High sensitivity ammonia detection using metal nanoparticles decorated on graphene macroporous frameworks/polyaniline hybrid

Enhanced room temperature ammonia gas sensing based on a multichannel PSS-functionalized graphene/PANI network

Disordered polymerization of polymers widens the polymerization degree distribution, which leads to uncontrollable thickness and significantly weakens their sensing performance. Herein, poly(sodium p-styrenesulfonate)-functionalized reduced graphene oxide (PSS-rGO) with multichannel chain structures coated with thin polyaniline layer (PSS-rGO/PANI) nanocomposites was synthesized via a facile interfacial polymerization route. The morphology and microstructure of the PSS-rGO/PANI nanocomposites were characterized using Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The flexible PSS-rGO/PANI-2 sensor exhibits excellent room temperature NH3 sensing performance, including a higher sensitivity of 362% and a faster response/recovery time of 23/158 s towards 100 ppm NH3 than other PSS-rGO/PANI nanocomposites. In addition, the flexible PSS-rGO/PANI-2 sensor has a low detection limit of 10 ppb, superior selectivity, repeatability, and long-term stability over 75 days. Remarkably, the flexible PSS-rGO/PANI-2 sensor shows excellent humidity resistance (196 ± 3%, 50 ppm) even at a high relative humidity of 80%. The gas sensing mechanism was systematically investigated through high protonation states and strong π-π conjugation of PSS-rGO/PANI. This work provides a convenient method to construct multichannel thin polyaniline layer-coated graphene nanocomposites and promotes their application in flexible wearable electronics.

Ammonium nanochelators in conjunction with arginine-specific enzymes in amperometric biosensors for arginine assay

Amino acid L-arginine (Arg), usually presented in food products and biological liquids, can serve both as a useful indicator of food quality and an important biomarker in medicine. The biosensors based on Arg-selective enzymes are the most promising devices for Arg assay. In this research, three types of amperometric biosensors have been fabricated. They exploit arginine oxidase (ArgO), recombinant arginase I (ARG)/urease, and arginine deiminase (ADI) coupled with the ammonium-chelating redox-active nanoparticles. Cadmium-copper nanoparticles (nCdCu) as the most effective nanochelators were used for the development of ammonium chemosensors and enzyme-coupled Arg biosensors. The fabricated enzyme/nCdCu-containing bioelectrodes show wide linear ranges (up to 200 µM), satisfactory storage stabilities (14 days), and high sensitivities (A⋅M-1⋅m-2) to Arg: 1650, 1700, and 4500 for ADI-, ArgO- and ARG/urease-based sensors, respectively. All biosensors have been exploited to estimate Arg content in commercial juices. The obtained data correlate well with the values obtained by the reference method. A hypothetic scheme for mechanism of action of ammonium nanochelators in electron transfer reaction on the arginine-sensing electrodes has been proposed.

Recent Advances in Graphene-Based Nanocomposites for Ammonia Detection

The increasing demand to mitigate the alarming effects of the emission of ammonia (NH3) on human health and the environment has highlighted the growing attention to the design of reliable and effective sensing technologies using novel materials and unique nanocomposites with tunable functionalities. Among the state-of-the-art ammonia detection materials, graphene-based polymeric nanocomposites have gained significant attention. Despite the ever-increasing number of publications on graphene-based polymeric nanocomposites for ammonia detection, various understandings and information regarding the process, mechanisms, and new material components have not been fully explored. Therefore, this review summarises the recent progress of graphene-based polymeric nanocomposites for ammonia detection. A comprehensive discussion is provided on the various gas sensor designs, including chemiresistive, Quartz Crystal Microbalance (QCM), and Field-Effect Transistor (FET), as well as gas sensors utilising the graphene-based polymer nanocomposites, in addition to highlighting the pros and cons of graphene to enhance the performance of gas sensors. Moreover, the various techniques used to fabricate graphene-based nanocomposites and the numerous polymer electrolytes (e.g., conductive polymeric electrolytes), the ion transport models, and the fabrication and detection mechanisms of ammonia are critically addressed. Finally, a brief outlook on the significant progress, future opportunities, and challenges of graphene-based polymer nanocomposites for the application of ammonia detection are presented.

