A new portable switchable hydrophilicity microextraction method for determination of vanadium in microsampling micropipette tip syringe system couple with ETAAS

Portable one-step effervescence tablet-based microextraction combined with smartphone digital image colorimetry: Toward field and rapid detection of trace nickel ion

In this study, the one-step switchable hydrophilic solvent (SHS)-based effervescence tablet microextraction (ETME) was coupled with smartphone digital image colorimetry (SDIC) for the field detection of nickel ion (Ni2+) for the first time. Both extractant and CO2 were generated in situ when the novel SHS-based effervescence tablet was placed in the sample solution. The complexant 1-(2-pyridinylazo)-2-naphthaleno (PAN) dissolved from the effervescence tablet to form a stable complex with Ni2+, and the extractant was uniformly dispersed in the sample solution under the action of CO2 and fully in contact with Ni-PAN, which enabled efficient extraction of Ni2+. The color changes of the extraction phase were captured by smartphone, then a quantitative relationship between the concentrations of Ni2+ and color intensity of images captured using a smartphone was established by customized applet WASDIC, which realized quantitative analysis of Ni2+ in different samples. Under optimal conditions, the enhancement factor (EF) of the proposed method was 65.1, the limit of detection (LOD) and limit of quantification (LOQ) were 1.69 and 5.64 μg L-1, respectively. The developed method was successfully applied to the detection of trace Ni2+ in the environmental samples and natural medicines. And the applicability of the method for use in field analysis was validated.

Ultrasound assisted dispersive solid phase microextraction using polystyrene-polyoleic acid graft copolymer for determination of Sb(III) in various bottled beverages by HGAAS

A new polyoleic acid-polystyrene (PoleS) block/graft copolymer was synthesized and applied as adsorbent for ultrasound assisted dispersive solid phase microextraction (UA-DSPME) of Sb(III) in different bottled beverages and analysis using hydride generation atomic absorption spectrometry (HGAAS). Adsorption capacity of the PoleS was 150 mg g^-1. Several sample preparation parameters such as sorbent amount, solvent type, pH, sample volume and shaking time were optimized (based on central composite design (CCD) approach) and evaluated in respect to the recovery of Sb(III). The method revealed a high tolerance limit of matrix ions presence. Under optimized conditions, linearity range, the limit of detection, the limit of quantitation, extraction recovery, enhancement factor, preconcentration factor were 5-800 ng L^-1, 1.5 ng L^-1, 5.0 ng L^-1, 96%, 82, 90, respectively. Accuracy of the UA-DSPME method was confirmed based on different certified reference materials and standard addition method. Factorial design was utilized to estimate the influences of variables of recovery of Sb(III).

Adsorptive Stripping Voltammetry for Determination of Vanadium: A Review

The main purpose of this review is to present methods of adsorptive stripping voltammetry that can be used to determine trace amounts of VO₂⁽⁺⁾ in various types of samples. The detection limits achieved using different working electrodes are presented. The factors influencing the obtained signal, including the selection of the complexing agent and the selection of the working electrode, are shown. For some methods, in order to increase the range of applied concentrations in which vanadium can be detected, a catalytic effect is introduced to adsorptive stripping voltammetry. The influence of the foreign ions and organic matter contained in natural samples on the vanadium signal is analyzed. This paper presents methods of elimination associated with the presence of surfactants in the samples. The methods of adsorptive stripping voltammetry for the simultaneous determination of vanadium with other metal ions are also characterized below. Finally, the practical use of the developed procedures, mainly for the analysis of food and environmental samples, is summarized in a tabular version.

