N-doped carbon dots/H2O2 chemiluminescence system for selective detection of Fe2+ ion in environmental samples

Hydrogen peroxide enhanced glow-type chemiluminescence of hydrazine hydrate modified carbon quantum dots-potassium persulfate system

Most known chemiluminescence (CL) systems are flash-type that generate weak luminescence and decline quickly after dozens of seconds, while the glow-type CL systems have stable emission for an extended period to achieve accurate quantitation. In this work, a long-term CL system based on hydrazine-hydrate (N2H4·H2O) modified carbon quantum dots (N-CQDs) as a luminescent probe, with K2S2O8 and H2O2 as co-reactants, was proposed. The CL emission enhanced by H2O2 increased 18-fold more than that of N-CQDs and K2S2O8 direct reaction, and decayed by 5% of the maximum intensity over 700 s. In the reaction system, K2S2O8 and H2O2 co-reactants can promote each other to continuously generate corresponding radicals (•OH, O2•-, 1O2), which in turn trigger the CL emission of N-CQDs. This phenomenon was identified as the primary cause for the production of persistent CL. In addition, a stable and selective CL sensor based on the N-CQDs-K2S2O8-H2O2 CL enhancing system was developed for ascorbic acid quantitation in the linear range from 0.1 to 10.0 mM with a detection limit of 0.036 mM. The method has been applied to the analysis of tablet samples and holds potential in pharmaceutical analysis field.

Boosting Photon Emission from the Chemiluminescence of Luminol Based on Host-Guest Recognition for the Determination of Dopamine

Modulating the photon emission of the luminophore for boosting chemiluminescence (CL) response is very crucial for the construction of highly sensitive sensors via the introduction of functionalized materials. Herein, the integration of the emitter and coreactant accelerator into one entity is realized by simply assembling cucurbit[7]uril (CB[7]) on the surface of gold nanoparticles (AuNPs) through simple assembly via a Au-O bond. The loaded CB[7] on the AuNPs improves their catalytic capacity for the generation of hydroxyl radicals(•OH). Moreover, the host-guest recognition interaction between luminol and CB[7] enables the capture of luminol on AuNPs efficiently. Also, the intramolecular electron-transfer reaction between the luminol and •OH enables the CL response more effectively in the entity, which greatly boosts photon emission ca 100 folds compared with the individual luminol/H2O2. The host-guest recognition between luminol and CB[7] is revealed by Fourier transform infrared spectroscopy, electrochemical, and thermogravimetric characterization. Moreover, the proposed CL system is successfully used for the sensitive and selective determination of dopamine (DA) based on a synergistic quenching mechanism including the competition quenching and radical-scavenging effect from DA. The present amplified strategy by integrating recognized and amplified elements within one entity simplifies the sensing process and holds great potential for sensitive analysis based on the self-enhanced strategies.

Ligand influence in electrocatalytic properties of Cu(II) triazole complexes for hydrogen peroxide detection in aqueous media

In this work, electrocatalytic changes of Cu(II) triazole complexes (Cu(L)₂) resulting from inductive effects were evaluated to fabricate a sensor for hydrogen peroxide (H₂O₂) determination. Three copper(II) complexes with electronically differentiated ligands were synthesized by slow diffusion method and characterized by X-ray crystallography, Fourier transformed infrared (FTIR), UV-Vis, scanning electron microscopy (SEM) and voltammetry cyclic (CV). Cu(LOMe)2/GC, Cu(LBr)2/GC and Cu(LNO2)2/GC sensors were then prepared. Under optimal conditions (pH = 11), the optimal sensor presented a response at -0.5 V, good linear range of 1-32 μM, reproducibility (1.7%), repeatability (1.2%), LOD of 0.0246 μM (S/N = 5), LOQ of 0.0747 μM (S/N = 5) and selectivity. Additionally, Cu(LNO2)2/GC sensor has been successfully applied in commercial substances, such as mouthwash, milk and tea.