Strategies for the performance enhancement of graphene-based gas sensors: A review

Gas sensors have aroused much attention in recent years for the important effect in modern society. Graphene, with unique structure and characteristic properties, has been considered as a promising candidate for fabricating high-performance gas sensor. Great efforts in current research are directed towards exploiting various graphene-based gas sensors, but the core of gas sensing study is how to enhance the gas sensing performance. Herein, we propose a perspective that focuses on the strategies for sensing performance enhancement of graphene-based gas sensors. Several strategies are reviewed such as the modification of graphene with organic molecules, functionalization by metal oxide or noble metals, and nanostructural engineering. Particular emphasis is also provided to clarify the mechanism for the gas sensing enhancement. Further, the sensor device design is also concerned for the significant effect on reaching full potential of the gas sensing materials and realizing multifunctional integration. Finally, the opportunities and challenges for the development of gas sensors are pointed out.

An "on-off" fluorescent probe based on cucurbit[7]uril for highly sensitive determination of ammonia nitrogen in aquaculture water

A novel "on-off" fluorescent probe was synthesized for highly sensitive and ultra-trace determination of ammonia nitrogen in aquaculture water. Ammonium can react with formaldehyde and sodium hydroxide to form a ring substance (urotropine), which shows no fluorescence signal. Palmatine hydrochloride (PAL) can enter the hydrophobic cavity of cucurbit[7]uril (CB[7]), eventually forming a 1 : 1 host guest complex called PAL@CB[7] under neutral or acidic conditions, which has strong green fluorescence with the maximum excitation (λ_ex) wavelength at 343 nm, and the maximum emission (λ_em) wavelength at 500 nm, while urotropine has a fluorescence quenching effect on the fluorescence enhancement system of PAL@CB[7]. Therefore, a fluorescent chemosensor based on PAL@CB[7] and the reaction of ammonia nitrogen with formaldehyde was developed. The results indicate that the linearity range and the limit of detection of the proposed method are 1-300 μg L^-1 with a good correlation coefficient (r² = 0.9966) and 1.8 × 10^-2 μg L^-1, respectively. Under the optimal conditions, the method was employed for the detection of ammonia nitrogen in real aquaculture water samples, revealing high selectivity and sensitivity. In the future, the combination of the "on-off" fluorescence method, a portable hardware system and intelligent algorithms will provide technology support for the design of on-line sensors for measuring ammonia nitrogen in aquaculture water.

Induced Birefringence by Drop Cast in EFBG Ammonia Sensors

In this paper, an induced birefringence was observed on an ammonia sensor based on an etched fiber Bragg grating (EFBG) coated with an organic film. The film was prepared with a solution of the perylene derivative, along with the copolymer PCDTBT in chlorobenzene. The EFBG was coated by drop cast technique, and a split in the reflection band, characteristic of birefringence, was observed after deposition. The response of the two observed peaks as a function of time was modeled by a pair of exponentials that could represent two processes: adsorption followed by diffusion of the gas molecules in the microstructured film. Such phenomena alter the boundary conditions of the optical fiber propagating mode, which allows an indirect ammonia detection by monitoring the EFBG wavelength shift of the reflected peaks. The sensor was experimentally tested in a concentration range from 3 ppm to 41,700 ppm, and the calibrations curves were determined in a range from 27 ppm to 6960 ppm. The two observed peaks showed different sensitivities, which presents an intrinsic potential for multiparameter measurements. The split in the reflection band was hypothesized to be birefringence induced by the formation of an asymmetric film. This hypothesis was numerically evaluated and compared with the experimental results.

Facile All-Optical Method for In Situ Detection of Low Amounts of Ammonia

As a key precursor for nitrogenous compounds and fertilizer, ammonia affects our lives in numerous ways. Rapid and sensitive detection of ammonia is essential, both in environmental monitoring and in process control for industrial production. Here we report a novel and nonperturbative method that allows rapid detection of ammonia at low concentrations, based on the all-optical detection of surface-enhanced Raman signals. We show that this simple and affordable approach enables ammonia probing at selected regions of interest with high spatial resolution, making in situ and operando observations possible.