Application of Recently used Green Solvents in Sample Preparation Techniques: A Comprehensive Review of Existing Trends, Challenges, and Future Opportunities

Green solvents (GSs) has gained significant attention in recent years due to their potential as safer and more sustainable alternatives to traditional organic solvents. Solvents are used in a wide range of applications, from industrial processes to everyday products. Solvent emissions and losses can have a significant impact on the environment and human health, which is why many initiatives are being undertaken to get rid of or switch to eco-friendly alternatives. A key area of green chemistry that led to the concept of "green" solvents is the development of alternative solvents that are less toxic and more environmentally friendly than traditional organic solvents. The advantages of using green solvents over conventional ones are their environmental friendliness, biocompatibility, biodegradability, and simplicity of preparation. Different sample preparation techniques have successfully utilized green solvents to offer a sustainable separation media for the extraction of a variety of inorganic and organic compounds which are crucial for research in environmental samples. Recent developments in green analytical chemistry (GAC) have focused on how to prepare and use samples using environmentally sustainable solvents. The current study covers the advance and currently used green solvents with an emphasis on environmentally friendly sample preparation methods. This review aims to briefly summarize the current state of knowledge about the use of green solvents particularly ionic liquids, deep eutectic solvents and switchable solvents (SSs) with the perspective of GAC in sample preparation methods.

Vanadium: A Review of Different Extraction Methods to Evaluate Bioavailability and Speciation

The excessive input of heavy metals such as vanadium (V) into the environment has been one of the consequences of global industrial development. Excessive exposure to V can pose a potential threat to ecological safety and human health. Due to the heterogeneous composition and reactivity of the various elements in soils and sediments, quantitative analysis of the chemical speciation of V in different environmental samples is very complicated. The analysis of V chemical speciation can further reveal the bioavailability of V and accurately quantify its ecotoxicity. This is essential for assessing for exposure and for controlling ecological risks of V. Although the current investigation technologies for the chemical speciation of V have grown rapidly, the lack of comprehensive comparisons and systematic analyses of these types of technologies impedes a more comprehensive understanding of ecosystem safety and human health risks. In this review, we studied the chemical and physical extraction methods for V from multiple perspectives, such as technological, principle-based, and efficiency-based, and their application to the evaluation of V bioavailability. By sorting out the advantages and disadvantages of the current technologies, the future demand for the in situ detection of trace heavy metals such as V can be met and the accuracy of heavy metal bioavailability prediction can be improved, which will be conducive to development in the fields of environmental protection policy and risk management.

Theoretical Thermal-Mechanical Modelling and Experimental Validation of a Three-Dimensional (3D) Electrothermal Microgripper with Three Fingers

This paper presents the theoretical thermal-mechanical modeling and parameter analyses of a novel three-dimensional (3D) electrothermal microgripper with three fingers. Each finger of the microgripper is composed of a bi-directional Z-shaped electrothermal actuator and a 3D U-shaped electrothermal actuator. The bi-directional Z-shaped electrothermal actuator provides the rectilinear motion in two directions. The novel 3D U-shaped electrothermal actuator offers motion with two degrees of freedom (DOFs) in the plane perpendicular to the movement of the Z-shaped actuator. As a result, each finger possesses 3D mobilities with three DOFs. Each beam of the actuators is heated externally with polyimide films. In this work, the static theoretical thermal-mechanical model of the 3D U-shaped electrothermal actuator is established. Finite-element analyses and experimental tests are conducted to verify and validate the model. With this model, parameter analyses are carried out to provide insight and guidance on further improving the 3D U-shaped actuator. Furthermore, a group of micro-manipulation experiments are conducted to demonstrate the flexibility and versality of the 3D microgripper on manipulate different types of small/micro-objects.

Thiol modified bimodal mesoporous silica nanoparticles for removal and determination toxic vanadium from air and human biological samples in petrochemical workers

Investigation of exposure to toxic vanadium (V) in petrochemical workers is very important for human health, and it must be removed and determined in workplace air and human biological samples. In this research, the enriched adsorbent based on the thiol modified bimodal mesoporous silica nanoparticle (HS-UVM₇) was used for the extraction vanadium in human blood by the dispersive sonication ionic liquid micro solid phase extraction (DS-IL-μ-SPE) at pH of 4.5. In addition, the vanadium (V) was removed from the industrial workplace air based on HS-UVM₇ adsorbent by the liquid-solid phase-gas removal (LSP-GR). In the static and dynamic system, the vanadium (V) was removed from artificial air with HS-UVM₇ and compared with the polyvinyl chloride membrane (PCM, sorbent in 7300 NIOSH). The LSP-GR procedure based on HS-UVM₇ had more recovery and adsorption capacity as compared to PCM. The adsorption capacity of HS-UVM₇ and UVM₇ adsorbents were obtained 144.1 mg g^-1 and 23.3 mg g^-1, respectively. In addition, the main parameters effected on extraction vanadium in blood samples and removal from air were studied and optimized by ET-AAS. The LOD, RSD%, linear range (LR) and enrichment factor (EF) was achieved 0.03 μg L^-1, 3.1, 0.1-4.5 μg L^-1 and 48.7, respectively for extraction of vanadium in 10 mL of blood samples by the DS-IL-MSPE procedure. The validation of the methodology was confirmed by standard addition to gas phase and using certified reference materials (CRM, NIST) or ICP-MS in human blood samples.