Synthesis of Bimetallic Ni-Co Phosphide Nanosheets for Electrochemical Non-Enzymatic H2O2 Sensing

NiCoP nanosheets (NSs) were successfully synthesized using the hydrothermal and high-temperature phosphorization process. The obtained NiCoP NSs were immobilized on a glassy carbon electrode (GCE) and used to construct a novel sensing platform for electrochemical non-enzymatic H₂O₂ sensing. Physicochemical characteristics of NiCoP NSs were obtained by field-emission scanning electron microscopy (FESEM), field-emission transmission electron microscope (FETEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). In addition, the electrochemical properties of NiCoP NSs were obtained by cyclic voltammetry (CV) and chronoamperometry (CA) towards the non-enzymatic detection of H₂O₂. FESEM and FETEM images provided a morphological insight (the unique nanosheets morphology of NiCoP) that could expose more active sites to promote mass/charge transport at the electrode/electrolyte interface. XRD and XPS results also confirmed the crystalline nature of the NiCoP nanosheets and the coexistence of multiple transitional metal oxidation states in NiCoP nanosheets. These unique physicochemical characteristics had a degree of contribution to ensuring enhancement in the electrochemical behavior. As a result, the synthesized NiCoP NSs composed of intercalated nanosheets, as well as the synergistic interaction between bimetallic Ni/Co and P atoms exhibited excellent electrocatalytical activity towards H₂O₂ electroreduction at neutral medium. As the results showed, the electrochemical sensing based on NiCoP NSs displayed a linear range of 0.05~4 mM, a sensitivity of 225.7 μA mM^-1 cm^-2, a limit of detection (LOD) of 1.190 μM, and good selectivity. It was concluded that NiCoP NSs-based electrochemical sensing might open new opportunities for future construction of H₂O₂ sensing platforms.

2D Co3O4 modified by IrO2 nanozyme for convenient detection of aqueous Fe2+ and intercellular H2O2

A portable sensor for visual monitoring of Fe²⁺ and H₂O₂, two-dimensional Co₃O₄ modified by nano-IrO₂ (IrO₂@2D Co₃O₄) was prepared in this work, for the first time, with the help of microwave radiation at 140 °C, which was further stabilized onto common test strips. The present IrO₂@2D Co₃O₄ possessed superior dual-function enzyme-like activity with low toxicity and excellent biocompatibility. Especially, trace Fe²⁺ and H₂O₂ could exclusively alter their enzyme-like catalytic activity with discriminating hyperchromic or hypochromic effect, i.e., from blue to colorless or to dark blue for both IrO₂@2D Co₃O₄ dispersion and its functionalized test strips. The linear regression equations were A₆₅₂ = 0.5940 - 0.00041 c_Fe²⁺ (10^-8 M, R² = 0.9927) for Fe²⁺ and ∆A₆₅₂ = 0.0023 c_H2O2 + 0.00025 (10^-7 M, R² = 0.9982) for H₂O₂, respectively. When applied to visual monitoring of aqueous Fe²⁺ and intercellular H₂O₂, the recoveries were 101.2 ~ 102.5% and 95.8 ~ 103.7% with detection limits of 1.25 × 10^-8 mol/L and 1.02 × 10^-7 mol/L, respectively, far below the permitted values in drinking water set by the World Health Organization. The mechanisms for the enhancing enzyme-mimetic activity of IrO₂@2D Co₃O₄ and its selective responses to Fe²⁺ and H₂O₂ were investigated in detail.

Sulfur quantum dots as a novel platform to design a sensitive chemiluminescence probe and its application for Pb2+ detection

The monitoring of Pb as a hazardous heavy metal element for the environment and human health is of high importance. In this study, a simple and sensitive chemiluminescence (CL) probe based on sulfur quantum dots (SQDs) was designed for the determination of Pb²⁺ . To the best of our knowledge, this is the first report about the analytical application of the CL method based on SQDs. For this purpose, SQDs were synthesized by a simple hydrothermal method and characterized by TEM, FT-IR, XPS and X-ray diffraction. Then, the direct chemiluminescence (CL) of SQDs elicited by common oxidants was investigated. The highest CL intensity was observed for the SQDs-KMnO₄ reaction, and its CL mechanism was studied. We indicated that the CL intensity of introduced system can be diminished as a result of interaction between Pb²⁺ and SQDs, and exploited this fact for designing a CL-based probe for the determination of Pb²⁺ . The CL intensity of SQDs-KMnO₄ reaction was linearly quenched by Pb²⁺ at the range of 50 to 2000 nM with a limit of detection as 16 nM (S/N=3). The probe was employed for the determination of Pb²⁺ in different water samples and the recovery results (95.2 to 102.8%) indicated the good analytical performance of the developed method.

