extraction was performed by withdrawing and dispensing the sample solution through the tip device for effective analyte adsorption, followed by the analyte desorption process into 40 μL of methanol and acetonitrile (1:1) prior to UPLC–MS/MS analysis. NSAIDs—namely diclofenac, ibuprofen, indoprofen, naproxen and sulindac—were chosen as targeted analytes. Several extraction parameters were comprehensively optimized, including sample pH value, ionic strength, dynamic extraction cycle, desorption solvent and desorption time. The optimized conditions demonstrated a linear range from 0.25 to 500 ng L−1, with correlation coefficients (r2) from 0.9988 to 0.9992 and detection limits ranging from 0.08 to 0.40 ng L−1. The recoveries of the spiked water samples were between 92% and 99% and exhibited excellent precision relative to standard deviations (RSDs ≤ 4.9%), and enrichment factors (EFs) were at 201–249 for the developed approach.

Magnetic Solid-Phase Extraction of Organic Compounds Based on Graphene Oxide Nanocomposites

Graphene oxide (GO) is a chemical compound with a form similar to graphene that consists of one-atom-thick two-dimensional layers of sp²-bonded carbon. Graphene oxide exhibits high hydrophilicity and dispersibility. Thus, it is difficult to be separated from aqueous solutions. Therefore, functionalization with magnetic nanoparticles is performed in order to prepare a magnetic GO nanocomposite that combines the sufficient adsorption capacity of graphene oxide and the convenience of magnetic separation. Moreover, the magnetic material can be further functionalized with different groups to prevent aggregation and extends its potential application. Until today, a plethora of magnetic GO hybrid materials have been synthesized and successfully employed for the magnetic solid-phase extraction of organic compounds from environmental, agricultural, biological, and food samples. The developed GO nanocomposites exhibit satisfactory stability in aqueous solutions, as well as sufficient surface area. Thus, they are considered as an alternative to conventional sorbents by enriching the analytical toolbox for the analysis of trace organic compounds.

Fabrication of a functionalized magnetic covalent organic framework composite as an efficient adsorbent for sulfonamide extraction from food samples

A carboxyl group functionalized magnetic covalent organic framework as an adsorbent to extract sulfonamides from meat samples was proposed.

Extraction of nucleobases, nucleosides and nucleotides by employing a magnetized graphene oxide functionalized with hydrophilic phytic acid and titanium(IV) ions

A magnetite@graphene oxide nanocomposite was first coated with polyethylenimine and then modified with phytic acid and titanium(IV) ions. The high loading with Ti(IV) and the good hydrophilicity of PEI and PA result in a material that can be applied to the efficient extraction of highly polar nucleobases, nucleosides and nucleotides. The physicochemical properties of the composite were investigated by scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, water contact angle measurements, thermogravimetric analysis, and vibrating sample magnetometry. A series of parameters that affect extraction and elution under the conditions of immobilized metal affinity chromatography (IMAC) and hydrophilic interaction liquid chromatography (HILIC) were examined. The analytes were eluted from the nanocomposites using 10 mM trisodium phosphate as the elution solution in the IMAC mode, and 50% methanol-water as elution solution in the HILIC mode. Figures of merit include (a) an intra-day precision of 0.1-1.0% in the IMAC mode; (b) an intra-day precision of 0.4%-0.8% in the HILIC mode; (c) detection limits between 1.8-2.8 ng mL^-1 in the IMAC mode; and (d) detection limits of 4.0-10.5 ng mL^-1 in the HILIC mode. The method was applied to the extraction of the nucleotides cytidine-5'-monophosphate (CMP), uridine-5'-monophosphate (UMP), guanosine-5'-monophosphate (GMP), and adenosine-5'-monophosphate (AMP), and the nucleobases and nucleosides hypoxanthine, adenosine, cytosine, inosine and cytidine from Cordyceps sinensis, Lentinus edodes and plasma samples. Graphical abstract Schematic presentation of the workflow for the extraction of nucleobases, nucleosides and nucleotides using phytic acid-Ti(IV) functionalized magnetite@graphene oxide nanocomposites under two distinct modes.

Novel alginate/polyethyleneimine hydrogel adsorbent for cascaded removal and utilization of Cu2+ and Pb2+ ions

Heavy metal ion pollution leads to severe health risk to human beings. Herein, a natural and highly efficient sodium alginate (ALG)/polyethyleneimine (PEI) composite hydrogel was designed and fabricated for the removal of heavy metal ions from wastewater. The adsorption of heavy metal ions on the ALG based, 3D composite hydrogel were thoroughly investigated in this study. Furthermore, the in situ reduced metal nanoparticle-loaded ALG/PEI composite hydrogel provided us a sustainable utilization route of the heavy metal ion with a promising adsorption-catalysis ability. In general, this research will present an effective and practical paradigm for the cascaded treatment and recycling of heavy metal ions in wastewater.