A novel direct-immersion single-drop microextraction combined with digital colorimetry applied to the determination of vanadium in water

In this study, a method based on direct-immersion single-drop microextraction was developed for the determination of vanadium in water. The detection system uses digital images obtained directly from the solvent drop after the sorption of V(V). The extraction solvent used was the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]). The images were obtained directly from the solvent drop, with the aid of a camera. The digital images were stored, and the RGB (red, green, and blue) data were obtained. The data collected by the red channel were used to construct the analytical curve since it showed higher sensitivity compared with green and blue channels. Under optimized conditions, the method presented an enrichment factor of 50 and a limit of detection of 0.6 μg L^-1 for 3.5 mL sample volume. The limit of quantification and the relative standard deviation (50.0 μg L^-1) obtained were 1.8 μg L^-1 and 4.8%, respectively. Certified reference material (Plankton) was used to assess the accuracy of the method. The simple, fast, efficient, and low-cost procedure was successfully applied to the determination of V(V) in water samples. The proposed method is also following the principles of green chemistry since it uses minimal volumes of samples, reagents, and solvents and yields a small amount of waste.

Sustainable green solvents for microextraction techniques: Recent developments and applications

The development and application of alternative green solvents in analytical techniques consist of trends in sample preparation, since this subject represents an important step toward sustainability in experimental procedures. This review is focused on the main theoretical aspects related to deep eutectic solvents (DES), switchable hydrophilicity solvents (SHS) and supramolecular solvents (SUPRAS). Recent applications are highlighted, particularly for the extraction of different analytes from environmental, biological and food matrices. Moreover, novel configurations are emphasized, aiming for efficient, automated and high-throughput procedures. This review also provides some critical points regarding the use of these solvents and their green aspects.

Dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for HPLC determination of three strobilurin fungicides in cereals

In this paper, a dispersive liquid-liquid microextraction method based on the solidification of floating organic droplets, combined with high-performance liquid chromatography (DLLME-SFOD-HPLC), was developed for the detection of strobilurin fungicides (azoxystrobin, pyraclostrobin, and trifloxystrobin) in cereals. Natural fatty acids were used as an extractant and have low toxicity, density, and freezing point. The extractant nonanoic acid was evenly dispersed as droplets in sample solution and was then solidified in the upper layer of sample solution after centrifugation and ice bath, which improved the extraction and collection efficiency. The dispersive liquid-liquid microextraction procedure was optimised by univariate analysis and the Box-Behnken response surface methodology. Optimum conditions were as follows: the volume of nonanoic acid was 82 μL, the volume of acetonitrile was 620 μL, and the amount of salt was 256 mg. Under optimised conditions, the method had good linearity with a correlation coefficient higher than 0.997, and the limit of detection was 2.57-4.87 μg kg^-1. The recoveries of azoxystrobin, pyraclostrobin, and trifloxystrobin in rice, corn, and wheat were 82.0%-93.2%, and the relative standard deviations were 1.6%-7.4%. Therefore, the method was successfully applied to detect target fungicides in cereals.

A ligand-anchored optical composite material for efficient vanadium(ii) adsorption and detection in wastewater

A ligand-anchored composite material was prepared for vanadium (V(ii)) ion capturing. The pH was found to be a key factor in both detection and removal operations. The composite material exhibited the high adsorption capacity of 492.61 mg g⁻¹.