A Review on Carbon Quantum Dots: Synthesis, Photoluminescence Mechanisms and Applications

Carbon quantum dots (CQDs), having outstanding biocompatibility, attractive catalytic performance, excellent optical properties, and valuable environment friendliness, are emerging as a new paradigm to design luminescent devices and show great potential in application fields such as biomedical sensors, optical and photonic devices. And CQDs are known as one of the most promising carbon based nanomaterials in the 21st century. Therefore, it has attracted a lot of attention since it was first discovered in 2004. In this review, we explain the accepted photoluminescence mechanism of CQDs, including fluorescence and phosphorescence. There are two main types of synthesis strategies: top-down approach and bottom-up approach. At the same time, the main application fields, including ion detection, anti-counterfeiting, biological imaging, food safety, sensors, lubrication additives, are reviewed. Finally, the existing bottlenecks, pending problems and prospects for the future of CQDs are discussed.

Ratiometric fluorescence nanoprobe based on carbon dots and terephthalic acid for determining Fe2+ in environmental samples

A ratiometric fluorescent nanoprobe using carbon dots (CDs) and involving oxidation of terephthalic acid (TPA) induced by hydroxyl radicals (·OH) was developed for sensitively and selectively determining Fe²⁺ ions. When Fe²⁺ ions are added to the TPA@CDs/H₂O₂ system, ·OH produced through the Fenton reaction oxidizes the non-fluorescent TPA to give 2-hydroxyl terephthalic acid, which fluoresces at 423 nm when excited at 286 nm. The ·OH and Fe³⁺ produced quench CD fluorescence at 326 nm. The 2-hydroxyl terephthalic acid to CD fluorescence intensity ratio linearly increased as the Fe²⁺ concentration increased in the range 0.5-50 μM, and the detection limit was 0.25 μM. The new assay is very selective because it involves dual-emission reverse change ratio fluorescence sensing, which can exclude matrix effects. The new nanoprobe was used to determine Fe²⁺ concentrations in real water samples, and the recoveries were found to be acceptable. Schematic of the ratiometric fluorometric method for determining Fe²⁺ based on CDs and TPA.

Sensor Heavy Metal from Natural Resources for a Green Environment: A Review Relation Between Synthesis Method and Luminescence Properties of Carbon Dots

Carbon dots are 10-nm nanomaterial classes as excellent candidates in various applications: physics, biology, chemistry, and food science due to high stable biocompatibility and high surface expansive. Carbon dots (CDs) produced from natural materials have received wide attention due to their unique benefits, easy availabilities, sufficient costs, and harmless to the ecosystem. The various properties of CDs can be obtained from various synthesis methods: hydrothermal, microwave-assisted, and pyrolysis. The CDs have shown enormous potential in metal particle detection, colorimetric sensors, electrochemical sensors, and pesticide sensor. This review provides systematic information on a synthesis method based on natural resources and the application to the environmental sensors for supporting the clean environment. We hopefully this review, useful as a reference source in providing the guidance or roadmap of new researchers to develop new strategy in increasing luminescence properties CDs for multi detection of heavy metal in the environment.

Preparation of Sulfur-doped Carbon for Supercapacitor Applications: A Review

Electrochemical capacitors, also known as supercapacitors (SCs), have lately played an important role in energy storage and conversion systems due to their specific characteristics such as high strength, durability, and environmental friendliness. A wide range of materials is used as electrodes for SC applications because the electrochemical efficiency is primarily determined by the electrode materials used. Carbonaceous materials with unique surface, chemical, electrochemical, and electronic characteristics have become attractive for energy storage research, but they cannot meet the rising need for high specific energy and specific power. Besides, heteroatom-doped carbon materials have shown pseudocapacitance characteristics and improved specific energy, specific power, and conductivity. This makes them more adaptable in SC application. Among different heteroatom doping of carbon, S-doped carbon has gained considerable attention in SC applications due to its unpaired electrons and easily polarizable nature. S-doped carbon materials-based SCs have demonstrated enhanced surface wettability, improved conductivity, and induced pseudocapacitance effect, thereby delivering improved specific energy and specific power. Many reports on S-doped carbon for SC applications have been published, but there is no specific Review on the preparation of S-doped carbon for SC applications. This Review focuses on recent developments in the field of SC electrodes made from S-doped carbon materials. Herein, the preparation methods and applications of S-doped carbon for SCs were summarized following a brief discussion of different electrochemical characterization techniques of SCs. Finally, the challenges of S-doped carbon materials and their potential prospects were discussed to give crucial insights into the favorable factors for future innovations of SC electrodes. This Review aims to provide insight for further research on the preparation of S-doped carbon for electrochemical energy storage applications.