•

Novel method for detection of ammonia at concentrations below 1 ppm in just under 1 s

•

This approach allows local detection of ammonia amounts as low as 10⁴–10⁵ molecules

•

Method for sensitive direct monitoring of catalytic/electrocatalytic processes

•

The method allows following the dynamics of ammonia concentration change in real time

Recent Trends and Developments in Graphene/Conducting Polymer Nanocomposites Chemiresistive Sensors

The use of graphene and its derivatives with excellent characteristics such as good electrical and mechanical properties and large specific surface area has gained the attention of researchers. Recently, novel nanocomposite materials based on graphene and conducting polymers including polyaniline (PANi), polypyrrole (PPy), poly (3,4 ethyldioxythiophene) (PEDOT), polythiophene (PTh), and their derivatives have been widely used as active materials in gas sensing due to their unique electrical conductivity, redox property, and good operation at room temperature. Mixing these two materials exhibited better sensing performance compared to pure graphene and conductive polymers. This may be attributed to the large specific surface area of the nanocomposites, and also the synergistic effect between graphene and conducting polymers. A variety of graphene and conducting polymer nanocomposite preparation methods such as in situ polymerization, electropolymerization, solution mixing, self-assembly approach, etc. have been reported and utilization of these nanocomposites as sensing materials has been proven effective in improving the performance of gas sensors. Review of the recent research efforts and developments in the fabrication and application of graphene and conducting polymer nanocomposites for gas sensing is the aim of this review paper.

A Combined Experimental and First-Principle Calculation (DFT Study) for In Situ Polymer Inclusion Membrane-Assisted Growth of Metal-Organic Frameworks (MOFs)

A simple yet effective strategy was developed to prepare a metal-organic framework- (MOF-) based asymmetric membrane by depositing the Zeolitic imidazolate framework-8 (Zif-8) layer on the aminosilane-functionalized surface of a polymer inclusion membrane via an in situ growth process. During the extraction of the ligand molecules from the source to stripping compartment, metal ions react with ligand, and layers of Zif-8 were gradually grown onto aminosilane-modified polymer inclusion membrane (PIM). The properties of the surface-grown Zif-8 nanocrystalline layer were well characterized by powder X-ray diffraction, adsorption-desorption analysis, and scanning electron microscopy. The potential use of these Zif-8-supported PIM membranes for the separation of gases N2, CH4, and CO2 was evaluated at two temperatures (25 and 50°C) and pressures (1, 3, and 5 bar), by comparing the permeability and selectivity behavior of these membranes with neat PIM. The gas permeability of both pure PIM (PCO2=799.2 barrer) and PIM-co-MOF (PCO2=675.8 barrer) increases with the temperature for all three gases, and the permeation rate order was CO2 > CH4 > N2. The results showed that the presence of a layer of Zif-8 on the surface of the polymer inclusion membranes can get a slightly reduced permeability (~21%) but an enhanced selectivity of up to ~70% for CO2/CH4 and ~34% for CO2/N2. In the case of both membrane types, the ideal permselectivity decreases with the temperature, but this decrease was slightly more pronounced for the case of PIM-co-MOF. To understand more details about the electronic structure and optical and adsorption properties of Zif-8 and M+Zif-8 (M=N2,CH4,and CO2) compounds, the periodic plane-wave density functional theory (DFT) calculations were used. The electronic band structures and density of states for pure Zif-8 showed that this compound is metallic. Also, using DFT, the formation energy of M+Zif-8 compounds was calculated, and we showed that the CO2+Zif-8 composition is more stable than other compounds. This result suggests that the tendency of the Zif-8 compound to absorb the CO2 molecule is higher than that of other molecules. Confirming these results, DFT optical calculations showed that the affinity of the CO2+Zif-8 composition to absorb infrared light was greater than that of the other compounds.