A facile green and one-pot synthesis of grape seed-derived carbon quantum dots as a fluorescence probe for Cu(ii) and ascorbic acid

In this study, an on–off–on fluorescence probe for the detection of trace Cu(ii) and ascorbic acid (AA) based on biomass-derived sulfur and nitrogen double heteroatom-doped carbon dots (N,S-CDs) was designed. For the first time, the probe (N,S-CDs) was prepared from grape seeds and thiourea as the precursor. Cu(ii) was added to the carbon point solution, the fluorescence intensity (FL) of N,S-CDs was strongly quenched (switch OFF) and the fluorescence probe turned to “ON” (switch ON) with the addition of AA. Under the optimal conditions, the as-synthesized N,S-CDs had a good detection performance for Cu(ii) and AA assay with the linearity ranges from 150–500 μg mL⁻¹ and 0.1–400 μg mL⁻¹, and the LODs were 0.048 mg L⁻¹ and 0.036 mg L⁻¹, respectively. The as-prepared N,S-CDs exhibited a low cytotoxicity and a good biocompatibility, which show their potential for application in the biological imaging of living cells.

In this study, an on–off–on fluorescence probe for the detection of trace Cu(ii) and ascorbic acid (AA) based on biomass-derived sulfur and nitrogen double heteroatom-doped carbon dots (N,S-CDs) was designed.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.

Synthesis and modification of carbon dots for advanced biosensing application

There has been an explosion of interest in the use of nanomaterials for biosensing applications, and carbonaceous nanomaterials in particular are at the forefront of this explosion. Carbon dots (CDs), a new type of carbon material, have attracted extensive attention due to their fascinating properties, such as small particle size, tunable optical properties, good conductivity, low cytotoxicity, and good biocompatibility. These properties have enabled them to be highly promising candidates for the fabrication of various high-performance biosensors. In this review, we summarize the top-down and bottom-up synthesis routes of CDs, highlight their modification strategies, and discuss their applications in the fields of photoluminescence biosensors, electrochemiluminescence biosensors, chemiluminescence biosensors, electrochemical biosensors and fluorescence biosensors. In addition, the challenges and future prospects of the application of CDs for biosensors are also proposed.

Natural source of carbon dots from part of a plant and its applications: a review

Carbon dots (CDs) are carbon nanoparticles with a size of less than 10 nm, and are synthesized from various sources; they have been of great interest to scientists worldwide due to their unique optical, electrical, and chemical properties. Sources of carbon are inexpensive and can be classified as a renewable natural resources. Many researchers use CDs because of their low toxicity, better water solubility, high biocompatibility, and stable photoluminescence. The simple methods for producing CDs are hydrothermal and use inexpensive equipment, have low energy consumption, simple manipulation, and one-step preparation. Since the discovery of CDs, researchers have used them in various applications such as sensing, bioimaging, drug delivery, and catalysis. In this review, CDs synthesized from natural resources such as samples from herbs, roots, leaves, flowers, and fruit and some applications are described. This review provides a summary of carbon dots that is expected to provide further information for development of new CDs.

A sensitive turn-off-on fluorometric sensor based on S,N co-doped carbon dots for environmental analysis of Hg(II) ion

A simple and sensitive fluorescence turn-off-on sensor was established by means of S,N co-doped carbon dots (S,N-CDs) and Ag nanoparticles (AgNPs) for the determination of Hg²⁺ . For this purpose, blue emissive S,N-CDs were hydrothermally synthesized and characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive X-ray spectroscopy. We observed that the fluorescence intensity of the as-prepared S,N-CDs was impressively quenched by AgNPs. The quenching mechanism was studied and attributed to nanosurface energy transfer and the inner filter effect between S,N-CDs and AgNPs. Furthermore, by adding Hg²⁺ , the fluorescence intensity of S,N-CDs/AgNPs was restored as a result of aggregation of AgNPs in the presence of Hg²⁺ . Based on these facts, S,N-CDs and AgNPs were exploited to design a sensitive turn-off-on sensor for analysis of Hg²⁺ . The recovered fluorescence signal was proportional to the concentration of Hg²⁺ in the range 1.5-2000 nM with a detection limit of 0.51 nM. The established sensor was used with satisfactory results for measurement of Hg²⁺ in environmental water samples.

Carbon Dots: An Emerging Smart Material for Analytical Applications

Carbon dots (CDs) are optically active carbon-based nanomaterials. These nanomaterials can change their light emission properties in response to various external stimuli such as pH, temperature, pressure, and light. The CD's remarkable stimuli-responsive smart material properties have recently stimulated massive research interest for their exploitation to develop various sensor platforms. Herein, an effort has been made to review the major advances made on CDs, focusing mainly on its smart material attributes and linked applications. Since the CD's material properties are largely linked to their synthesis approaches, various synthesis methods, including surface passivation and functionalization of CDs and the mechanisms reported so far in their photophysical properties, are also delineated in this review. Finally, the challenges of using CDs and the scope for their further improvement as an optical signal transducer to expand their application horizon for developing analytical platforms have been discussed.

Distinctive detection of Fe2+ and Fe3+ by biosurfactant capped silver nanoparticles via naked eye colorimetric sensing

Distinctive detection of Fe²⁺ and Fe³⁺via naked eye colorimetic sensing.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

A sensitive “ON–OFF” fluorescent probe based on carbon dots for Fe2+ detection and cell imaging

A sensitive fluorescent probe based on carbon dots has been synthesized by a one-pot hydrothermal method for the rapid detection of intracellular Fe²⁺.

Nitrogen-doped carbon dots as a probe for the detection of Cu2+ and its cellular imaging

Nitrogen-doped carbon dots were synthesized using citric acid monohydrate and glutathione as raw materials. The synthesized nitrogen-doped carbon dots were characterized by multiple analytical techniques, including transmission electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, and fluorescence spectra. The fluorescence intensity of the nitrogen-doped carbon dots gradually quenched with different concentrations of Cu2+ ions. The effect of the pH value, the nitrogen-doped carbon dot concentration, and the reaction time on the fluorescence intensity of the N-CDs-Cu2+ system was investigated, and the experimental conditions were optimized. A rapid and sensitive method for the determination of Cu2+ ions was established that exhibited a good linearity in the concentration range 0.20–200.0 μM with a detection limit of 0.27 nM. Meanwhile, the fluorescence quenching mechanism of the interaction between nitrogen-doped carbon dots and Cu2+ was preliminarily discussed. The method was used to detect trace Cu2+ in tap water and lake water, with recoveries ranging from 98.1% to 102.0%. Furthermore, due to low cytotoxicity and good biocompatibility, nitrogen-doped carbon dots as a probe were also successfully used in bioimaging.

Radical-Triggered Chemiluminescence of Phenanthroline Derivatives: An Insight into Radical-Aromatic Interaction

The hitherto unknown influence of 1,10-phenonthroline (1,10-phen) and its derivatives on the weak chemiluminescence (CL) of periodate-peroxide has been investigated, and a novel method for CL catalysis is described. Herein, we have deconvoluted the variation in CL intensity arising from the addition of various derivatives of 1,10-phen. Interestingly, similar derivatives of 1,10-phen show interesting differences in their reactivity toward CL. Electron-withdrawing substituents on 1,10-phen boosted the CL signals, indicating a negative charge buildup on 1,10-phen in the rate-determining step. The 1,10-phen derivatives having substitution at the C⁵=C⁶ position resulted in no CL signals due to the blockage of the reactive site. Mechanistic investigations are interpreted in terms of free radical (H₂O₂ reaction), followed by the oxygen atom transfer via an electrophilic attack of IO₄ ^- (IO₄ ^- reaction) on 1,10-phen resulting in dioxetane with enhanced CL emission. Additionally, the relationship between electronic structures and photophysical properties was investigated using density functional theory. Our results are expected to open up promising application of 1,10-phen as a molecular catalyst, providing a new strategy for metal-free catalytic CL enhancement reaction. We believe that this would foster in gleaning more detailed information on the nature of these reactions, thereby leading to a deeper understanding of the CL mechanism.